摘要
研究了反复镦拔工艺对Ni-20Cr-11Co-8Mo-4W合金组织和力学性能的影响。对Ni-20Cr-11Co-8Mo-4W合金反复镦拔前后的径向微观组织进行了金相、扫描电镜观察和分析,并对试验合金反复镦拔前后的室温冲击断口形貌进行了观察和分析。研究结果表明,反复镦拔工艺可以明显改善Ni-20Cr-11Co-8Mo-4W合金的微观组织,从而提高合金的力学性能。
Effects of repeated upsetting and drawing on microstructure and properties of Ni-20Cr-11Co-8Mo-4W alloy were investigated.Microstructure of the Ni-20Cr-11Co-8Mo-4W alloy in radial direction before and after repeated upsetting and drawing was observed and analyzed by metalloscope and SEM,and the room temperature impact fractures were also observed and analyzed by SEM. The results show that repeatedly upsetting and stretching can significantly improve the microstructure and mechanical properties of Ni-20Cr-11Co-8Mo-4W alloy.
引文
[1]董建新,李昂,张麦仓.GH586高温合金析出相的热力学模拟计算[J].材料工程,2003(9):7-10.Dong Jianxin,Li Ang,Zhang Maicang.Thermodynamic simulation of precipitions in GH586 superalloy[J].Materials Engineering,2003(9):7-10.
[2]崔彤,王磊,吕俊英,等.GH586合金高温下低周疲劳断裂行为[J].钢铁研究学报,2003,15(2):48-51.Cui Tong,Wang Lei,LüJunying,et al.Investigation on high temperature low cycle fatigue fracture behavior of superalloy GH586[J].Journal of Iron and Steel Research,2003,15(2):48-51.
[3]焦兰英,黄进峰,赵光普.GH586合金的高温低周疲劳特征[J].钢铁研究学报,2003,15(7):21-23.Jiao Lanying,Huang Jinfeng,Zhao Guangpu.Investigation on high temperature low cycle fatigue behaviour of superalloy GH586[J].Journal of Iron and Steel Research,2003,15(7):21-23.
[4]俞肇元,鄂晓宇,吕俊英,等.GH586合金热处理后的组织对短时持久强度的影响[J].金属热处理,2003,28(12):26-28.Yu Zhaoyuan,E Xiaoyu,LüJunying,et al.Effects of microstructures of GH586 alloys on short-term creep rupture strength after heat treatment[J].Heat Treatment of Metals,2003,28(12):26-28.
[5]黄进峰,余红燕,李永兵,等.富氧气氛下高温合金氧化特征及机理[J].钢铁研究学报,2009,21(3):51-54.Huang Jinfeng,Yu Hongyan,Li Yongbing,et al.Oxidation characteristic and mechanism of superalloys in oxygen-enriched[J].Journal of Iron and Steel Research,2009,21(3):51-54.
[6]余永宁.金属学原理[M].北京:冶金工业出版社,2011.