路基土体注浆离心模型试验研究及数值模拟分析
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
本论文以“绵广高速公路路基病害灌浆处治效果结构性评价”项目为依托,结合路基土体注浆加固的工程实例,在大量的文献调查的基础上,以室内离心机模型试验和数值模拟为手段,对路基土体注浆加固效果和注浆过程进行研究分析,取得的成果及创新性总结如下:
     1.通过文献调查,探讨了现有注浆加固技术、注浆材料以及浆液性质,总结了主要的注浆理论以及基本研究方法。
     2.设计制造了室内注浆模拟装置,模拟路基土体注浆过程,记录注浆过程中所发生的各种现象;通过离心机模型试验,对土体注浆加固前后沉降进行实时观测分析,并对各阶段土体强度进行测试,分析各注浆参数对注浆加固效果的影响。
     3.采用真实破裂有限元分析系统RFPA,建立平面应变模型,模拟考虑应力影响下的劈裂注浆过程,再现土体注浆过程,描述了密实性土体劈裂注浆各阶段及其特性,研究了不同注浆阶段水头分布、浆液流动等特点,分析了注浆过程中应力分布状态及其变化规律,并讨论了不同土体强度特性参数对应力分布及浆脉分布规律的影响。
     4.基于稳定——非稳定渗流理论,利用岩土专业有限元软GEOSLOPE中的SEEP/W模块,建立轴对称模型,对疏松性土体渗透注浆进行模拟分析,讨论了不同注浆方式的浆液渗透路径及其浆液压力分布,分析了不同注浆方式的影响范围及随注浆压力变化的规律,研究了浆液扩散范围及压力分布随时间变化的影响,描述了渗透注浆各阶段压力分布、浆液扩散范围等特点。
Based on the structural evaluation project of treatment effects in mianguang-highway subgrade filling Disease with the way of grouting, with the example of subgrade soil grouting project and literature survey, by means of the three-dimension FEM analysis model and centrifugal model test, analyze the reinforcement effect and grouting Process, the conclusions are as follows:
     1. Through the investigation of literatures, discusses the grouting Reinforcement Technique、grouting material and grout Properties, summarizes the grouting theories and Research Methods;
     2. Grouting Equipment was designed and manufactured to simulate grouting. Phenomenon of grouting was recorded during the simulation process; sedimentation observation and analysis was held with the centrifugal model test, and tested the strength of soil in every period, analyzed the parameter Influence of reinforcement effect;
     3. The software RFPA is used to build a plane strain model and Simulate the fracturing grouting process. Reconstruct the process of grouting, and described characteristics of each stage, including pressure distribution、Slurry flow and so on. The stress" distribution and the change law during the soil grouting were analyzed, and discussed the effect of stress distribution and grouting fabric in soil corresponding to different strength parameters.
     4. Based on the theory of Steady and Unsteady Seepage, SEEP/W Module in GEOSLOPE which in a FEM software used in geotechnical, was used to build a axisymmetric model and simulate the permeation grouting. Discussed the seepage path and slurry pressure distribution in different diffusion manners, analyzed the influence scope change law with grouting pressure, and studied the temporal variation laws of diffusion range and slurry pressure distribution, and described the diffusion range and slurry pressure distribution in every stage.
引文
[1]《岩土注浆理论与工程实例》协作组.岩土注浆理论与工程实例[M].北京:科学出版社.2001.
    [2]王兴华,周海林.震动注浆原理及其理论基础[M].北京:中国铁道出版社.2007.
    [3]李相然,贺可强.高压喷射注浆技术与应用[M].北京:中国建材工业出版社.2007.
    [4]杨秀竹.静动力作用下浆液扩散理论与试验研究[D].中南大学博士论文.2005.
    [5]四川省交通厅公路规划勘察设计研究院.绵阳至广元高速公路路基病害情况调查报告[R].2005.
    [6]郭广磊.粘土中压力注浆动态数值模拟研究.[D].山东大学硕士学位论文.2006.
    [7]冯旭海.压密注浆作用机理与顶升效应关系的研究.[D].煤炭科学研究总院硕士学位论文.2003.
    [8]潘志强.粗砂层中水泥渗透注浆渗透理论与计算机仿真研究[D].辽宁工程技术大学硕士学位论文.2006.
    [10]曹建建.粘性土水力劈裂全过程数值模拟及影响因素研究[D].河海大学硕士学位论文.2006.
    [9]王俊杰.土体水力劈裂计算理论综述[J].第二界全国岩土与工程学术大会论文集.2006.
    [12]孙亚平.水力劈裂机理研究[D].北京:清华大学,1985.
