中药材中重金属的分析方法及其吸收富集特征研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
随着中药产业的发展,中药的安全性问题日益受到国内外的普遍关注。近些年来,中药重金属问题引起了国际上的高度重视。中药重金属含量超标不仅降低了中药质量、影响了用药的安全性,还制约了中药的出口,因此对中药中重金属进行控制已成为当前急需解决的重要问题之一。解决并控制好中药中重金属的含量,对于提高中药质量、保证用药安全,以及开拓中药的国际市场等均具有重要的意义。
     对于中药重金属的质控,首先要求建立科学的中药重金属分析方法。按照目前的国内外标准,在中药中通常监控的有害重金属元素主要包括铅(Pb)、镉(Cd)、汞(Hg)、铜(Cu)、砷(As)等。在对中药中重金属元素进行分析时,先要对样品进行适当的前处理,进而采用相应的仪器测定其中重金属元素的含量。目前常用的样品前处理方法主要有湿法消解、干法消解和微波消解法等;常用的测定方法主要有电感耦合等离子体质谱法(ICP-MS)、原子吸收光谱法(AAS)、原子荧光光谱法(AFS)等。
     中药重金属的质控,还应贯穿于药材的种植等一系列的过程中。中药重金属污染与多方面的因素有关,为了从源头控制中药中重金属的含量,我国开展了中药材的规范化种植研究。对药材而言,其中重金属含量的高低,主要取决于两个方面:一是土壤中重金属元素含量及土壤的性质;二是药材本身对重金属元素的选择和积累能力,而不同种类的药材对不同重金属元素的富集、积累能力是不同的。开展药材及其土壤中重金属元素的相关性研究和药材对重金属元素的吸收富集特征研究对于从源头上控制中药中重金属限量具有十分重要的指导意义,为进一步完善中药材规范化种植基地的土壤环境质量评价标准提供科学依据。
     砂仁、佛手、巴戟天、穿心莲、广藿香是临床常用药物和南药的主要品种,需求量较大,而且其药用部位不全相同,基体性质各异,具有一定的代表性,因此,本研究选择这五种药材作为研究对象,以铜、砷、镉、铅、汞五种重金属元素为研究指标,先对样品的前处理方法及不同测定方法进行了系统的对比研究,进而在此基础上,建立了一种准确、快速、简便的中药材中重金属分析方法。然后利用所建立的方法对药材样品进行分析,探讨了中药材及其生长土壤中重金属元素的相关性,为揭示中药材重金属污染的来源提供了科学依据,对中药材的规范化种植也具有一定的指导意义。此外,还研究了广东道地药材广藿香对土壤重金属元素的吸收富集特征,为科学管理中药材种植基地土壤环境和生产质量控制提供科学依据。现将主要研究内容和结果概述如下:
     1.中药材样品前处理方法的研究
     1.1中药材中铜、砷、镉、铅元素的前处理方法研究
     分别采用湿法、干法和微波消解法对样品进行前处理,然后利用电感耦合等离子体质谱法(ICP-MS)测定其中铜、砷、镉、铅四种元素的含量。通过对结果进行方差分析,探讨不同前处理方法对四种元素测定结果的影响,以期选出一种适合于中药材中这四种重金属元素分析的最佳前处理方法。在湿法中,对消解体系进行了比较,分别采用硝酸、硝酸-过氧化氢、硝酸-高氯酸对样品进行消解,结果表明,以硝酸-高氯酸作为消解体系时效果最佳;在干法中,对灰化温度进行了考察,分别以400、500、600℃对样品进行灰化处理,结果表明,对于铜和铅,最佳灰化温度为500℃,对于砷和镉,由于在高温下极易损失而使测定结果显著偏低,所以不宜采用该法;在微波消解法中,采用正交试验设计对微波消解条件进行了优化,得到了四种元素的最佳微波消解程序。通过对湿法、干法和微波消解法的对比,得出微波消解法为最佳样品前处理方法。因此,本研究选择微波消解法作为样品前处理方法,通过实验确定的最佳微波消解程序可用于中药材中铜、砷、镉、铅四种元素的前处理。
     1.2中药材中汞元素的前处理方法研究
     分别采用湿法和微波消解法对样品进行前处理,然后利用冷原子吸收光谱法(CVAAS)测定其中汞元素的含量。通过对结果进行方差分析,探讨不同前处理方法对汞测定结果的影响,以期选出一种适合于中药材中汞元素的最佳前处理方法。在湿法中,考察了硝酸-高氯酸和五氧化二钒-硝酸-硫酸两种消解体系;在微波消解法中,采用正交试验设计对微波消解条件进行了优化,得到了汞的最佳微波消解程序。通过对不同前处理方法的对比,得出微波消解法为汞元素分析时的最佳前处理方法。因此,本研究选用微波消解法作为样品的前处理方法,通过实验确定的最佳微波消解程序可用于药材中汞元素的前处理。
     2.中药材中重金属不同测定方法的对比研究
     2.1 AAS和ICP-MS测定中药材中铜、砷、镉、铅的对比研究
     样品经微波消解法处理后,分别采用AAS法和ICP-MS法测定其中铜、砷、镉、铅四种元素的含量。通过对测定结果进行统计分析,比较两种方法是否存在差异。配对t检验结果表明,两种测定方法所得结果之间无显著性差异(p>0.05)。虽然两种测定方法均有较好的准确度,但ICP-MS法比AAS法更加快速、简便,所以本研究首选ICP-MS法作为药材中铜、砷、镉、铅四种重金属元素的测定方法。
     2.2 CVAAS和AFS测定中药材中汞的对比研究
     样品经微波消解法处理后,分别采用CVAAS法和AFS法测定其中汞元素的含量。通过对测定结果进行统计分析,比较两种方法是否存在差异。配对t检验结果表明,两种测定方法所得结果之间无显著性差异(P>0.05)。虽然两种测定方法的准确度均较好,但以CVAAS法的操作更为简便、快速,因此本研究首选CVAAS法作为药材中汞元素的测定方法。
     3.中药材中重金属分析方法的建立
     3.1微波消解-ICP-MS法测定中药材中铜、砷、镉、铅方法的建立
     以微波消解法对样品进行处理,然后采用ICP-MS法测定其中铜、砷、镉、铅四种元素的含量,建立了中药材中这四种有害重金属元素的分析方法。铜、砷、镉、铅四种元素的线性范围分别为0~500μg·L~(-1)、0~50μg·L~(-1)、0~10μg·L~(-1)、0~100μg·L~(-1),相关系数r分别为0.9995、0.9997、0.9996、0.9995;检出限(S/N=3)分别为0.013、0.065、0.004、0.010μg·L~(-1),定量限(S/N=10)分别为0.045、0.216、0.012、0.033μg·L~(-1);方法的重复性分别为1.2%、2.0%、3.5%、1.6%(n=5);加标回收率分别为103.0%、96.5%、95.8%、98.7%,RSD分别为2.0%、2.7%、3.5%、3.2%(n=6)。结果表明,该法准确、快速、简便,适用于中药材中铜、砷、镉、铅四种重金属元素的含量测定。
