摘要
根据车辆的制造工艺和质量要求,介绍了造型设计阶段的预设制造模型,并将制造模型应用到VR场景(通过渲染软件进行场景模拟、光源模拟和汽车油漆着色)中进行外观DTS感知质量评价。经过多款车型感知评价的数据积累,总结出一套外观DTS评价的流程及方法。
According to the manufacturing process and quality requirements of the vehicle, this paper introduces the preset manufacturing model in the modeling design stage, and applies the manufacturing model to vr scene(Scene simulation, light source simulation and automobile paint coloring were carried out by rendering software) for the appearance DTS perceived quality evaluation. Through the accumulation of perception evaluation data of multiple vehicle models, this paper summarizes a set of workflow and methods of appearance DTS evaluation.
引文
[1]胡雪芬.汽车感知质量及数学模型解析[J].汽车工程师,2013(4):44-46.
[2]杨宇光.汽车外观静态感知质量控制方法[J].轻型汽车技术,2007(2):25-29.
[3]崔庆泉.汽车尺寸感知质量评价的研究与应用[J].汽车工程师,2014(3):13-15.
[4]刘杨.基于3DCS的车身前部偏差仿真分析[J].汽车工艺与材料,2015(8):65-68.
[5]黄太强. Vred渲染技术在汽车设计中的应用[J].时代汽车,2018(2):56-59.
[6]杨月英.基于灰色时间序列预测中国汽车销量[J].湖州职业技术学院学报,2012(1):35-7.
[7]张丹.浅析结合J.D.POWER调查管理汽车感知质量[J].上海汽车,2013(9):38-40.
[8]张洪亮.精益生产的眼神——精益设计[J].科技管理研究,2010(2):113-115.