引文
[1]S G Mallat.A theory for multiresolution signal decomposition:thewavelet representation[J].Pattern Analysis and Machine Intelligence,1989,11(7).674-693.
[2]王军良,周振山,薛娴,等.锥形束CT图像与计划CT图像配准方法分析[J].中国医学物理学杂志,2011,28(1):2386-2388.
[3]甄鑫,周凌宏.放射治疗中CBCT关键技术的应用研究[D].广州:南方医科大学,2008.
[4]吴雷,薛跃辉,李万平,等.锥形束CT在放疗中的应用[J].临床军医杂志,2012,40(1):244-246.
[5]王庆根.基于PaxScan2520平板探测器的X射线成像处理系统研究[D].北京:北京机械工业自动化研究所,2005.
[6]胡伟刚,张真,常熙,等.兆伏级锥形束CT影像质量定量分析[J].中华放射肿瘤学杂志,2009,19(3):226-229.
[7]杨俊,甄鑫,卢文婷,等.基于圆扫描轨迹的锥形束CT重建与环形伪影消除[J].南方医科大学学报,2009,29(12):2379-2382.
[8]Han X,Pearson E,Bian J,et al.Preliminary investigation of dose allocation inlow-dose cone-beam CT[A].2010 IEEE Nuclear Science SymposiumConferenceRecord[C].Knoxville,TN:NSS/MIC,2010:2051-2054.
[9]ZHONG J M,NING R,CONOVER D.Image denoising based onmultiscale singularity detection for cone beam CT breast imaging[J].IEEE Transactions on Medical Imaging,2004,23(6):696-704.
[10]谭毅华,田金文,柳健.基于小波局部统计特性的图像去噪方法[J].信号处理,2005,21(3):296-311.
[11]Kuidong Huang,Dinghua Zhang.Adaptive filter for serial sliceimages of cone-beam computed tomography[A].InternationalConference on Bioinformatics and Biomedical Engineering[C].Shanghai:ICBBE,2008.
[12]Zachary Kelm,Daniel J,Blezek Bartholmai.Optimizing non-local means for denoinsing low dose CT[R].The InternationalConference on Symposium on Biomedical Imaging[C].Boston,MA,2009:662-665.
[13]刘静,陆利忠,闫镔,等.基于分块处理的三维非局部均值降噪算法[J].计算机工程,2010,36(7):220-223.
[14]孙志新,李山有.小波分析在地震数据噪声处理中的应用研究[D].北京:中国地震局工程力学研究所,2008.
[15]姚成,司玉娟,郎六琪,等.改进的基于小波变换的QRS波检测算法[J].吉林大学学报(信息科学版),2011,29(5):401-406.
[16]王明阳,周一宇,姜文利.基于固有模态函数域滤波方法[J].信号处理,2007,23(2):306-308.
[17]王京港,程明霄,林锦国,等.基于小波变换的拉曼光谱仿真分析[J].计算机仿真,2010,27(8):334-336.
[18]Pan Q,Zhang L.Two denoising methods by wavelet transform[J].IEEE Trans.Signal Processing,1999,47(12):3401-3406.
[19]侯建华,田金文.基于小波及其统计特性的图像去噪方法研究[D].武汉:华中科技大学,2007.
[20]Yiqiang Yang,Nobuyuki Nakamori.Denoising of cone beam CTimage using wavelet transform[A].Medical Imaging 2002:ImageProcessing[C].San Diego,CA,,2002,4684:1077-1084.
[21]孙倩,彭玉华,尹勇,等.一种基于系数分类的CBCT图像去噪新方法[J].生物医学工程学杂志,2010,27(3):658-665.
[22]虞刚,尹勇.CBCT图像去噪的研究[D].济南:山东大学,2011.
[23]Zikuan Chen,Ruola Ning.Breast volume denoising and noisecharacterization by 3D wavelet transform[J].Computerized MedicalImaging and Graphics,2004,28(5):235-246.
[24]KALIFA J,LAINE A,ESSER P D.Regularization in tomographicreconstruction using thresholding estimators[J].IEEE Transactionson Medical Imaging,2003,22(3):351-359.
[25]马俊峰,杨立才.三维锥束CT图像重建加速技术研究[D].济南:山东大学,2011.
[26]翟静,潘晋孝.三维锥束CT中滤波反投影算法的研究[D].太原:中北大学,2008.
[27]杨美琴,鲍旭东.锥形束CT短扫描重建及加速算法[D].广州:东南大学,2009.
[28]Tam KC,Samasekera S.Region-of-interest cone-beam CTwith a spiral scan[M].SPIE,1998,3336:274-283.
[29]Kudo H,Noo F.Quasi-exact filtered backprojection algorithm forlong object problem in helical cone-beam tomography[J].IEEETrans Med Imag,2000,19(9):902-921.
[30]Katsevich A.Theoretically exact filtered backprojection-type inversion algorithm for Spiral CT[J].SIAM J Appl Math,2002,62(6):2012-2026.
[31]侯延露.三维重建算法优化研究[D].北京:首都师范大学,2006.
[32]邓甜,邓倩妮.锥束CT的FDK算法与CUDA实现[J].微型电脑应用,2011,27(6):46-49.
[33]张剑,陈志强.三维锥形束CT成像FDK重建算法发展综述[J].中国体视学与图像分析,2005,10(20):116-121.
[34]陈凌剑,陈武凡.Lambda Tomography框架下的医学CT图像重建[D].广州:南方医科大学,2008.
[35]康晓月,王明泉.基于三维图像重建的一种窄角锥束CT扫描方式[J].中国科技信息,2009,(24):23-24.
[36]Hiroyuki Kudo,Tsuneo Saito.Helical-scan computed tomography usingcone-beam projections[A].Nuclear Science Symposium and MedicalImagingConference[C].SantaFe,NM,USA,1991(3):1958-1962.
[37]张蔚.锥束CT重建算法的实现及校正研究[D].广州:东南大学,2009.
[38]甄祺.基于圆轨迹X射线三维CT的图像重建算法研究[D].太原:中北大学,2007.
[39]Grass M.Angular weighted hybrid cone-beam CT reconstructionfor circular trajectories[J].Phys Med Biol,2001,46(6):1595-1610.
[40]Liu Y,Liu H.Half-scan cone-beam CT fluoroscopy with multiplex-ray sources[J].Med Phys,2001,28(7):1466-1471.
[41]曾凯,陈志强,张丽,等.基于同心圆轨道的锥形束CT重建算法[J].清华大学学报(自然科学版),2004,44(6):725-727.
[42]张东平,张定华,张丰收.一种基于Grengeat公式的锥形束CT重建算法研究[J].2008,13(9):1649-1654.
[43]黄静,马建华,陈凌剑,等.基于FDK框架的锥形束Pseudo-LT优质重建[J].南方医科大学学报,2009,29(10):2094-2097.
[44]蔚慧甜,杨海,薛迎,等.基于变螺旋距螺旋FDK重建算法的研究[J].电子测试,2011,(7):8-10.
[45]邹永宁,谭辉,黄亮.CT图像重建加速的几种方法[J].计算机系统应用,2009,(4):167-170.