摘要
文章讨论和研究了基于图像的定位技术原理,根据对得到近似为圆形的目标图像的特征分析,提出了一种新的边缘检测方法,介绍了具体的边缘检测方法、灰度插值方法和中心计算方法的实现,并将其用于闭环控制系统中,仿真实验表明,图像处理过程达到了不大于0 02像素的偏差,能够完成要求的定位精度(0 1像素)。
The principle of orientation technique based on image processing is discussed. A new edge detection method is proposed, and the practical implementation of edge detection, gray-level interpolation, and center calculation are introduced, which are applied in a closed loop control system. It has been verified by simulation that the aim for precise orientation can be implemented, and the maximum error is less than 002 pixel during the procedure of image processing.
引文
[1]张幼文.红外光学工程[M].上海:上海科学技术出版社,1982.
[2]GonzalezRC.WoodsRE.Woodsdigitalimageprocessingsecondedition[M].Beijing:PublishingHouseofElectronicsIndustry,2002.
[3]夏德深,傅德胜.现代图像处理技术及应用[M].南京:东南大学出版社,1997.
[4]孙星和.宇航遥感物理基础[M].北京:地震出版社,1990.
[5]数字图像处理学[M].北京:电子工业出版社,2001.
[6]傅德胜,寿益禾.图形图像处理学[M].南京:东南大学出版社,2002.
[7]崔屹.图像处理与分析[M].北京:科学出版社,2000.
[8]白庆本,韩照福.基于CCD成像和计算机图像处理技术的火炮内膛自动检测[J].北京:计算机测量与控制,2002,10(2):124-126.
[9]李红俊.韩冀皖数字图像处理技术及其应用[J].计算机测量与控制,2002,10(9):620-622.