摘要
引文
1．张大卫，田延岭，王杏华等 超精密磨削辅助工作台及结构静动态特性研究，天津大学学报，第35卷 第4期 2002.7
2．张大卫，冯志勇等，A Mechanistic Cutting Force Modal of Taper End-mills，CIRP’97 全球先进制造技术发展战略研讨会论文集，1997，香港
3．黄长征，王建萍等，影响超精密加工精度的主要因素，韶关大学学报， 2000, 79-84
4．王霖，秦勇，磨削温度场的研究现状与发展趋势，工具技术，2002,36(6).-7-10
5．兰雄候，王继先，磨削温度理论研究的现状与进展，金刚石与磨料磨具工程，2002,36(6).-7-10
6．贝季瑶，磨削温度的分析和研究，上海交通大学学报，1964，No.33
7．徐鸿钧，磨削温度的测量技术，磨料磨具与磨削，1986，6（36）
8．傅秦生等，热工基础与应用，机械工业出版社，2002
9．候镇冰等，固体热传导，上海科学技术出版社，1984
10．梁允奇，机械制造中的传热和热变形基础，北京：北京机械工业出版社，1982
11． 孔详谦等，有限元法在传数学中的应用，北京：北京科学出版社，1981
12．俞吕铭，热传导及其数值分析，北京：清华大学出版社，1982
13．朱世和，有限元法在机床热特性分析中的应用，天津理工学院学报，1986(2)
14．孙振均，金属切削机床构造与设计，北京：国防工业出版社，1984
15．陆煜等，传热原理与分析，科学出版社 ，1997
16．张洪亮，杯形砂轮平面磨削温度场的解析及计算机仿真，天津大学硕士论文，2001
17．田延岭，微进给平台的设计及实验研究，天津大学硕士论文，2002
18．张建刚 ，杯形砂轮平面磨削的数值解析和实验研究，天津大学硕士论文，2002
19．杨圣等，Queensgate纳米工作台的关键技术，机械设计与制造工程，2002
20．关耀奇，精密加工种加工稳定性的研究，噪声与振动控制，2000
21．李玉平，磨削工件受热变形及其误差的计算，现代机械，2001
22．李良福，平面磨削薄壁工件时的热过程，磨床与磨削，2000
23．王威廉，温度场计算中的几个问题，航空工艺术，1991
24．曾伟民，大切深磨削温度场的理论分析，金刚石与磨料磨具工程，2002
25．杨庆东，机床动态热性能研究和误差补偿，重庆工业高等专科学校学报，1999
26．胡鹏浩，减小机床热变形的有效途径，机械工业自动化，1999
27．范敏霞， 用有限元法进行低温磨削钛合金温度场的研究，金刚石与磨料磨具工程，2002
28．戴一帆，李圣怡，超精密加工精度分析，中国机械工程 ，1999，2
29．高航，断续磨削温度场的计算机模拟，东北大学学报，2002
30．高航，断续磨削温度场的研究，机械工程学报，1989
31．曾忠，磨削过程中的热现象研究，华东工业大学学报，1995
32．王霖等，磨削温度场的研究现状与发展趋势，山东大学 2002
33．王先逵等，精密加工技术使用手册，机械工程出版社，2001
34．武志斌，高效磨削时磨削热问题的研究，农业机械学报，2001
35．邓朝晖等，纳米结构陶瓷涂层材料精密磨削的试验研究，湖南大学学报，2003
36．唐开永，机床导轨热变形及热应力计算，机床与液压，2002
37．关耀奇，热变形对精密加工的影响控制，机械研究与应用，2001
38．芮小健，张幼桢，颜景平等，精密可控微位移器实验研究，航空精密制造技术， No.1, 1994
39．王先逵等，精密加工和超精密加工技术综述，中国机械工程，1999
40．许茂桃，超精密加工技术的发展与其对策，制造技术与机床，Vol.1, 2001, 7-9
41．许尚贤，机械设计中的有限元法, 高等教育出版社，1988
42．贾非等，压电陶瓷, 科学技术出版社，1979
43．吴永孝，超精密切削加工技术，哈尔滨工业大学 1983
44．李福生，数控机床技术手册，北京出版社，1996
45．Y. Sh. Gao, D.W. Zhang and Ch. W. Yu, Dynamic modeling of a novel workpiece table for active surface grinding control, Int. J. of Mach. Tools Manufact., Vol.41, 2001, pp609~624.
46．J. Otsuka and S. Koshimizu et al, An ultra-fine motion using piezoeletric actuator for utra-precision grinding, Int. J. of Japan Soc. Prec. Engg., Vol. 30(4), 1996, pp.345 ~346.
47．Z. Zhong, T. Nakagawa, Development of a micro displacement table for ultra-precision machining and grinding for curved surfaces by the use of it, Int. J.of Japan Soc. Prec. Eng., Vol. 6(2), 1992, pp.102~107.
