电子束蒸发制备TiO_2薄膜及光学性能的研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
TiO_2具有高折射率,在可见光波段透明以及良好的化学稳定性,是非常重要的光学薄膜材料,近年来得到了非常广泛的应用。研究TiO_2薄膜的制备具有较大的科学和应用价值。
     本文用电子束反应蒸发法在K9玻璃上制备了TiO_2薄膜。用正交试验法研究了制备过程中的主要工艺因素基片温度、沉积速率、真空度对薄膜的主要光学常数折射率以及消光系数产生的影响。薄膜的折射率和消光系数用椭圆偏振仪测量并计算得到,用分光光度计测量了膜的透射率光谱曲线,薄膜的微观形貌和结构由扫描电镜以及X射线衍射仪进行了分析。通过极差法确定了在电子束反应蒸发的制备条件下得到最佳光学性能的TiO_2薄膜的工艺条件为:基片温度300℃、真空度2×10~(-2)Pa、沉积速率0.2nm/s,得出了基片温度对TiO_2薄膜光学性能影响最大的结论。用最佳工艺条件制备的薄膜在可见光波段的范围内有很好的透光性,在扫描电镜下观察到薄膜的结构为柱状纤维结构。
     本文研究了退火工艺对不同基片温度下制备薄膜的结构以及光学常数的影响。对退火前后的薄膜进行了X射线衍射分析、透射光谱分析,表明退火可以使非晶态结构的TiO_2薄膜晶化并可以使折射率以及吸收情况得到较大的改善,确定了使薄膜的组织结构全部为锐钛矿结构的退火工艺。完成了用电子束反应蒸发法得到优良光学性能以及结构的TiO_2薄膜的工艺研究。
     为了利用TiO_2进一步设计和制备光学膜堆,笔者利用Visual Basic开发了一套膜系设计软件,该软件可完成膜系光学图谱计算,用包络线法进行光学常数分析,以及用单纯形调优法进行膜系优化设计。本文详细介绍了软件各个模块的工作原理,程序框图,以及计算分析结果。最后利用本软件优化设计出了一个TiO_2-MgF_2增透膜的膜系,理论透射率在400~700nm波长范围内可以达到99%以上,并进行了试制,样品实际透过率在97%以上,起到了光学增透的作用。
TiO2 has high refractive index, be transparent in the wave band of visible and has excellent chemical stability. It is one of the most important coating materials and was
    used widely in recent years. So there are large Science and Application values to study the preparation of TiOz thin films.
    TiOi film is deposited by reactive electronic beam evaporation on the K9 substrates. Through the orthogonal experiment the Influence of technological conditions (temperature of substrate, deposition rate, chamber vacuum) to optical property of TiC>2 film was studied. The refractive indices and the extinction
    coefficient of the films have been measured by spectroscopic ellipsometry. Optical properties and structure features have been characterized respectively by UV-VIS spectrophotometer, SEM and XRD. The temperature of substrate has the most important influence on the optical properties. The optimum technique for best optical properties is that the substrate temperature is 300 癈 ,the chamber vacuum is 2xlO~2 Pa, the deposition rate is 0.2 nm/s. The thin films deposited by the optimum
    technique show excellent transmittance properties in visible region. The SEM observation shows that the TiQi films deposited by EB on K9 substrates have
    columnar fibrous.
    The influence of anneal to film's structure was also studied. The specimens
    deposited under different temperature are annealed and the structure and optical properties are analyzed. The results indicate that the anneal can make the amorphous film structure crystallized and make the refractive indices higher, the absorption conditions are also improved. Then we got the process how to get high optical
    properties TiOi films deposited by EB on K9 glass.
    In order to design and deposit the multi-layer optical thin films with TiOi as the coating material. The author develop a film system design software by visual basic which can optimize thin film system by simplex method, calculate the optical performance, analysis the transmission spectrum and calculate the refractive index and extinction coefficient and thickness through the envelope method. The work principle, the program and the result are described. The author designs a
    
    
    TiO2-MgF2 anti-reflectance multi-layer film. The theory optical transmittance can be over 99% between the 400nm and 700nm.The specimen was trial-produced and the optical transmittance can be over 97%.