     3.2微波消解-CVAAS法测定中药材中汞方法的建立
     以微波消解法对样品进行处理,然后采用CVAAS法测定其中汞元素的含量,建立了中药材中有害重金属元素汞的分析方法。汞元素的线性范围为0~6 ng·mL~(-1),相关系数r为0.9997;检出限(S/N=3)为0.204 ng·mL~(-1),定量限(S/N=10)为0.679ng·mL~(-1);方法的重复性为3.0%(n=5);加标回收率为93.6%,RSD为3.5%(n=6)。结果表明,该法准确、快速、简便,适用于中药材中汞元素的含量测定。
     4.中药材及其土壤中重金属元素的相关性研究
     对砂仁、佛手、巴戟天、穿心莲和广藿香五种广东地产药材及其生长土壤中铜、砷、镉、铅、汞五种重金属元素的含量进行测定,然后采用相关分析的方法探讨药材及其土壤中重金属元素的相关关系。相关分析结果表明,砂仁中铜、砷、镉、铅、汞含量与土壤中铜、砷、镉、铅、汞含量相关关系均不显著;佛手中铜含量与土壤中铜含量呈显著的相关关系,而其它四种元素在药材与土壤中的含量均无显著的相关关系;巴戟天中铜含量与土壤中铜含量呈极显著的相关关系,砷、镉、汞含量与土壤中砷、镉、汞含量呈显著的相关关系,而铅与土壤中铅含量相关关系不显著;穿心莲、广藿香中铜含量与土壤中铜含量均呈极显著的相关关系,两种药材中砷、镉含量与土壤中砷、镉含量呈显著的相关关系,而两种药材中铅、汞含量与土壤中铅、汞含量均无显著的相关关系。研究结果说明,不同种类的药材对土壤中重金属元素的吸收具有选择性;不同重金属在植物-土壤系统中的迁移规律是不同的,以土壤中的铜较易被药材吸收积累,砷和镉次之,而铅和汞的迁移性相对较弱。
     5.广藿香对重金属元素的吸收富集特征研究
     通过对不同生长时间的广藿香中铜、砷、镉、铅、汞五种重金属元素的含量进行测定,研究重金属在广藿香体内的动态吸收积累特征。结果表明,五种重金属元素在广藿香地上部分中的含量均随着生长时间的延长而增加;在根中,铜和汞的含量随生长时间的延长而增加,但砷和镉的含量却随时间的延长呈下降趋势,而铅在根中的含量随时间变化不明显。分析了广藿香对土壤中重金属元素的富集能力,结果表明,不同部位对各种重金属的富集能力不同,以叶对重金属的富集能力相对较强;由富集系数的大小可以看出,广藿香对铜元素的富集能力相对较强,而对砷、镉、铅、汞四种元素的富集能力相对较弱。本研究还探讨了广藿香中重金属含量与土壤中重金属含量及土壤性质之间的关系,多元回归分析结果表明,广藿香各部位对铜、砷、镉的吸收富集均受土壤性质影响,广藿香根对铅的吸收富集也受土壤性质影响,得到的回归方程可用于根据土壤中重金属含量及土壤性质计算广藿香中该元素的含量;而广藿香各部位对汞的吸收富集与土壤中汞含量和土壤性质的关系不明显,广藿香地上部分对铅的吸收富集与土壤中铅含量和土壤性质的关系也不明显,这说明除了上述因素外,还与其他因素有关,原因有待于进一步研究。
With the development of the traditional Chinese medicine,its safety problem is increasingly subjected to a domestic and oversea widespread concern.In recent years,the problem of heavy metals in traditional Chinese medicine aroses a high international recognition.The excess content of heavy metals in traditional Chinese medicine not only influenced its quality and its medication safety,but also restricted the export of traditional Chinese medicine.Therefore,to control the content of heavy metals in traditional Chinese medicine has become one of the important problems which need solving urgently at present. It has an important meaning in ensuring the quality and the medication safety of traditional Chinese medicine,it is also important to expand the international market of traditional Chinese medicine.
     In order to control the heavy metals in traditional Chinese medicine,we should firstly establish a scientific analytical method of heavy metals in traditional Chinese medicine. According to the current international standard,the harmful heavy metals controlled in traditional Chinese medicine mainly includes lead(Pb),cadmium(Cd),mercury(Hg), copper(Cu),arsenic(As),etc..When we analyse the heavy metals in traditional Chinese medicine,we should process the sample properly and then use instrument determine the contents of heavy metal elements.At present,the sample pre-processing methods mainly include wet digestion,dry digestion and microwave digestion and so on;and the determination methods mainly include inductively coupled plasma mass spectrometry (ICP-MS),atomic absorption spectrometry(AAS) and atomic fluorescence spectrometry (AFS),etc..
