模拟井固井事故处理浅析

详细信息    查看全文 | 推荐本文 |

英文篇名：Analysis on Treatment of Cementing Accident in Simulated Well 作者：刘卫娟 ; 徐影 ; 张晓昂 英文作者：LIU Wei-juan;XU Ying;ZHANG Xiao-ang;Henan Yuzhong Geological Prospecting Engineering Company;Drilling Engineering Technology Research Center of Henan Province; 关键词：模拟井 ; 固井质量 ; 事故处理 ; 套铣加反扣 英文关键词：simulation well;;cementing quality;;accident treatment;;casing milling and reverse buckling 中文刊名：JZGC 英文刊名：Value Engineering 机构：河南豫中地质勘察工程公司;河南省能源钻井工程技术研究中心; 出版日期：2018-11-07 出版单位：价值工程 年：2018 期：v.37;No.510 语种：中文; 页：JZGC201834048 页数：2 CN：34 ISSN：13-1085/N 分类号：118-119

摘要

XMJ-01井在固模拟套管后48小时,先后经过四次测井均解释判定XMJ-01井模拟套管固井质量不合格。经分析讨论,决定采用套铣加反扣的技术措施,取出套管再固井的方案解决此次事故。经45天的施工,取出全部套管,第二次套管固井吸取第一次固井的经验教训,圆满完成固井工作。
        After 48 hours of simulated casing cementing, the simulated casing cementing quality of XMJ-01 well was judged to be unqualified on the base of four log interpretation. Through analysis and discussion, it is decided to adopt the measures of casing milling and reverse buckling to remove casing and re-cementing to solve the accident. After 45 days of operation, the casing is taken out, the second casing cementing takes the experience and lessons of the first cementing, and the cementing work is successfully completed.

引文

[1]伍良庆.川孝93井固井事故处理措施[J].石油钻探技术,1998,26(4):30-33.
    [2]曹东风,胡向志.大口径煤矿地面瓦斯抽排孔的施工工艺[C].煤层气勘探开发理论与实践,2007:332-336.
    [3]王延文,王鑫,郝荣明.高效铣环在胜科1井事故处理中的应用[J].石油钻探技术,2007,35(6):44-46.
    [4]吴玉禄,王震雨.套铣打捞新技术的研究与应用[J].石油钻探技术,2002,30(5):33-34.
    [5]罗曦,李爱勇,马明学,孙向阳.电阻率各向异性模拟井设计[J].石油仪器,2014,28(1):35-38,99.
    [6]张潇,刘磊.新型套铣解卡技术在塔河油田的应用[J].内蒙古石油化工,2015(12):111-112.
    [7]王华南,石张泽,许清海.双管封隔器套铣技术[J].技术研究,2016(3):74-75.
    [8]殷仕清,范小波,高智.封隔器解卡打捞工艺技术在川西气井中的应用[J].西部探矿工程,2012(3):71-74.