引文
[1]H·A·麦克劳德.光学薄膜技术.国防工业出版社,1974
    [2]林永昌,卢维强.光学薄膜原理.国防工业出版社,1990
    [3]王学华,薛亦渝,赵利,张幼陵.新型光学薄膜研究及发展现状.武汉理工大学学报,2002,(24):220~23
    [4]王力衡,黄运添.薄膜技术.清华大学出版社,1991
    [5]宋继鑫.国外光学薄膜的应用和真空镀膜技术.光学技术,1994(1):32~39
    [6]Hu Xingfang, QinShuyin. Selectively absorbing black aluminum coating deposited by vacuum evaporation. Solar Energy Material, 17(1998):207~215
    [7]Haruo Takashashi. Teperature stability of thin film Narrow_bandpass filters produced by Ion-assisted deposition.Applied Optics, 34(1995):667-675
    [8]吕俊霞,马月英.软X射线多层膜的应用及发展.物理,1998,27(6):358~360
    [9]黄心耕,刘江.从欧洲真空镀膜会议分析光学薄膜及其技术发展.光学仪器,21(5):238~242
    [10]石玉龙,谢广文.TiO_2薄膜用途及其制备方法.电机电器技术,2000,(3):37~42
    [11]陈文梅,杨尊先.工艺参数对TiO_2薄膜性能的影响。玻璃与陶瓷,2001,29(4):18~21
    [12]孟宪权,王君.TiO_2薄膜的制备及结构研究.半导体学报,2000,20(3):395~397
    [13]武正黄,吴争鸣.TiO_2薄膜的结构研究.真空与低温,2001,7(2):81~84
    [14]包定华,顾豪爽.TiO_2薄膜的sol-gel制备和结构分析.功能材料,1995,26(4):528~632
    [15]赵坤,朱凤,王莉芳.反应溅射法制备TiO_2薄膜.物理学报。2001,50(7):1390~1395
    [16]王维波,李学萍.TiO_2多孔薄膜电极的制备、微结构及光电化学性能研究.感光科学与光化学,1999,15(2):161~163
    [17]张东社.TiO_2纳晶多孔薄膜电极微结构及性能的光电化学研究:[博士学位论文].中国科学院
    [18]L.kavan. Mesoporous thin films TiO_2 electrodes. Microporous and Mesoporous material, 44~45(2000) 653~659
    [19]杨秋红,顾莹.TiO_2电致变色膜的制备与性能研究.硅酸盐通报,
    
    1997(增刊):89~91
    [20] 姚红军,汪荣昌,戎瑞芬.TiO_2薄膜氧敏特性研究.半导体技术,1997,(1):50~53
    [21] H. Tang, IS. Prasad. TiO_2 anatase thin films as gas sensors. Sensors and Actuators, 26-27 (1995): 71-75
    [22] L.L.W.chow. Reactive sputtered TiO_2 thin film humidity sensor with negative substrate bias. Sensors and actuators, 176(2001):310~315
    [23] Yasushi Yamada), Yoshiki Seno. NO_2 sensing characteristics of Nb doped TiO_2 thin films and their electronic propertie. Sensors and Actuators, 66(2000): 164-166
    [24] 王学华,薛亦渝,赵利,张幼陵.电子束蒸发法制备TiO_2薄膜结构及光学性能研究。武汉理工大学学报·信息与管理工程版,2002,24(11):11~14
    [25] 杨烈宇,关文铎.材料表面薄膜技术.人民交通出版社,1991
    [26] 顾培夫.薄膜技术.浙江大学出版社,1990
    [27] 田民波,刘德令.薄膜科学与技术手册.机械工业出版社,1991
    [28] 陈国平.薄膜物理与技术.东南大学出版社,1993
    [29] 薛增泉,吴全德,李洁.薄膜物理.电子工业出版社,1989
    [30] 李学丹,万英超,姜祥祺.真空沉积技术.浙江大学出版社,1994
    [31] Diana Mardare. Optical dispersion analysis of TiO_2 thin films based on variable-angle spectroscopic ellipsometry measurements. Materials Science and Engineering, 68(1999):42-47
    [32] 马颖.二氧化钛光催化薄膜的制备及性能研究:[博士学位论文].中国科学院.
    [33] Y. Leprince-Wang. Correlation between microstructure and the optical properties of TiO_2 thin films prepared on different substrates. Thin Solid Films 307(1997):38-42.
    [34] N. Martin. Energy distribution of ions bombarding TiO_2 thin films during sputter deposition. Surface and Coatings Technology, 138(2001): 77~83
    [35] N. Martin. Characterizations of titanium oxide films prepared by radio frequency. Thin Solid Films, 287(1996):154~163
    [36] Koumei. Baba. Synthesis and properties of TiO_2 thin films by plasma source ion implantation. Surface and Coatings Technology, 136(2001): 241~243
    [37] Yasumi Yamada. Low-temperature deposition of optical films by oxygen radical beam-assisted evaporation[J]. Thin Solid Films, 377-378(2000):92-96.