     To control the heavy metals in traditional Chinese medicine,we should also carry it out in a series of process like herbal planting.Heavy metal contamination in traditional Chinese medicine has something to do with many factors.In order to control the contents of heavy metals in traditional Chinese medicine originally,we put into effect Good Agricultural Practice(GAP) of Chinese medicinal materials.The contents of heavy metals in medicinal materials mainly depends on two factors:one is the contents of heavy metals in the soil in which the medicinal materials grows and the soil property;the other is the accumulation capability of the medicinal materials,and different kinds of medicinal materials have different accumulation capability to different heavy metals.The research on correlation of heavy metals in Chinese medicinal materials and their soils has a very important instruction meaning to control the contents of heavy metals originally,so is the study on absorption and accumulation characteristics of heavy metals in Chinese medicinal materials.And at the same time,they will also provide scientific basis to further perfect soil environment quality evaluation standard of Chinese medicinal materials production base.
     Fructus Amomi,Fructus Citri Sarcodactylis,Radix Morindae Officinalis,Herba Andrographis and Herba Pogostemonis are commonly used clinical medication and the main breed of south medicines,they are demanded greatly in the market.The medicinal parts of the five Chinese medicinal materials are not same,and their matrix nature are different.Therefore,we choosed the five Chineses medicinal materials as study objects, choosed copper,arsenic,cadmium,lead and mercury as study targets,we studied the sample pre-processing methods systemly,compared the different determination methods, and established the analytical method of heavy metal in Chinese medicinal materials which was accurate,rapid and convenient.Furthermore,we studied the correlation of heavy metals in Chinese medicinal materials and its soils,this study will provide scientific basis to discuss the source of heavy metal in Chinese medicinal materials.We also studied the absorption and accumulation characteristics of heavy metals in Herba Pogostemonis which is one of the famous-region drugs in Guangdong province,this study will provide scientific basis to administer the soil environment quality of the Chinese medicinal materials growth base and to control the production quality.
