导致拾震器常数标定进入误区的研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在拾震器的标定过程中 ,当 Ri≤ 1 0 MΩ 时 ,空气阻尼太大 ,所测定的 D10 结果不准确 ,从而导致 S1、a12 、RD 以及 C、β12 均不准确 ,所得 V也不准确 ,同时记录地震的波形也会受到影响 ,为此建议在标定和工作时 ,要串上分压电阻 R,以此为导向使得放大器输入电阻 Ri≥1 0 MΩ时 ,所得结果才能符合规范要求 ,本研究通过多次测试均达到良好的效果。
in the scaling of seismic geophone,the air damping will be too large to measure D 10 accurately,thus causing S1,a12,RD,and C all inaccurate.The V we get will be inaccurate also,and the waveform of seismic record will be affected simultaneously.So we suggest we should connect in series a resistance R when scaling.Only if the inputting resistance of amplifier Ri≥10MΩ,the results will meet the need of the criteria.The tests all get good effect in the study.
引文
[1] 地震台站观测规范[S].国家地震局编,北京;地震出版社,1990.
    [2] 地震仪器概论[S].中国科学院地球物理研究所编.北京:地震出版社,1975.
    [3] 地震观测技术[S].国家地震局科技监测司编.北京:地震出版社,1995.
    [4] 地震台站仪器的使用与维修[S].国家地震局兰州地震研究所编.青海人民出版社,1985.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心