引文
Brincker, R., Bolton, B., and Brandt, A., 2011, Calibration and processing of geophone signals for structuralvibration measurements: Structural Dynamics, 3,Conference Proceedings of the Society for ExperimentalMechanics Series, 12, 1375 – 1379.
Chen, J. Y., Gong, J. T., Pang, J., and Xi, H., 2007,Research on technology and development of geophones:Computing Techniques for Geophysical and GeochemicalExploration (in Chinese), 29(5), 382 – 385.
Dong, S. X., and Zhang, C. Y., 2000, Seismic geophone property and precise seismic exploration: GeophysicalProspecting for Petroleum (in Chinese), 39(2), 124 –130.
Hons, M. Stewart, R., Hauer, G., Lawton, D., and Bertram,M. B., 2008, Accelerometer versus geophone response-Afield case history: 70th Conference & TechnicalExhibition, EAGE, Extended Abstracts, B003.
Lansley, M., Laurin, M., and Ronen, S., 2007, Land 3D:Groups or single sensors? Cables or radio? Geophysicaland operational considerations: 77th Ann. Internat. Mtg.,Soc. Explor. Geophys., Expanded Abstracts, 6 – 10.
Lansley, M., Laurin, M., and Ronen, S., 2008, Modern land recording systems: How do they weigh up?: The LeadingEdge, 27(7), 888 – 894.
Li, G. L., Chen, G., and Zhong, J. Y., 2009, Analysis of geophone properties effects for land seismic data:Applied Geophysics, 6(1), 93 – 101.
Li, Q. Z., 1994, The way to obtain a better resolution inseismic prospecting: Petroleum Industry Press, Beijing.
Lu, W. X., and Du, R. S., 2006, Measurement information signal analysis in mechanical engineering: HuazhongUniversity of Science and Technology Press, Wuhan, 80– 85.
Lv, G. H., 2005, Application of a new generation of geophone to improve seismic acquisition in onshoreoffshore transition areas: Applied Geophysics, 2(4), 235– 240.
Lv, G. H., 2009, Analysis on principles and performance of seismic geophone and relevant issues: GeophysicalProspecting for Petroleum (in Chinese), 48(6), 531 –543.
Mancini, F., Mougenot, J. M., and Suiter, J., 2008,Comparison of conventional geophones versus digitalsensor - Preliminary results from 2D field test exercise:70th Conference & Technical Exhibition, EAGE,Extended Abstracts, B015.
Pain, H. J., 2005, The physics of vibrations and waves (6th Edition), Wiley, New York.
Piersol, A. G., and Paez, T. L., 2009, Harris’ shock and vibration handbook (6th edition): McGraw-Hill, NewYork, USA.
Savazzi, S., and Spagnolini, U., 2008, Wireless geophonenet works for high-density land technologies andacquisition: Future potential: The Leading Edge, 27(7),882 – 886.
Shan, G. Y., Han, L. G., Zhang, L. H., and Dong, S. X.,2009, Experimental study on piezoelectric geophonein high resolution seismic exploration: GeophysicalProspecting for Petroleum (in Chinese), 48(1), 91 – 95.
Sheriff, R. E., and Geldart, L. P., 1995, Explorationseismology: Cambridge University Press, UK.
Stotter, C., and Angerer, E., 2011, Evaluation of 3C microe lectromechanical system data on a 2D line: Directcomparison with conventional vertical-componentgeophone arrays and PS-wave analysis: Geophysics,76(3), B79 – B87.
Stotter, C., Angerer, E., and Herndler, E., 2008, Comparison of single sensor 3C MEMS and conventional geophonearrays for deep target exploration: 78th Ann. Internat.Mtg., Soc. Explor. Geophys., Expanded Abstracts, 173 –177.
Tao, G., Zhang, X. L., Liu, X. R., Chen, S. H., and Liu, T. Y.,2009, A new type of fiber Bragg grating based seismicgeophone: Applied Geophysics, 6(1), 84 – 92.
Wu , Z . Y. , 1 9 9 2 , Measurement technology an dmeasurement signal processing: Tsinghua UniversityPress, Beijing.
Xiong, Z., 2009, High precision 3-D seismic-Part I Dataacquisition: Progress in Exploration Geophysics (inChinese), 32(1), 1 – 11.
Yuan, X. G., 1986, Sensors technical handbook: National Defense Industry Press, Beijing, 670 – 672.
Zheng, J. L., Ying, Q. X., and Yang, W. L., 2000, Signals and systems: Higher Education Press, Beijing.