     The main contents and results of the study are as follows:
     1.Study on sample pre-processing method
     1.1 Study on pre-processing method of copper,arsenic,cadmium and lead in Chinese medicinal materials
     We processed the sample with wet digestion,dry digestion and microwave digestion respectively,and used ICP-MS determine the contents of copper,arsenic,cadmium and lead.Then we analysed the results with analysis of variance in order to discuss the influence of different pre-processing methods.By doing this we wanted to find an optimal pre-processing method for the four heavy metal elements in Chinese medicinal materials.In wet digestion method,we compared the different digestion systems.We digested the samples with nitric acid,nitric acid-hydrogen peroxide and nitric acid-perchloric acid respectively,the results showed that the effect of nitric acid-perchloric acid as the digestion systemwas better.In dry digestion method,we compared different ash temperatures.We processed the samples with the temperatures that were 400℃,500℃and 600℃,the results showed that the optimal ash temperature of copper and lead was 500℃,arsenic and cadmium were not suitable for the dry digestion.In microwave digestion method,we optimized the microwave digestion conditions with the orthogonal experiment and got the optimal microwave digestion process of the four elements.By comparing the three methods, we concluded that the microwave digestion was the best pre-processing method.So we choosed the microwave digestion as the sample pre-processing method in this study,and the optimal microwave digestion process we got in the experiment could be applied for the pre-processing of the four elements in Chinese medicinal materials.
     1.2 Study on pre-processing method of mercury in Chinese medicinal materials
     We processed the sample with wet digestion and microwave digestion respectively, and used cold-vapor atomic absorption spectrometry(CVAAS) determine the content of mercury.Then we analysed the results with analysis of variance in order to discuss the influence of different pre-processing methods of mercury to the results.By doing this we wanted to find an optimal pre-processing method for mercury in Chinese medicinal materials.In wet digestion method,we choosed nitric acid-perchloric acid and vanadium pentoxide- nitric acid-sulphuric acid respectively as the digestion systems.In microwave digestion method,we optimized the microwave digestion conditions with the orthogonal experiment and got the optimal microwave digestion process of mercury.By comparing the different pre-processing methods,we concluded that the microwave digestion was the optimal pre-processing method of mercury.So we choosed the microwave digestion as the sample pre-processing method in this study,and the optimal microwave digestion process we got in the experiment could be applied for the pre-processing of mercury in Chinese medicinal materials.
     2.Study on different determination methods of heavy metals in Chinese medicinal materials
     2.1 Study on determination of copper,arsenic,cadmium and lead in Chinese medicinal materials by comparing AAS with ICP-MS
     The samples were processed with microwave digestion,then we used AAS and ICP-MS determine the contents of copper,arsenic,cadmium and lead.We analysed the results in order to compare whether the two methods had difference or not.The paired t-test results showed that the two methods didn't have significant difference(P>0.05).The two determination methods were accurate,but ICP-MS was faster and more convenient than AAS.So we choosed ICP-MS firstly as the determination method of the four elements in Chinese medicinal materials in this study.
     2.2 Study on determination of mercury in Chinese medicinal materials by comparing CVAAS with AFS
     The samples were processed with microwave digestion,then we used CVAAS and AFS determine the content of mercury.We analysed the results in order to compare whether the two methods had difference or not.The paired t-test results showed that the two methods didn't have significant difference(P>0.05).The two determination methods were accurate,but CVAAS was more convenient and faster.So we choosed CVAAS firstly as the determination method of mercury in Chinese medicinal materials in this study.
     3.Establishment of analytical method of heavy metals in Chinese medicinal materials
     3.1 Establishment of determination of copper,arsenic,cadmium and lead in Chinese medicinal materials by microwave digestion- ICP-MS
     We processed the samples with microwave digestion,then used ICP-MS determine the contents of copper,arsenic,cadmium and lead,and established the analytical method of the four harmful elements.The linear range of copper,arsenic,cadmium and lead were 0~500μg·L~(-1),0~50μg·L~(-1),0~10μg·L~(-1),0~100μg·L~(-1),their correlation coefficient were 0.9995, 0.9997,0.9996,0.9995;their detection limit were 0.013μg·L~(-1),0.065μg·L~(-1),0.004μg·L~(-1), 0.010μg·L~(-1),their determination limit were 0.045μg·L~(-1),0.216μg·L~(-1),0.012μg·L~(-1),0.033μg·L~(-1);the results of their reproducibility were 1.2%,2.0%,3.5%,1.6%(n=5);their recovery rates were 103.0%,96.5%,95.8%,98.7%,the values of their RSD were 2.0%, 2.7%,3.5%,3.2%(n=6).The results showed that the method was accurate,rapid and convenient,it can be applied to the determination of heavy metals in Chinese medicinal materials.
