用于阻尼器结构不锈钢丝金属橡胶元件力学性能试验研究

英文篇名：Experimental Research on Mechanical Properties of Stainless Steel Metal Rubber Elements for Damper Structure
中文刊名：震灾防御技术
英文刊名：Technology for Earthquake Disaster Prevention
作者：赵亚哥白 ; 佴磊 ; 毛晨曦 ; 李素超 ; 李惠
英文作者：Zhao Yagebai1 ; 4) ; Er Lei1) ; Mao Chenxi2) ; Li Suchao3) and Li Hui3) 1) College of Construction Engineering ; Jilin University ; Changchun 130026 ; China 2) Institute of Engineering Mechanics ; China Earthquake Administration ; Harbin 150080 ; China 3) School of Civil Engineering ; Harbin Institute of Technology ; Harbin 150090 ; China 4) Northeast Forestry University ; Harbin 150040 ; China
中文关键词：金属橡胶 ; 阻尼器 ; 压缩 ; 滞变性能
英文关键词：Metal rubber ; Damper ; Compression ; Hysteretic property
出版日期：2010-09-15
机构：吉林大学建设工程学院;东北林业大学;中国地震局工程力学研究所;哈尔滨工业大学土木工程学院;
年：2010
期：03
出版单位：震灾防御技术

摘要

为研究金属橡胶材料用作土木工程结构消能减震阻尼器的力学性能,本文针对不同成型密度的金属橡胶阻尼元件,分别在静力、动力荷载作用下进行了压缩性能试验,测试加载幅值、循环加载次数、元件成型密度、动力加载频率等因素对金属橡胶元件阻尼耗能的影响规律。研究结果表明,金属橡胶材料有着良好的弹性和阻尼特性,其滞变耗能能力随着成型密度、加载幅值的增加而增大;加载频率和加载次数对金属橡胶滞变性能几乎没有影响。
In order to investigate mechanical properties of stainless steel metal rubber that will be used as seismic reduction and energy dissipation with dampers in civil structures,metal rubber elements with various nominal densities tests were performed in this paper.Static and dynamic compression load were applied on the elements.The influence of several important factors was tested,which includes strain amplitude,cyclic number nominal density and frequency of loading on the damping energy dissipation of metal rubber.Our experimental results indicate that metal rubber has good elasticity and damping ability.With the increase of nominal density and strain amplitude,the metal rubber elements has larger energy dissipation capability.In contrast,Frequency and cyclic number of applied load have little influence on hysteretic properties of the metal rubber.

引文

寇宏宁,刘国权,杨建春等,2006.金属橡胶用Cr-Ni-Mn系不锈钢丝的微观组织及力学性能研究.航空材料学报,26(4):32—33.
    李爱群,2007.工程结构减振控制.北京:机械工业出版社.
    李惠,毛晨曦,2003.新型SMA耗能器及结构地震反应控制实验研究.地震工程与工程振动,23(1):133—139.
    切戈达耶夫,穆柳金,科尔特平编著,李中郢译,2000.金属橡胶构件的设计.北京:国防工业出版社.
    BSSC,2004.Recommended provisions for seismic regulations for newbuildings and other structures(FEMA450).Washington:FE-MA.
    Jiang Hongyuan,Zhang Ruihua,Xia Yuhong,2006.Stationary dynamic characteristics analysis ofnew squeezed film damper.Chinese Journal of Mechanical Engineering,19(3):442—445.
    Jiang Hongyuan,Ao Hongru,XiaYuhong et al.,2001.Research onman-ufacturing technology and application of metal rubber.Mechanical Technologist,35(2):35—36.
    Li Yuming,Zheng Jian,Bai Hongbai,2003.Dynamic mechanic smodel of metal-rubber materials.Chinese Journal of Materials Research,15(5):499—504.
    Tinker M.L.,Cuthins M.A.,1992.Damping phenomenon in a wire rope vibration isolator.Journal of Sound and Vibration,157(1):7—18.