48．J. D. Kim and S. R. Nam, Development of a micro- positioning grinding table using piezoelectric voltage feedback, Proc. of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. Vol. 209 (B6), 1995, pp 469-474.
49．Y. Gao, D. W. Zhang, Ch. W. Yu et al, Detachment modeling of a novel workpiece micro-positioning table under preload hertz contact, Prec. Eng., Vol.26(1), 2002, pp.83-92.
50．W. H. Zhu, M. B. Jun and Y. Altintas, A fast tool servo design for precision turning of shafts on conventional CNC lathes, Int. J. Mach. Tools Manufact., Vol.41(7), 2001, pp.953-965.
51．Y.L. Tian, D.W. Zhang, Desigen of a nanometer micro- positioning workpiece table based on finite element method. Proceeding of the second international conference on precision engineering and nanotechnology, 2002, pp54-59
52．Aherton ,Nanometr eprecision mechanisms Measurement contorl ,1998
53.Lin bin etc ,Finite element analysis of surface grinding temperature field by cup wheel ,ICPN 2002
54.J.X.Ren etc,The priciple of grinding Northwestern Polytechnic University Press ,China 1988
55.Hou ,Z B etc, Heat Conduction of Solid ,Shanghai Science and Technology Press 1984
56.Lin b etc ,Theoretical analysis of temperature field insurface grinding with cup wheel,Key Engineering Materials,2001
57.C.Jerger ,Moving Source of Heat and the Temperature at Sliding Contacts,.Proc.Roy.Soc of New South Wales ,1942
58.Inasaki,Grinding of hard and brittle materials ,Annals of CIRP ,1987
59.Kong,X.Q,The application of finite element method in heat transfer,Science press Beijing
60.Takeo Ozawa ，Thermal analysis-review and prospect ，Thermochimica acta 1999
61.Kevin ,T.Andrews etc A model for heat transfer in grinding ,Nonlinear Analysis ,1997
62.Y.S.Liao etc ,A thermal model for the wet grinding process ,Material Processing Technology
,1998
63..N.Moulik ,Simulation of thermal stresses due to grinding,Mechanical Sciences ,2000
64.Tan Jin ,Temperatures in deep grinding of finite workpieces ,Machine Tools &Manufacture ,2001
65.H.H.Tsai etc, Investigation of the transient thermal deflection and stress of the workpiece in surface grinding with the application of a cryogenic magnetic chuck ,Materials Processing Technonlgy ,1997
66.H.H.Tsai etc,Prediction of a thermal induced concave ground surface of the workpiece in s urface grinding,Materials Processing Technonlgy ,2000
67.M.Mahdi,The finite element thermal analysis of grinding processes by Adina ,computers&structures ,1995
68.J. W. Ryu,,D. G. Gweon,Error Analysis of A Flexure Hinge Mechanism Induced By Machining Imperfection,Precision Engineering,,Vol.21 No.2, 1997, 83~8969Otsuka,,S.Koshimizu etc,An
69.Ultra-fine Motion Using Piezoelectric Actuator for Ultra-precision Grinding, Int. J. Japan Soc. Prec. Engg, 1996
70.K.V Frolov, Vibration technology: theory and practice , Mir Publishers ; Boca Raton : CRC Press, 1991
71.H.Yonezawa etc., Positioning Table with High Accuracy and High Speed, Annals of The CIRP, 1990
72.Jiro. Ostuka etc., An Ultrafine Motion Table Using Piezoelectric Actuator For Ultraprecision Grinding, JSPE, 1996
73.H. S. Tzou, Desigh of A Piezoelectric Exciter/Actuator For Micro-Displacement Control: Theory And Experiment, Precision Engineering, 1991,
74.J-D Kim, S-R Nam, A Piezoelectrically Driven Micro-positioning System for the Ductile-mode Grinding of Brittle Materials, Journal of Materials Processing Technology, 1996
75.D Kim, S-R Nam, An Improvement of Positioning Accuracy by Use of Piezoelectric Voltage in
Piezoelectric Driven Micropositioning System Simulation, Mech. Mach. Theory ,1995,
76.T.Nishihara etc, Study on the geometrical accuracy in surface grinding-process of form
theworkpeice shape in plunge grinding JSPE ,1991
77.H.H.Tsai etc,Monitoring of creep-in depth beyond the intial wheel/workpiece contact in surface grinding by acoustic emission ,J.Mach.Sci.Technol ,1997
78.Y .Nakano etc,Analysis of strady-state thermal deformation of workpiece during surface grinding operation ,JSPE 1975
79.Y .Nakano etc,Thermal deformations of workpieces during surface grinding and profile errors of finished workpiece ,JSPE 1973