远程参数自适应控制技术的研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用自适应有限脉冲响应滤波器的多通道逆向控制方法及其自适应滤波器的实现方法,使多通道振动台模拟试验系统的系统响应逼近于期望响应信号,并且给出了利用此算法进行的模拟结果曲线。试验结果表明,采用这种方法控制振动台模拟试验系统,精确地再现了期望响应信号,满足了试验系统的要求。
A multi-channel inverse control method using adaptive finite impulse response filters and a realization method for adaptive filters are proposed.The method is adopted to make system real response of multi-channel shaking table simulation testing system approach the expected signals. And a shaking table simulation test was carried out by using this method in the paper.The result proved that the method was used in a shaking table simulation testing system so that the desired response reappeared accurately and met.
引文
[1]程永金.道路模拟试验系统的关键技术—远程参数控制技术[J].试验技术与试验机,2001.
    [2]王霄锋,杨春伟,杜永昌.汽车道路模拟算法研究[J].仪器技术与传感器,2004.10:0022~0025.
    [3]田永波.电压伺服地震模拟振动台的数字控制.武汉理工大学硕士论文,2004.5.
    [4]高鹰,谢胜利.一种变步长LMS自适应滤波算法及分析[J].电子学报,2001,9(28):1094~1097.
    [5]张贤达.现代信号处理.北京:清华大学出版社,1995.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心