    [38] Jiaguo Yu,Xiujian Zhao. Effect of surface structure on photocatalytic activity of TiO_2 thin films prepared by sol-gel method. Thin Solid Films, 379(2000):7~14
    [39] Wei-Xing Xu, Shu Zhu, XPS study of TiOx thin films deposited on glass substrates by the sol-gel process. Applied Surface Science, 136(1998):194~205
    
    
    [40] Zhongchun Wang. Optical properties of anatase TiO_2 thin films prepared by aqueous sol--gel process at low temperature. Thin Solid Films, 405(2002):50-54
    [41] Mona P. Moret. Brookite-rich titania films made by pulsed laser deposition. Thin Solid Films, 366(2000):8~10
    [42] 武正黄,刘正苓.低压化学气相沉积法制备TiO_2膜的研究.化学研究与应用,1999,11(1):13~17
    [43] Shigeyuki Watanabe. Synthesis of TiO_2 thin films by metalorganic pulsed molecular beam deposition with an oxygen-radical beam source. Applied Surface Science 130-132(1998): 822-827
    [44] C.Martinet. Deposition of SiO_2 and TiO_2 thin films by plasma enhanced chemical vapor deposition for antireflection coatin. Journal of Non-crystalline solids, 216(1977): 77~82
    [45] E. Halary. Crystallinity of titania thin films deposited by light induced chemical vapor deposition. Applied Surface Science, 168(2000): 61~65
    [46] 《正交试验法》编写组 正交试验法.国防工业出版社,1976.
    [47] 包学诚.椭偏仪的结构原理与发展.现代科学仪器 1999(3):58~61
    [48] 陈蓝,周岩.膜厚度测量的椭偏仪法原理分析.大学物理实验,12(3):10~14
    [49] Faculty of Physics. On the optical constants of TiO_2 thin films Ellipsometric studies. Materials Research Bulletin, 35(2000) 2017-2025
    [50] 王艳辉,段家氏.薄膜材料光学参量的测量.物理实验,2000,20(10):13~16
    [51] 王洪涛.椭圆偏振法测量薄膜参量的数据处理.物理实验,2000,21(7)8~12
    [52] 黄代勇,龚跃球,刘保顺.热处理温度对TiO_2薄膜性能的影响.武汉理工大学学报,2002,24(6):1~3
    [53] M. Lemiti. Rapid thermal annealing applied to the optimization of titanium oxide arc. Materials Science in Semiconductor Processing, (1998): 331~334
    [54] G.S. Herman. X-ray photoelectron diffraction study of an anatase thin film: TiO 2 (001). Surface Science, 447(2000): 201-211
    [55] D. Mergel. Modeling thin TiO_2 films of various densities as an effective optical medium. Thin Solid Films, 397(2001):216~222
    [56] 武正黄,刘正苓.影响TiO_2薄膜表面形貌的因素.真空与低温,2001,7(4):211~213
    [57] 唐晋发,郑权.应用薄膜光学.上海科学技术出版社,1984
    [58] 尹树百.薄膜光学——理论与实践.科学出版社,1987
    
    
    [59]南京大学数学系计算数学专业.光学自动设计程序汇编.国防工业出版社,1978
    [60]唐沪军,沈杰.介质薄膜的透射光谱测量及其光学参数的分析[J].真空科学与技术,1997,17(6):417-428
    [61]王德育,袁春伟.TiO_2薄膜厚度及其光学常数的测量.东南大学学报,29(5):105~110
    [62]刘梦夏,强西林.光学薄膜膜系设计方法及发展趋势.西安工业学院学报,2000,20(3):194~199
    [63]赵利,薛亦渝,王学华,张幼陵.膜系自动设计中的几种新型评价函数.武汉理工大学学报·信息与管理工程版,2002,24(5):125~127
    [64]孔明东,李瑞洁.光学平板偏振分光镜对称膜系的优化设计.强激光与粒子束,2000,12(1):61~63.
    [65]万刚,叶得军.硅太阳能电池减反射膜的优化设计.上海交通大学学报,1998,32(12):21~23.
    [66]孔明东,李瑞洁.高反射率光学薄膜的一种新设计方法.光电子·激光,2000,11(1):62~64.
    [67]王学华,薛亦渝,赵利,张幼陵.单纯形优化算法在膜系自动设计中的应用.武汉理工大学学报·信息与管理工程版,2002,24(5):134~137