摘要
The presence of geological units with different grade characteristics mostly leads to problems during the grade modeling process. In special cases, if the area under study has units with small thickness and low grade with respect to the dominant unit of the area, it is difficult to reproduce different grade contents in these units in the simulated grade models because of the low thickness and lack of data in these units. In this study, the local moment constraints method, based on the definition of soft conditioning data reflecting geological knowledge, is investigated for improving simulated grade models under the mentioned conditions. This method is applied for grade simulation at the 1,750?m level of Sungun porphyry copper mine. The studied area is divided into two rock type domains: Sungun porphyry and Dyke. The Sungun porphyry unit is the dominant rock type in the considered area and has, on average, a higher copper grade, while dykes discontinue Sungun porphyry rock units sporadically and most of them are barren of mineralization. It is demonstrated that the use of soft conditioning data makes the simulated grade model closer to reality and improves the reproduction of grade contents considering the rock type units in the area. In the next step, the results obtained from conditional simulation are used for mineral resources classification. To this end, the conditional coefficient of variation is chosen as a criterion for measuring uncertainty and for defining the resources classes. Then, it is shown that uncertainty can be considerably reduced in the prepared models if soft data are considered; as a result, an increase in measured resource classification is observed.