基于FLAC~(3D)的调压井开挖三维应力应变分析

英文篇名：Three-dimensional Stress-strain Analysis of Surge Chamber Structure by FLAC~(3D)
中文刊名：云南农业大学学报(自然科学版)
英文刊名：Journal of Yunnan Agricultural University(Natural Science)
作者：李泽 ; 姚激
英文作者：LI Ze ; YAO Ji(Department of Engineering Mechanics ; Architecture and Civil Engineering Institute ; Kunming University of Science and Technology ; Kunming 650051 ; China)
中文关键词：有限差分法 ; FLAC3D ; 调压井 ; 开挖 ; 锚杆
英文关键词：finite difference calculus ; FLAC3D software ; surge chamber structure ; excavation ; anchor arm
出版日期：2011-01-15
机构：昆明理工大学建筑工程学院工程力学系;
年：2011
期：01
出版单位：云南农业大学学报(自然科学版)

摘要

采用有限差分法大型商用软件FLAC3D对某水电站调压井井筒的开挖过程进行三维非线性模拟,采用三维弹塑性本构模型,构建了调压井的三维计算数值模型,准确模拟边坡坡体结构、初始地应力、施工开挖过程等,并采用FLAC3D中的锚杆单元模拟调压井开挖时的锚固措施,分析锚杆布置的合理性与安全性,根据计算结果分析调压井所处边坡区域的岩体在开挖施工期及运行期典型工况下的应力和变形状况,对调压井的整体、局部稳定性进行了评价分析。
In this study,FLAC3D software was employed to proceed 3-D nonlinearly simulating analysis on surge chamber structure for a hydropower station.The elastic-plasticity constitutive equations were used to establish numerical model of surge chamber structure,and geometrical boundary condition,initial ground stress and excavation works were simulated.In the model,the anchor arms elements were located in the surround rock of surge chamber structure on the excavating process.Stress-strain of structure had been analyzed,The stability of surround rock was evaluated.

引文

[1]ITASCA Consulting Group Inc.Fast lagrangian analysisof continua in dimensions.Version 3.0,User’s mannuel[S].USA:Itasca Consulting Group Inc.,2005.
    [2]龚纪文,席先斌,王岳军,等.应力与变形的数值方法——数值模拟软件FLAC介绍[J].华东地质学院学报,2002,25(3):220-227.
    [3]陈育民,徐顶平.FLAC/FLAC3D基础与工程实例[M].北京:中国水利水电出版社,2009.
    [4]周维垣,杨强.岩石力学数值计算方法[M].北京:中国电力出版社,2005.
    [5]寇晓东,周维垣,杨若琼.FLAC3D进行三峡船闸高边坡稳定性分析[J].岩石力学与工程学报,2001,20(1):6-10.
    [6]廖秋林,曾钱帮,刘彤.基于ANSYS平台复杂地质体FLAC3D模型的自动生成[J].岩石力学与工程学报,2005,24(6):1010-1013.
    [7]孙礼健,朱元清.初始地应力场分析方法的研究[J].地震地磁观测与研究,2008,29(3):14-21.
    [8]DL/T5058-1996,水电站调压室设计规范[S].北京:中国水利水电出版社,1997.