并流沉淀法制备纳米氧化锌的工艺研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
纳米氧化锌与普通氧化锌相比,显示出诸多特殊性能(如压电性、荧光性、无毒和非迁移性、吸收和散射紫外线能力等)和用途(如用于压敏电阻、压电材料、气体传感器、图象记录材料、磁性材料、紫外线屏蔽材料、高效催化剂和光催化剂等)。因此对纳米氧化锌制备的理论研究和应用研究相对较多。
     本课题以工业废渣锌浮渣为原料就纳米氧化锌的制备做了深入研究。对比直接沉淀法、均匀沉淀法、并流沉淀法纳米氧化锌,确定工艺流程,然后通过一系列实验对起始硫酸锌溶液浓度、PH值、表面活性剂种类、表面活性剂添加方式、表面活性剂加入量、底液浓度、并流滴加速度、反应温度、反应时间、沉淀剂种类、洗涤方式、干燥温度、煅烧温度等影响因素进行优化选择,寻找出并流沉淀法制备纳米氧化锌的最佳工艺条件,在此基础上采用了超声波技术、微波技术和添加表面活性剂进行表面包覆技术,制备了高分散、低团聚、高活性、单分散的纳米氧化锌。并对制得的纳米氧化锌用X-射线衍射仪测试物相结构分析;扫描电子显微镜(SEM)测出颗粒的形貌和尺寸;透射电子显微镜(TEM)测出颗粒的形貌和尺寸;差热分析前驱体晶型的转变温度;红外光谱谱图测定粒子的表面有机物包覆;EDTA滴定法测定氧化锌的含量;粒度分析仪分析粒度的分布范围等进行表征。
     纳米氧化锌制备的研究不仅为锌冶炼厂开发新的高档次产品,成为新的经济增长点之一,而且为充分利用二次资源(工业废渣锌浮渣)寻求了新的开路,对企业实现可持续发展,达到节能降耗具有积极的促进作用,特别是充分利用锌资源,提高综合利用的水平,保护环境等方面,具有较高的战略意义
Compared with nanometer ZnO and commom ZnO, nanometer ZnO has more special capability ,such as piezoelectricity, fluorescence, no-transplant, and the capability of absorb and scatter ultraviolet radiation, nanometer ZnO is used to the material that piezoelectricity resistance, piezoelectricity material, gas sensor, recording image material, catalyzer etc. Therefore , more studies are focused on the theory analysis and application of the nanometer ZnO.
    We had gone deep into study and successly prepared nanometer-size ZnO based on paralled flow precipitation method with Zincdross. We analysis and compare the abuse of some kinds of liquid phase method of producing nanometer-size ZnO and then make certain the craftwork. We confirm the furthest condition on the base of paralled flow precipitation method. At the same time, we prepared nanometer ZnO by adoption the technology of ultrasonic, microwave and surface-coated. Nanometer ZnO is high disperse, low reunite, high alive and single by above method. Product's pure is high by XRD analyzed. Product is sphericity and size about 40nm by SEM and TEM inspected. The decompose temperature of precursor is 400C TG analyzed. The nanoparticles surface-coated with dispersant by IR analyzed.
    Prepared nanometer-size ZnO based on paralled flow precipitation method with Zincdross. In this progress we used the technology of ultrasonic, microwave and surface-coated. Granularity is thin, distributing is narrow, disperssing is fine. Especially the technics need not highness equipment and may easily industrialization.
    The study of prepared nanometer-size ZnO not only open up new product but also find out a new way of utilizeation of Zincdross. Especially, this progress has high stratagem in using resource of zinc , advance level of utilize and protecting circumstance
引文
[1] Shimizu. Katsura. JP, 62260716.
    [2] Kawamura, Kyoko. JP, 04164814.