    [13]Morgenstern N R,Vaughan P R.Some observations on allowable grouting pressures [A]Grouts and Drilling Muds in Engineering Practice[C]London:Butter worth 1963
    [14]Alfaro M C,Wong R C K.Laboratory studies on fracturing of low2permeability soils[J].Canadian Geotechnical Journal,2001
    [15]Mori A,Tamura M.Hydro fracturing pressure in cohesive soils.[J].Soils and Foundations,1987
    [16]Panah A K,Yanagisawa E.Laboratory studies on hydraulic fracturing criteria in soil[J].Soils and Foundations,1989
    [17]Vaughan P R.The use of hydraulic fracturing tests to detect crock formation in embankment dam cores[R].London.Department of Civil Engineering,Imperial College,1971.
    [18]Lo K Y,Kaniaru K.Hydraulic fracture in earth and rocks fill dams[J].Canadian Geotechnical Journal,1990
    [19]曾开华.土质心墙水力劈裂机理及其影响因素的研究[D].河海大学,2001.
    [20]唐春安.岩石破裂过程数值试验[M].科学出版社,2003年
    [21]Brady B.H.G,Brown E.T.Rock Mechanics.[D]London:Chapman & Hall,1993
    [22]章定文,刘松玉.土体中水力劈裂研究进展.[J]水力水运工程学报,2006年6月
    [23]葛家良,陆士良.注浆模拟试验及其应用的研究.[J]岩土工程学报,1997年5月
    [24]沈锡英.渗透注浆中浆液渗流分析[J].同济大学学报,1994年6月
    [25]张驰,王杰,杜嘉鸿.岩土注浆技术的理论探讨[J].沈阳建筑工程学报,2001年1月
    [26]李哲.高压注浆渗流数学模型与工程应用[J].岩土力学.2005年12月
    [27]李相然.高压喷射注浆技术应用[M].中国建材工业出版社.2007年8月
    [28]毛昶熙.渗流计算分析与控制[M].北京:水力电力出版社,1990
    [29]阮文军.注浆扩散与浆液若干基本性能研究[J].岩土工程学报.2005年1月
    [30]孙斌堂,凌贤长,凌晨.渗透注浆浆液扩散与注浆压力分布数字模拟[J].水利学报.2007年11月
    [31]李萍,张琦,陈小念.降雨条件下饱和一非饱和土坡的渗流分析[J].兰州理工大学学报.2007年12月
    [32]吴梦喜,高莲士.饱和非饱和土体非稳定渗流数值分析[J].水利学报.1999年12月
    [33]邹金锋,李亮,杨小礼,胡振南.土体劈裂灌浆力学机理分析[J].岩土力学.2006年4月
    [34]冷雪峰,杨天鸿,国怀专,李连崇.单孔岩石水压致裂过程的数值模拟分析[J].有色金属.2002年10月
    [35]冷雪峰,唐春安,李连崇.非均匀孔隙压力下水压致裂的数值试验[J].东北大学学报.2003年24月
    [36]孙立新.劈裂灌浆压力的能量法解析[J].企业技术开发.2006年12月
    [37]高骥,雷光耀.堤坝饱和-非饱和渗流的数值分析,岩土工程学报,1988,6
    [38]李宁,张平,闫建文.灌浆的数值仿真分析模型探讨[J].岩土力学与工程学报.2002年3月
    [39]屈妍,沈学毅.软粘土地基注浆研究[J].工程勘察.2007年8月.
    [40]杨锋.砂砾石层滋浆试验研究及渗流计算分析[M].中国水利水电科学研究院硕士研究生学位论文.2005年2月.
    [41]滕红军.厦门翔安(海底)隧道富水砂层注浆试验研究[J].山西建筑.2007年 8月.
    [42]李冠奇.致密土体劈裂注浆的力学机理及试验研究[M].铁道科学研究院硕士学位论文.2006年7月.
    [43]杨天鸿,唐春安,朱万成,冯启言.岩石破裂过程渗流与应力耦合分析[J]岩土工程学报.2001年第23期.
    [44]李连崇,杨天鸿,唐春安,杨春和.岩石水压之列过程的耦合分析[J].岩石力学与工程学报.2003年7月.
    [45]John Krahn.Stability Modeling with slope/w[M],May 2004.
    [46]John Krahn.Seepage Modeling with slope/w[M].Canada:GEO-SLOPE international,LTD.May 2004.
    [47]梅志华,习小华,智广.压力注浆在高速公路路基塌陷治理中的应用[J].华东交通大学学报.2007年8月.