1. [地质云]滑坡
轮式移动机器人控制系统设计与研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
本文从轮式移动机器人(WMR)的体系结构出发,重点设计了机器人移动控制系统的硬件、软件平台。首先,通过对非完整轮式移动结构和直流伺服电机模型的分析,建立了移动机器人的控制系统模型。其次,设计了基于AVR微控制器(AT90S8515)的移动控制系统,其中主要包括PWM功率驱动、测速单元和串行通讯模块等:对机器人速度、位置控制采用模糊PID算法,较好地克服了移动机器人模型的不确定性、转速位置控制要求的多变和环境改变等因素的影响。程序使用ICCAVRC语言编写,在AVR SUDIO调试软件中用ICE200仿真,并最终实现。仿真结果和机器人实际运行验证了设计效果良好。本文最后,还对移动机器人路径规划进行了研究,使用启发式搜索算法在给出的地图信息空间中寻找理想的路径。
In view of the Architecture of Wheeled Mobile Robot, this paper emphasizes on the design of hardware and software platform based on control system. Firstly, A whole control model is given after analyzing the wheeled structure with nonholonomic constraints and the model of DC servo-motor building. Secondly, We develop a motion control system using AT90S8515 microcontroller. A closed Pulse Width Modulation(PWM) regulating speed system for DC servo-motor is presented, it is composed of AVR microcontroller, PWM power driver, unit of speed detection using encoder and a serial communication interface, etc. Fuzzy PID algorithm is employed to control the speed and position of WMR. The method can solve effectively some problems such as the uncertainty of WMR's model, the varieties demand, the change of situation. Program is wrote in ICCAVR C language and debugged in AVR Studio with ICE200 simulator. The control system of wheeled mobile robot has good performance. Simulated result and practical performance both approv
    e the validity of design. At last, we study on robot path planning for an approach to find out a perfect path in a certain map using a heuristic search algorithm.
引文
[1]Darrick Addison. Introduction to robotics technology. USA, September 2001
    [2](美)付京孙等著.机器人学:控制、传感技术、视觉、智能.北京:中国科学技术出版社,1989.10
    [3]J. Borenstein, H.R. Everett, and L. feng. Sensors and Methods for Mobile Robot Positioning. April, 1996
    [4]谢涛.仿人机器人的研究历史、现状及展望.机器人ROBOT,Vol24,4,2002
    [5]蔡自兴.机器人学.北京:清华大学出版社,2000年9月
    [6]孙迪生,王炎编著.机器人控制技术.北京:机械工业出版社,1997
    [7]大熊繁[日]编著.机器人控制.北京:(译)科学出版社,2002
    [8]Inncapolis, Minnesota, Yamauchi B. Mobile Robot Localization in Dynamic Environments Using Dead Reckoning and Evidence Grids. Proc. of the IEEE Inter. Conf. On Robotics and Automation. M USA, 1996
    [9]廉师友编著.人工智能技术导论.西安:西安电子科技大学出版社,2001.1
    [10]朱长宏.轮式可移动机器人的研究.南京:南京航空航天大学硕士学位论文,2000.2
    [11](美)理查德-摩雷,(中)李泽湘等著.机器人操作的数学导论.北京:机械工业出版社,1998.6
    [12]胡寿松主编.自动控制原理(4版).北京:科学出版社,2001.2
    [13]池瑞楠.非完整两轮驱动移动机器人的实验研究.机器人技术与应用,2001年第1期
    [14]付庄.轮式移动机器人WMR的运动分析.机器人ROBOT,Vol 23,7,2001
    [15]G. Campion. Structual Properties and Classification of Kinematic and Dynamic Models of Wheel Mobile Robots. IEEE Trasactions on Robot and Automation, Vol. 12, No.1, 1996
