引文
[1]Kurobane Y,Makino Y,Ochi K.Ultimate resistance ofunstiffened tubular joints[J].Journal of StructuralEngineering,1984,110(2):385―400.
[2]Dexter E M,Lee M M K.Static strength of axiallyloaded tubular k-joints I:Behavior[J].Journal ofStructural Engineering,1999,125(2):194―201.
[3]王伟,陈以一.节点半刚性钢桁架受压腹杆计算长度分析[J].工程力学,2005,22(5):131―135.Wang Wei,Chen Yiyi.Analysis of effective length ofcompressive braces in semi-rigid steel strusses[J].Engineering Mechanics,2005,22(5):131―135.(inChinese)
[4]邵铁峰,王伟,陈以一.网壳结构复杂多支管连接的试验研究[J].工程力学,2012,29(增II):144―148.Shao Tiefeng,Wang Wei,Chen Yiyi.Experimentalinvestigation on complex multi-planar joints of latticeshell structures[J].Engineering Mechanics,2012,29(Suppl II):144―148.(in Chinese)
[5]陈以一,沈祖炎,翟红,等.圆钢管相贯节点滞回特性的实验研究[J].建筑结构学报,2003,24(6):57―62.Chen Yiyi,Shen Zuyan,Zhai Hong,et al.Experimentalresearch on hysteretic property of unstiffened spacetubular joints[J].Journal of Building Structures,2003,24(6):57―62.(in Chinese)
[6]Wang W,Chen Y Y.Hysteretic behavior of the tubularjoints under cycling loading[J].Journal of ConstructionSteel Research,2007,63:1384―1395.
[7]孟宪德,王伟,陈以一,等.X型厚壁圆管相贯节点的平面外受弯抗震性能研究[J].建筑结构学报,2009,30(5):126―131.Meng Xiande,Wang Wei,Chen Yiyi,et al.Research onseismic behavior of unstiffened thick-walled tubularX-joints under out-of-plane bending[J].Journal ofBuilding Structures,2009,30(5):126―131.(in Chinese)
[8]孟宪德.X型圆钢管相贯节点平面外受弯滞回性能研究[D].上海:同济大学,2010.Meng Xiande.Research on hysteretic behaviour ofunstiffened CHS X-joints under out-of-plane bending[D].Shanghai:Tongji University,2010.(in Chinese)
[9]李国强,沈祖炎.半刚性连接钢框架弹塑性地震反应分析[J].同济大学学报,1992,20(2):123―127.Li Guoqiang,Shen Zuyan.Analysis of elastic-plasticseismic responses of semi-rigidly connected steel frames[J].Journal of Tongji University,1992,20(2):123―127.(in Chinese)
[10]Roeder C W,Douglas A F.Experimental results forseismic resistant steel moment frame connections[J].Journal of Structural Engineering,1996,122(6):581―588.
[11]prEN 1993-1-8:2002,Eurocode 3 Design of steelstructures Part 1-8:Design of joints[S].London,European Committee for Standardisation(CEN),April2002.
[12]Tschemmernegg F,Humer C.The design of structuralsteel frames under consideration of the non-linearbehavior of joints[J].Journal of Constructional SteelResearch,1988,11:73―103.
[13]陈以一,沈祖炎,大井谦一,高梨晃一.反夏变动轴力作用下钢柱的数值分析模型[J].同济大学学报,1994,22(4):499―504.Chen Yiyi,Shen Zuyan,Ohi K,Takanashi K.A numericalanalysis model for steel columns subjected to cyclicvarying axial load[J].Journal of Tongji University,1994,22(4):499―504.(in Chinese)
[14]周锋.宽肢薄腹钢柱滞回性能的试验研究与数值分析[D].上海:同济大学,2002.Zhou Feng.Experimental study and numerical analysis ofhysteretic behavior of steel column with bigwidth-to-thickness-ratio plate[D].Shanghai:TongjiUniversity,2002.(in Chinese)
[15]Lu L H,Winkel G D,Yu Y,Wardenier J.Deformationlimit for the ultimate strength of hollow section joints[C].Melbourne:Sixth International Symposium on TubularStructures,1994:341―347.
[16]Yura J A,Zettlemoyer N,Edwards I F.Ultimate capacityequations for tubular joints[C].Houston:OffshoreTechnology Conference,1980:3690―3703.
[17]杜纯领.X型圆钢管相贯节点平面外抗弯性能研究[D].上海:同济大学,2007.Du Chunling.Study on out-of-plane bending properties ofunstiffened X-type tubular joint[D].Shanghai:TongjiUniversity,2007.(in Chinese)
[18]JGJ101-96,建筑抗震试验方法规程[S].北京:中国建筑工业出版社,1996.JGJ 101-96,Specification of testing methods forearthquake resistant building[S].Beijing:ChinaArchitecture&Building Press,1996.(in Chinese)
[19]GB50017-2003,钢结构设计规范[S].北京:中国计划出版社,2003.GB 50017-2003,Design code for steel structure[S].Beijing:China Planning Press,2003.(in Chinese)