基于PC架构的动态红外目标图像智能生成研究
|
摘要
针对当前红外目标图像生成方法得到图像的信噪比低和分辨率低,为此,在PC架构的基础上设计了动态红外目标图像智能生成方法。采用热网络法对动态红外目标温度,将动态红外目标分成多个相同尺寸的面元,计算每个面元中的温度;对收集得到的红外辐射进行滤波处理,根据红外目标温度的分布情况将红外探测器测得的灰度值显示出来,生成动态红外目标图像。实验结果表明,本文方法生成的动态红外目标图像的信噪比高、分辨率高。
Aiming at the low signal to noise ratio and low resolution of the current infrared target image generation method,the intelligent generation method of dynamic infrared target image is designed on the basis of PC architecture.The dynamic infrared target temperature is applied to the dynamic infrared target temperature. The dynamic infrared target is divided into multi dimension surface element,and the temperature in each surface element is calculated. The infrared radiation collected is filtered. The gray value measured by the infrared detector is displayed according to the distribution of infrared target temperature,and the dynamic infrared is generated. Target image. The experimental results show that the SNR of the dynamic infrared target image generated by this method is high and the resolution is high.
Aiming at the low signal to noise ratio and low resolution of the current infrared target image generation method,the intelligent generation method of dynamic infrared target image is designed on the basis of PC architecture.The dynamic infrared target temperature is applied to the dynamic infrared target temperature. The dynamic infrared target is divided into multi dimension surface element,and the temperature in each surface element is calculated. The infrared radiation collected is filtered. The gray value measured by the infrared detector is displayed according to the distribution of infrared target temperature,and the dynamic infrared is generated. Target image. The experimental results show that the SNR of the dynamic infrared target image generated by this method is high and the resolution is high.
引文
[1]王新赛,周丰俊,郑磊,等.红外成像技术在城市地下空间防灾监测与应急搜救中的应用发展对策[J].中国工程科学,2017,19(6):92-99.
[2]唐璟,罗秀丽,刘绍华,等.石油和天然气红外成像检漏[J].激光与红外,2016,46(1):62-66.
[3]任国栋,张良,兰卫华,等.红外成像系统冷反射的定量分析[J].红外技术,2016,38(4):290-295.
[4]张腾飞,杨晶,侯岩雪,等.基于光参量变频与放大的高灵敏红外成像技术[J].物理学报,2016,65(1):154-159.
[5]魏丹丹,甘甫平,张振华,等.基于波谱模拟的红外成像仪信噪比指标设置研究[J].国土资源遥感,2016,28(4):18-23.
[6]张亚军,罗鑫.基于量子行为粒子优化的电路板红外成像增强[J].电子技术应用,2016,42(8):138-140.
[7]王霄,高思莉,李范鸣.深空双波段红外动态场景仿真与目标分析[J].激光与红外,2017,47(9):1123-1127.
[8]施蕊,徐畅,徐锐,等.基于MEMS的红外动态图像生成技术[J].红外与激光工程,2016,45(2):59-63.
[9]王彦,谢晓方,曹建,等.地面红外纹理的动态生成技术研究[J].弹箭与制导学报,2016,36(5):133-136.
[10]李晓,师艺杰,宋雁鹏,等.基于AOTF的近红外成像系统研究[J].压电与声光,2017,39(2):289-294.
[11]郑志忠,杨忠,修连存,等.一种Offner型小型短波红外成像光谱仪[J].光谱学与光谱分析,2017,37(7):2267-2272.
[12]田棋杰,常松涛,何锋赟,等.根据环境温度测量制冷型红外成像系统内部杂散辐射[J].光学学报,2017,37(7):144-151.
[13]李家琨,金伟其,王霞,等.气体泄漏红外成像检测系统的性能测试方法研究[J].北京理工大学学报,2016,36(6):630-634.
[14]徐强,潘丰,黄莉,等.激光干扰红外成像系统的噪声等效温差及信噪比分析[J].应用光学,2017,38(6):990-994.
[15]韩宇萌,贾晓洪,梁晓庚.红外成像导弹目标截获概率[J].航空学报,2016,37(10):3101-3109.
[16]方玲玲,赵婉彤,王相海.船舶红外成像目标跟踪研究进展[J].计算机辅助设计与图形学学报,2017,29(10):1776-1785.
[2]唐璟,罗秀丽,刘绍华,等.石油和天然气红外成像检漏[J].激光与红外,2016,46(1):62-66.
[3]任国栋,张良,兰卫华,等.红外成像系统冷反射的定量分析[J].红外技术,2016,38(4):290-295.
[4]张腾飞,杨晶,侯岩雪,等.基于光参量变频与放大的高灵敏红外成像技术[J].物理学报,2016,65(1):154-159.
[5]魏丹丹,甘甫平,张振华,等.基于波谱模拟的红外成像仪信噪比指标设置研究[J].国土资源遥感,2016,28(4):18-23.
[6]张亚军,罗鑫.基于量子行为粒子优化的电路板红外成像增强[J].电子技术应用,2016,42(8):138-140.
[7]王霄,高思莉,李范鸣.深空双波段红外动态场景仿真与目标分析[J].激光与红外,2017,47(9):1123-1127.
[8]施蕊,徐畅,徐锐,等.基于MEMS的红外动态图像生成技术[J].红外与激光工程,2016,45(2):59-63.
[9]王彦,谢晓方,曹建,等.地面红外纹理的动态生成技术研究[J].弹箭与制导学报,2016,36(5):133-136.
[10]李晓,师艺杰,宋雁鹏,等.基于AOTF的近红外成像系统研究[J].压电与声光,2017,39(2):289-294.
[11]郑志忠,杨忠,修连存,等.一种Offner型小型短波红外成像光谱仪[J].光谱学与光谱分析,2017,37(7):2267-2272.
[12]田棋杰,常松涛,何锋赟,等.根据环境温度测量制冷型红外成像系统内部杂散辐射[J].光学学报,2017,37(7):144-151.
[13]李家琨,金伟其,王霞,等.气体泄漏红外成像检测系统的性能测试方法研究[J].北京理工大学学报,2016,36(6):630-634.
[14]徐强,潘丰,黄莉,等.激光干扰红外成像系统的噪声等效温差及信噪比分析[J].应用光学,2017,38(6):990-994.
[15]韩宇萌,贾晓洪,梁晓庚.红外成像导弹目标截获概率[J].航空学报,2016,37(10):3101-3109.
[16]方玲玲,赵婉彤,王相海.船舶红外成像目标跟踪研究进展[J].计算机辅助设计与图形学学报,2017,29(10):1776-1785.