    [16](日)白井良明编著.机器人工程.科学出版社,2001
    [17]秦继荣,沈安俊编著.现代直流伺服控制技术及其系统设计.北京:机械工业出版社,1993
    [18]赵继文主编.传感器与应用电路设计.北京:科学出版社,2002.9
    [19]金钰.伺服系统设计指导.北京:北京理工大学出版社,2000.2
    [20]何立民主编.单片机应用技术选编.北京:北京航空航天大学出版社,2000.8
    [21]耿德根,宋建国,马潮.AVR高速嵌入式单片机原理与应用.北京:北京航空航天大学出版社,2001
    [22]丁化成,耿德根,李君凯编著.AVR单片机应用设计.北京航空航天大学出版社 2002.5
    [23]沈文,Eagle lee编著.AVR单片机C语言开发入门指导.2003.5
    [24]杨志亮主编.Protel 99SE电路原理设计技术.西安:西北工业大学出版社,2002.2
    [25]朱丹梧.增量式光电编码器信号处理、显示电路的设计.实用检测技术,1997第4期
    [26]刘新建.光电编码器的误计数抑制电路设计.国防科大自控系机器人实验室,测控制技
    
    术,1998年第17卷第6期
    [27]逢海萍.IR2111和IR2130在PWM直流伺服系统中的应用.电气传动自动化,2001,3
    [28]陈国呈编著.PWM变频调速及开关电力变换技术.北京:机械工业出版社,2002.1
    [29]精英科技编著.电路板设计完全手册.北京:中国电力出版社,2002.1
    [30]岳东.不确定动态系统的鲁棒控制理论.中国矿业大学出版社,1998.11
    [31]Lin Ke Wang. Theory and Experimental Investigation of Tracking Control of Wheeled Mobile Robots. Thesis for the degree of master at Concordia University, Canada. 2002.3
    [32]L. Feng etc. A model-reference adaptive motion controller for a differential-drive mobile robot. IEEE conference, 1994
    [33]Patrick F. Muir and Charles P. Neuman. Kinematic modeling of wheeled mobile robots. Journal of Robotic Systems, Vol. 4, No. 2, April, 1987, pp. 281-340.
    [34](英)哈里斯(Harris,C.J.),(英)比林斯(Billings,S.A.)著.自校正和自适应控制.北京:科学出版社,1986
    [35]高金源等编著.计算机控制系统—理论、设计与实现.北京航空航天大学出版社,2001.2
    [36]高东杰,谭杰编著.应用先进控制技术.北京:国防工业出版社,2003年
    [37]李士勇编著.模糊控制·神经网络和智能控制论.哈尔滨:哈尔滨工业大学出版社,1998.9
    [38]刘金琨著.先进PID控制及其MATLAB仿真.电子工业出版社,2003.1
    [39]ChengYu Lee. Real-time Target Tracking in an Indoor Environment. A Dissertation for the degree of Ph.D, STANFORD UNIVERSITY, June, 2002
    [40]余永权,曾碧编著.单片机模糊逻辑控制.北京:北京航空航天大学出版社,1995.7
    [41]李贻斌.不确定环境下移动机器人的运动控制.The 19th chinese conference 2000.720—723
    [42]TIM OATES. Grounding Knowledge in Sensors Unsupervised Learning for Language and Planning. The dissertion for the degree of Ph.D, September, 2001
    [43]肖位枢主编.图论及其算法.航空工业出版社,1993
    [44]唐平.基于space-time的二叉树表示动态环境中的路径规划.计算机工程,2002.5
    [45]郭丙华,胡跃明.考虑障碍约束的非完整运动规划.机器人技术与应用,2002年第4期
    [46]贾艳华.非完整轮式移动机器人路径规划研究.北京:北京理工博士论文,2002年10月
    [47]张纯刚,席裕庚.动态未知环境中移动机器人的滚动路径规划及安全性分析.控制理论与应用.Vol.20,No.1,Feb.2003
    [48]Maritza Bracho de Rodriguez and Jose Ali Moreno. Heuristic Algorithm for Robot Path Planning Based on Real Space Renormalization, IBERAMIA-SBIA 2000, LNAI 1952, pp. 379~398, 2000.
    [49]孟传伟,蒋平.一种考虑控制精度的机器人最优轨迹规划方案.机器人ROBOT,vol.22,No.3,2000.5
    [50]许海燕,付炎主编.嵌入式系统技术与应用.北京:机械工业出版社,2002.4
    [51]朱福喜,汤怡群 等编著.人工智能原理.武汉:武汉大学出版社,2002.2
    [52]Nillson NJ. Principles of Artificial Intelligence. Palo Alto, CA: Tioga Publishing Co, 1980.