引文
[1]孙静,袁晓铭,陶夏新.共振柱试验机试验误差分析[J].哈尔滨工业大学学报,2007,39(4):510–513.(SUN Jing,YUAN Xiao-ming,TAO Xia-xin.Error analysis of resonantcolumn device tests[J].Journal of Harbin Institute ofTechnology,2007,39(4):510–513.(in Chinese))
[2]俞培基,秦蔚琴.在共振柱仪上研究接触面的动力变形特性[J].水利学报,1995(1):81–85.(YU Pei-ji,QIN Wei-qin.Cyclic deformation behavior of interface studied on resonantcolumn test device[J].Journal of Hydraulic Engineering,1995(1):81–85.(in Chinese))
[3]袁晓铭,孙静.非等向固结下砂土最大动剪切模量增长模式及Hardin公式修正[J].岩土工程学报,2005,27(3):264–269.(YUAN Xiao-ming,SUN Jing.Model ofmaximum dynamic shear modulus of sand under anisotropicconsolidation and revision of Hardin’s formula[J].ChineseJournal of Geotechnical Engineering,2005,27(3):264–269.(in Chinese))
[4]袁晓铭,孙静.多功能共振柱刚性试件试验的可靠性分析[J].岩石力学与工程学报,2005,24(4):610–615.(YUAN Xiao-ming,SUN Jin.Reliability of multipurposeresonant column device in testing rigid specimens[J].ChineseJournal of Rock Mechanics and Engineering,2005,24(4):610–615.(in Chinese))
[5]曹继东,陈正汉,王权民.软粘土的共振柱试验研究[J].四川建筑科学研究,2004,30(4):69–71.(CAO Ji-dong,CHEN Zhen-han,WANG Quan-ming.The resonant columntest study of soft clay in amoy[J].Building Science Researchof Sichuan,2004,30(4):69–71.(in Chinese))
[6]吕小飞,陈培雄,杨义菊,等.海洋粉质粘土共振柱试验研究[J].世界地震工程,2010,26(增刊1):1–5.(LüXiao-fei,CHEN Pei-xiong,YANG Yi-ju,et al.The resonantcolumn test study on marine silty clay[J].World EarthquakeEngineering,2010,26(S1):1–5.(in Chinese))
[7]HARDIN B O,DRNEVICH V P.Shear modulus anddamping in soils:Measurement and parameter effects[J].Journal of the Soil Mechanics and Foundations Division,ASCE,1972,98(6):603–624.
[8]SHERIF M A,ISHIBASHI I.Dynamic shear moduli for drysands[J].Journal of the Geotechnical Engineering Division,ASCE,1976,102(11):1171–1184.
[9]SHERIF M A,ISHIBASHI I,GADDAH A H.Damping ratiofor dry sands[J].Journal of the Geotechnical EngineeringDivision,ASCE,1977,103(7):743–756.
[10]BAI L D.Preloading effects on dynamic sand behavior byresonant column tests[D].Berlin:Technical University Berlin,2011.
[11]SILVER M L,SEED H B.Deformation characteristics ofsands under cyclic loading[J].Journal of the Soil Mechanicsand Foundations Division,ASCE,1971,97(8):1081–1098.
[12]RAY R P,WOODS R D.Modulus and damping due touniform and variable cyclic loading[J].Journal ofGeotechnical Engineering,ASCE,1988,114(8):861–876
[13]LI X S,CAI Z Y.Effects of low-number previbration cycleson dynamic properties of dry sand[J].Journal of Geotechnicaland Geoenvironmental Engineering,ASCE,1999,125(11):979–987.
[14]DRNEVICH V P,RICHART F E Jr.Dynamic prestraining ofdry sand[J].Journal of the Soil Mechanics and FoundationsDivision,ASCE,1970,96(2):453–469.
[15]WICHTMANN T,TRIANTAFYLLIDIS T.Influence of acyclic and dynamic loading history on dynamic properties ofdry sand,part I:cyclic and dynamic torsional prestraining[J].Soil Dynamics and Earthquake Engineering,2004,24(2):127–147.
[16]TATSUOKA F,IWASAKI T,FUKUSHIMA S,et al.Stressconditions and stress histories affecting shear modulus anddamping of sand under cyclic loading[J].Soils andFoundations,1979,19(2):29–43
[17]LI X S,YANG W L.Effects of vibration history on modulusand damping of dry sand[J].Journal of Geotechnical andGeoenvironmental Engineering,ASCE,1998,124(11):1071–1081.
[18]YOUN J U,CHOO Y W,KIM D S.Measurement ofsmall-strain shear modulus G(max)of dry and saturated sandsby bender element,resonant column,and torsional sheartests[J].Canadian Geotechnical Journal,2008,45(10):1426–1438.
[19]HARDIN B O,BLANDFORD G E.Elasticity of particulatematerials[J].Journal of Geotechnical Engineering,ASCE,1989,115(6):788–805.
[20]CUNDALL P A,STRACK O D L.A discrete numericalmodel for granular assemblies[J].Geotechnique,1979,29(1):47–65.
[21]CHEN Y C,ISHIBASHI I.Dynamic shear modulus andevolution of fabric of granular materials[J].Soils andFoundations,1990,30(3):1–10.
[22]CHEN Y,HUNG H.Evolution of shear modulus and fabricduring shear deformation[J].Soils and Foundations,1991,31(4):48–160.