    [3] Matsushita, Fujio. JP, 60255620
    [4] Mitarai, Takeshi. JP, 63288914
    [5] SuzukiM, KagawaM,SyohoY,etal. Jmater Sci, 1992,27(3):679~684
    [6] BarringerE, FegleyM,BruleJr, etal. US, 4543341
    [7] DuggerC. WO, 9317959
    [8] EI shallMS, SlackW, YannW, etal. JPhysChem, 1994, 1998(12):3067~3070
    [9] HohenBergerG, TomamdlG. Jmater Res, 1992,7(3):546~548
    [10] JuCS, LeeMG, HonnSS. HwahakKonahak, 1997,35(5):655~660
    [11] HarcrosCorp.涂料工业[J],1997(4):48
    [12] 李栋梁等.直接沉淀法制备纳米ZnO.化工新型材料[J].2002年6月,第30卷第61期47~50
    [13] 张绍岩等.均匀沉淀法合成纳米ZnO及其光催化性能研究.化学学报[J].2002年第60卷1225-1229
    [14] 郭新等.材料科学与工程.1994,12(1):58~61
    [15] 丁士文等.直接沉淀法制备纳米ZnO及其光催化性能.无机化学学报[J].2002年10月第18卷第10期1015~1019
    [16] 刘超峰等.化工新型材料[J].1995,23(11):13~15
    [17] 祖庸等.现代化工[J].1997,17(9):33~35
    [18] 宋红艳等.现代化工[J].1997,17(6):44
    [19] 赵新宁等.无机材料学报[J].1996,11(4):611~616
    [20] 顾达,胡黎明等.CN,1166454A
    
    年第5期
    [51] 钟胜,戴永年.真空蒸发冷凝制备超细锌粉的研究.昆明理工大学学报[J].第23卷第3期 1998年6月
    [52] 曹茂盛.气相还原法制备α-Fe超细粉末.材料科学与工艺[J].第3卷第3期 1995年9月
    [53] 李虹等.碳热还原法制备氮化硅粉体的反应过程[J].第11卷第2期1996年6月
    [54] 余润洲等.碳热还原ZrSiO4制备ZrO2(Y2O3)粉末和SiC纳米粉末[J].第52卷第1期2001年1月
    [55] 夏长泰等.水热法制备BaTiO3粉体.无机材料学报[J].第10卷第3期1995年9月
    [56] 王秀峰等.水热法制备纳米陶瓷粉体.稀有金属材料与工程[J].第24卷第4期1995年8月
    [57] 刘思林等.用热分解法制备纳米级铁粉.粉末冶金工业[J].第9卷第2期 1999年4月
    [58] 何方岳.微乳法制备纳米碳酸钙.化工新型材料[J].第29卷第7期 2001年7月
    [59] 张宇民等.燃烧合成TiN陶瓷.宇航材料工艺[J].1999年第4期
    [60] 赵兴科等.TiNi合金粉末烧结与燃烧合成工艺.粉末冶金技术[J].2000年第18卷 第3期
    [61] 苏育志.纳米结构材料的模板合成方法.料科学与工程[J].第17卷 第4期总第68期 1999年12月
    [62] 何峰等.制备超细金属粉末的新型电解法.金属学报[J].第36卷第6期 2000年6月
    [63] 李志平等.贵金属合金焊粉制造.贵金属[J].第21卷第1期.2000年3月
    [64] 伍沅.干燥技术的进展和应用.化学工程[J].第23卷第3期 1995年6月25日
    [65] 卢寿慈著.粉体加工技术[M].中国轻工业出版社.1999年4月
    [66] 张立德著.纳米材料.化学工业出版社[M].2000年11月
    [67] 王成云等.纳米技术在化妆品中的应用.香料香精化妆品[J].2001年12月,第6期31~37
    [68] 罗敏.纳米技术在纺织中的应用.化工新型材料[J].2001年7月,第29卷第7期29~30
    [69] 刘登良等.纳米技术在涂料中的应用前景.中国涂料[J].2001年第3期9~12
    [70] 赵光贤.纳米氧化锌及其在橡胶中的应用.中国橡胶[J].第18卷第8期18~21
    [71] 陈建新等.超细颗粒的制备及应用.无机盐工业[J].2001-01,33(1)
    [72] 王玉棉,王胜,侯新刚等并流沉淀法制备纳米氧化锌粉体[J]。有色金属(冶炼部分)2003年6期43~46
    [73] Sugimoto T.Preparation of Mondispersed Colloidal Particles Tadao Sugimoto.Adv Colloid Interface Sci, 1987(28):65