摘要
二沉池是常规水处理工程中的重要组成部分。其体型和尺寸的设计合理与否,直接影响沉淀池内的流态和沉淀效果。本论文主要运用FLUENT软件,分析二沉池内的速度场合浓度场从研究二沉池的速度场和浓度场出发,分析了沉淀池结构体形的变化对池内流态和沉淀效果的影响,探讨了二沉池的体形优化问题和提高沉淀效率问题。
研究结果认为:1.在进行二沉池流场模拟计算时,应按紊流模型进行;2.按二维模型模拟计算能够正确反映出二沉池实际流场情况,不必再按照三维流动模型模拟计算;3.合理改变沉淀池的结构体形和尺寸,可以改善沉淀池内的流场流态,提高沉淀池的沉淀效果;
本论文的研究成果可为实际工程中二沉池的优化设计提供参考依据和技术支持,也将推动二沉池设计水平的提高。
作为本论文研究工作的延续,今后还有待于通过试验研究对本论文的研究结果做进一步的分析论证。此外,还应结合实际工程应用,进一步完善对沉淀池体形和尺寸的优化,以期提高沉淀池的沉淀效果。
The second sedimentation tank is an important part in the waste water treatment. Its bodily form and size is reasonable or not will affect straightly the flow state and the sedimentation. The paper studies and calculated the flow field and the concentration field with the Fluent software mostly, and analyses the flow state and the sedimentation of the second sedimentation tank on the change of its structure, and discusses the shape-optimization and the improvement of the sedimentation.
The following conclusions are obtained: 1. we should take the turbulent model on the flow field calculation about the second sedimentation tank; 2. the turbulent flow field of the second sedimentation tank under the three dimension condition is not necessary, two-dimensional is reasonable; 3. change the structure and the size of the second sedimentation tank reasonably will improve the flow state and the sedimentation.
The study on the paper provides references about the shape-optimization of the second sedimentation tank in practical projects, and improve the design level.
However, in the future, we can analysis and demonstration the study of the paper by experimentation. We also should perfect the shape-optimization and the size of the second sedimentation tank.
引文
[1]张希衡主编.水污染控制工程(第二版).北京:冶金工业出版社.1993.4.
[2]许保玖编著.给水处理理论.北京:中国建筑工业出版社.2000.10.
[3]姚重华编著.环境工程仿真与控制.北京:高等教育出版社.2001.8.
[4]苏铭德、黄素逸编著.计算流体力学基础.北京:清华大学出版社.1997.3.
[5]郭振宁著.污水排放水利学.北京.科学出版社.2001.9.
[6]徐常昭编著.环境流体力学导论.北京:清华大学出版社.1992.10.
[7]程声通、陈毓玲编著.环境系统分析.北京:高等教育出版社.1990.4.
[8]顾正平.周边式二次沉淀池流态的计算模拟研究的数值方法.环境科学研究,1995,VOL8,No.3,P50-52.
[10]曾光明,葛卫华等.数值模拟方法在二维沉淀池优化设计中的应用.环境工程.2002,No.2,P10-12.
[12]张庄.沉淀池沉淀效果的数值分析.清华大学学报(自然科学版).1998年第38卷,第1期,P96-99.
[13]马鲁铭,金志刚等.周边式二次沉淀池流态的计算模拟研究.环境科学学报.1992,Vol12,No.4,P391-398.
[15]朱炜,马鲁铭,屈强.PHOENICS数值模拟平流式二沉池流场.水处理技术.2005,12,3(12):63-66.
[17]罗程亮,张明泉,桑学峰.用Visual Basic语言实现污水处理平流式沉淀池的计算机辅助设计.甘肃科技,2005,2,21(2):45-48.
[18]蔡金傍,段祥宝,朱亮.沉淀池水流数值模拟[J].重庆建筑大学学报,2003,8,25(4):64-69.
[19]蔡金傍,朱亮,段祥宝.平流沉淀池数值模拟分析[J].河海大学学报(自然科学版).2004,32(1):27-30.
[21]盛义平,张晓春.沉淀池的工作特性与数学模型.燕山大学学报.2001,10,4(25):309-311.
[22]屈强,马鲁铭,王红武.初沉池内速度场数值模拟.环境保护科学.2006,4,2(32):8-10.
[24]ImamE MccorquodaleJA, BewtraJK, Numeical Modelings of sedimentation tanks [J]. J. Hydro. Eng. ASCE.1983.109(12):1740-1754.
[25]AdamsEW. RodiW. Modelings flow and mixing in sedimentation tanks [J]. J.Hydro. Eng. ASCE. 1990.116(7):895-913.
[26]ZhouS, MccorquodaleJA. Modelings of Rectangular settling tanks [J]. J. Hydro. Eng. ASCE. 1992.118(10):1391-1405.
[27]A.DEININGER,E .HOLTHAUSEN and WILDERER. VELOCITY AND SOLIDSD ISTRIBUTION IN SIRCULAR SECONDARY CLARIFIERS :FULL SCALE MEASUREMENTS AND NUMERICA LMODELING. Wat.Res. 1998, VOL32, NO.10, P2951-2958.
[28]Yee-ChungJin, Associate Member, ASCE, Qing-Chao Guo and Thiruvenkata chari Viraraghavan, Fellow, ASCE. MODELING OF CLASS SETTLING TANKS. JOURNAL OF ENVIRONMENT ENGINEERING. 2000,Vol.126,No.8,P754-760.
[29] G.Mazzolani,F.Pirozzi and G.dAntonoi.A GENERALIZED SETTING APPROACH IN THE NUMERICAL MODELING OF SEDIMENTATION TANKS.1998,Vol.38,N0.3,P95-102.
[30]王福军编著.计算流体动力学分析[M].北京:清华大学出版社.2004:11-13,25-26,63-111.
[31]王志东,汪德觀,赖锡军.非正交同位网格中的SIMPLE算法[J].河海大学学报,2003,(5):509-512.
[32]Ferziger.pericM. Computational methods for fluids dynamics [M]. America: Springer, 1999:638-642.
[33] Rchie C.M.Chow W.L.A numerical study of the turbulent flow past an isolated airfoilwith trailing edge separation[J].American Institute of Aeronautics and Astronautics. 1983, (21): 1525-1552.
[34]陶文锉.数值传热学(第二版)[M].西安交通大学出版社,2001:255.
[35]陶文锉.计算传热学的近代发展[M].北京:北京科学出版社,2000:63-65.
[36] Patankar S. V.Spalding D.B.A calculation procedure for heat,mass and momentum transfer in three-dimensional parabolic flows[J].Int J Heat Mass Transfer 1972,(15)1787-1806.
[37]周雪漪.计算水力学[M].北京:清华大学出版社,1995:122-125.
[38]郭鸿志.传输过程数值模拟[M].北京:冶金工业出版社,1998:256-258.
[40] Camp T R. Sedimentation and the design of settling tanks[J].Tran Ame Soci of Civil Eng,1946,1(3):895-936.
[41]郭生昌.沉淀池的计算机数值模拟[D].上海:东华大学.2004.