引文
1,武铜柱:大型立式油罐发展综述,石油化工设备技术,2004,25(3)。
2,李国琛:大型变截面圆柱罐壁和罐底的应力分析,力学与实践,1979,1(4)。
3,傅强陈志平等:弹性基础上大型石油储罐的应力分析,化工机械,2002,29(4)。
4,陈志平沈建民等:基于组合圆柱壳理论的大型油罐应力分析,浙江大学学报(工学版),2006,40(9)。
5,Chen Z P,Duan Y Y,Shen J M,Jiang J L:A simplified method for calculating the stress of large storage tank wall,Proc.IMechE Part E:J.Process Mechanical Engineering,2007,221(3).
6,陈志平:大型非锚固储油罐应力分析与抗震研究(博士论文),浙江大学,2006。
7,陈志平王飞等:大型非锚固原油储罐应力分析,机械工程学报,2006,42(11)。
8,WUTianyun:More accurate method devised for tank-bottom an-nular plate design,Oil&Gas,1996,94(21).
9,WU Tianyun,LIU Guorong:Comparison of design methods for tank-bottom annular plate and concrete ring wall,Internation Journal of Pressure Vessels and Piping,2000,77(3).
10,李多民宋虎堂等:12.5×104m3原油储罐应力测试及分析,压力容器,2005,22(3)。
11,沈建民:大型油罐的静强度及动力响应分析(硕士论文),浙江大学,2006。
12,陈志平葛颂沈建民等:大型原油储罐有限元分析建模的新方法,浙江大学学报(工学版),2006,40(6)。
13,陈志平程香:在役大型原油储罐安全评估的新方法,第十届全国高等学校过程装备与控制工程专业校际交流会论文集,化学工业出版社(北京),2006。
14,程香陈志平等:基于基础沉降监测的在役大型油罐寿命预测技术,压力容器,2007,24(1)。
15,王飞:大型非锚固原油储罐数值模拟及结构优化(硕士论文),浙江大学,2006。
16,段媛媛刘义君等:15×104m3超大型石油储罐结构优化分析,压力容器,2006,23(12)。
17,陈志平蒋伟华沈建民等:大型油罐大角焊缝处峰值应力分析,压力容器,2005,22(5)。
18,庄茁刘焕忠等:储液罐动力响应中的能量分析,第六届全国压力容器学术会议——压力容器先进技术精选集,机械工业出版社(北京),2005。
19,Hamdan F H:Seismic behavior of cylindrical steel liquid storage tanks,Journal of Constructional Steel Research,2000(53).
20,Haroun,Medhat A:Implications of recent nonlinear analyses on seismic standards of liquid storage tanks,Technical Council on Lifeline Earthquake Engineering Monograph Seattle,WA,USA,American Society of Civil Engineers,Reston,VA,USA,1999(16).
21,Priestley M J N et al:Seismic Design of Storage Tanks,Recommendations of a Study Group of the New Zealand National Society for Earth quake Engineering,1986.
22,American Water Works Association:Welded Steel Tanks for Wa-ter Storage,AWWA Standard D100,1984.
23,JIS B8501-1985钢制焊接油罐结构,日本工业标准委员会。
24,葛颂陈志平等:立式储液罐象足屈曲的准静态数值模拟,压力容器,2006,23(1)。
25,葛松:大型立式储液罐抗震分析的数值模拟研究(硕士论文),浙江大学,2006。
26,中国石油化工总公司抗震办公室(译):洛马普里埃塔地震考察,地震出版社(北京),1991。
27,Uwe Hornung,Helmut Saal:Buckling loads of tank shells with imperfection,Non-linear Mechanics,2002(37).
28,Hbner A J,Teng G.Saal H:Buckling behaviour of large steel cylinders with patterned welds,International Journal of Pressure Vessels and Piping,2006(83).
29,Aghajari S,Abedi K,Showkati H:Buckling and post-buckling behavior of thin-walled cylindrical steel shells with varying thick-ness subjected to uniform external pressure,Thin-Walled Struc-tures,2006(44).
30,陈宏湛沈成康:组合圆柱壳静态屈曲的几个影响因素分析,力学季刊,2001,22(2)。
31,朱劲平:大型立式圆柱形油罐“象足”屈曲研究(硕士论文),浙江大学,2007。