1. [地质云]地热
底部传热引起的洱海热混合:基于观测和CE-QUAL-W2模型模拟的证据
详细信息   
  • 作者:Zhao Lei ; Cheng Sihang ; Sun Yanxin ; Zou Rui ; Ma Wenjing ; Zhou Qichao ; Liu Yong
  • 作者单位:Faculty of Geography, Yunnan Normal University, GIS Technology Engineering Research Centre for West-China Resources and Environment, Ministry Education, Yunnan Normal University, Kunming 650500, China;School of Information Science and Technology, Yunnan Normal University, China;College of Environmental Science and Engineering, State Environmental Protection Key Laboratory of All Materials Flux in Rivers, Peking University, Beijing 100871, China;Nanjing Innowater Environmental Technology Co., Ltd., Nanjing 210012, China;Institute for Ecological Research and Pollution Control of Plateau Lakes, School of Ecology and Environmental Sciences, Yunnan University, Kunming 650500, China
  • 关键词:Thermal mixing ; Lake Erhai ; CE-QUAL-W2 ; Geothermal heat
  • 来源文献:Journal of Hydrology
  • 年:2021
  • 发表时间:2021-10-27
  • 卷期:PB
摘要
The thermal structure of a lake is strongly associated its hydrodynamics and climatic conditions, and is an important basis to understand the physical, chemical, and ecological processes of the lake. Lake Erhai (100°05′–100°17′N and 25°36′–25°58′E) is a large and deep lake in Yunnan Province, located on the Yunnan–Guizhou Plateau of Southwest China. Some deep lakes located in areas adjacent to Lake Erhai with similar climatic conditions and water depths are warm monomictic lakes. However, the historical data of the surface water temperature and bottom water temperature for the past 15 years (2004–2018) showed small differences (<1 °C). However, ours and some other studies on the vertical water temperature profile showed mixing of the entire water column in different seasons. We have applied a well-established hydrodynamics model (CE-QUAL-W2) to explore the main process that induces the particular thermal structure of Lake Erhai. Model calibration was conducted twice, once with the extinction coefficient (Kd) and fraction of solar radiation absorbed in the surface layer (BETA) as the main calibrated parameters, and the other considering the process of bottom-water heat exchange, represented by the sediment temperature (TSED) parameter in the CE-QUAL-W2 model. The simulation results showed that the model can reproduce water level and surface water temperature accurately with the first calibration (TSED is 14.8 °C), however, only when the TSED is greater than 24 °C, the RMSE can be less than 2 °C. The model reproduces the bottom water temperature well when the TSED value was 29.6 ± 0.37 °C. Moreover, a series of scenarios were conducted to quantify the effect of wind speed and/or tributary inflows temperature on the thermal structure of Lake Erhai, and two stability indices (Schmidt stability, Birgean work) were calculated to quantify the energy required for stratification and mixing. These results demonstrated that the most likely process to establish the holomixis of Lake Erhai is geothermal heat transfer from sediment to water column, and an additional 12% heat flux from sediment plus the actual external energy supplies from sediment are required to mix the entire water column of Lake Erhai in summer.