应用FTP实现SN388和408UL仪器HCI与PC间的数据传输
|
摘要
本文通过对SN388、408 UL数字地震仪HCI与PC间数据传输问题的探讨,阐述了在野外生产条件下,如何利用FTP网络协议,借助FTP客户端软件或DOS下的FTP命令,实现仪器HCI&PRM中的参数数据与外部需要加载的数据间的相互传输和交换。同时,对一些FTP常用命令进行了介绍,并用实例阐述了SN388仪器FTP账户的设置,以及408 UL的HCI、PRM与SQC-Pro间的硬件连接与网络设置方法。
Through the discussion of the issue of data transmission between HCI and PC in SN388 and 408UL digital seismographs,the paper expounded how to use FTP network protocol and by the aid of FTP user software or FTP orders under DOS to implement mutual transmission and interchange between the parameter data in HCI & PRM apparatus and data needed to load onto the exterior.Meanwhile,the paper also introduced common-used orders of FTP and expounded the setup of FTP account of SN388 seismograph as well as the methods for hardware connection and setup of network among HCI,PRM and SQC-Pro in 408UL.
Through the discussion of the issue of data transmission between HCI and PC in SN388 and 408UL digital seismographs,the paper expounded how to use FTP network protocol and by the aid of FTP user software or FTP orders under DOS to implement mutual transmission and interchange between the parameter data in HCI & PRM apparatus and data needed to load onto the exterior.Meanwhile,the paper also introduced common-used orders of FTP and expounded the setup of FTP account of SN388 seismograph as well as the methods for hardware connection and setup of network among HCI,PRM and SQC-Pro in 408UL.
引文
1 Sercel公司.SN388 training course manual.2003
2 Sercel公司.408UL use′rs manual.2003
2 Sercel公司.408UL use′rs manual.2003
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心