     3.2 Establishment of determination of mercury in Chinese medicinal materials by microwave digestion-CVAAS
     We processed the samples with microwave digestion,then used CVAAS determine the contents of mercury,and established the analytical method of mercury.The linear range of mercury was 0~6 ng·mL~(-1),the correlation coefficient was 0.9997;the detection limit was 0.204 ng·mL~(-1),the determination limit was 0.679 ng·mL~(-1);the reproducibility of the method was 3.0%(n=5);the recovery rate was 93.6%,RSD was 3.5%(n=6).The results showed that the method was accurate,rapid and convenient,it can be applied to the determination of mercury in Chinese medicinal materials.
     4.Study on correlation analysis of heavy metals in Chinese medicinal materials and their soils
     We determined the contents of copper,arsenic,cadmium,lead and mercury in Fructus Amomi,Fructus Citri Sarcodactylis,Radix Morindae Officinalis,Herba Andrographis, Herba Pogostemonis and the soils they growed.Then we discussed their correlativity by adopting correlation analysis.The results showed that the contents of copper,arsenic, cadmium,lead and mercury in Fructus Amomi and its soil didn't have significant correlativity;the content of copper in Fructus Citri Sarcodactylis and its soil had significant correlativity,but the contents of the other four elements in Fructus Citri Sarcodactylis and its soil didn't have significant correlativity;the contents of copper, arsenic,cadmium and mercury in Radix Morindae Officinalis and its soil had significant correlativity,but the content of lead in Radix Morindae Officinalis and its soil didn't have significant correlativity;the contents of copper,arsenic,cadmium in Herba Andrographis,Herba Pogostemonis and their soils had significant correlativity,but the contents of lead,mercury in the two medicinal materials and their soils didn't have significant correlativity.The results of the study revealed that different medicinal materials had selective absorption to heavy metals in the soil.The study also revealed that the transfer character of different heavy metals in plant-soil system was different,the copper in the soil was easily absorbed and accumulated by the medicinal materials,arsenic and cadmium took second place,but lead and mercury in the soil were difficult to be absorbed and accumulated by the medicinal materials.
     5.Study on the absorption and accumulation characteristics of heavy metals in Herba Pogostemonis
     We determined the contents of copper,arsenic,cadmium,lead and mercury in Herba Pogostemonis that grew at different time.By doing this we wanted to study the dynamic absorption and accumulation characteristics of heavy metal elements in Herba Pogostemonis.The results showed that the contents of the five heavy metal elements in the aerial parts of Herba Pogostemonis increased along with its growth period;the contents of copper and mercury in the root of Herba Pogostemonis also increased along with its growth period,but the contents of arsenic and cadmium in the root decreased along with growth period,and the content of lead in the root didn't have distinct change along with time.We studied the accumulation capability of Herba Pogostemonis to heavy metals in soil.The results showed that the accumulation capability of different parts to heavy metals was different,the leaf of Herba Pogostemonis had a relatively big accumulation capability to heavy metals in the soil.By analysing the accumulation coefficients,we found that the accumulation capability of Herba Pogostemonis to copper was relatively bigger,but it had a small accumulation capability to arsenic,cadmium,lead and mercury.We also studied the relation of the contents of heavy metals in Herba Pogostemonis and its soil property.The results of multiple linear regression showed that the absorption and accumulation of copper, arsenic,cadmium in every part of Herba Pogostemonis was influenced by the the soil property,so was lead in its root.The regression equations we got could be applied to calculate the contents of heavy metal elements in Herba Pogostemonis according to the contents of heavy metals in the soil and the soil property.But the absorption and accumulation of mercury in every part of Herba Pogostemonis had nothing to do with the content of mercury in the soil and the soil property,so did lead in its aerial parts.This revealed that there were other influencing factors besides the contents of heavy metals in the soil and the soil property,so the reason need further studying.
引文
[1]国家药典委员会.中华人民共和国药典(一部).北京:化学工业出版社,2005
    [2]张俊清,刘明生,符乃光,等.中药材微量元素及重金属研究的意义与方法.中国野生植物资源,2002,21(3):48-49
    [3]常学秀,文传浩,王焕校.重金属污染与人体健康.云南环境科学,2000,19(1):6l
    [4]Klabelitz L,Sievers H.Contaminants of medicinal and food herbs with a view to EU regulations.Innov Food Technol,November 2004,25
    [5]WHO.Quality control methods for medicinal plant materials-Revised draft update.September,2005.2005
    [6]Shen-Kuan Yee,Swee-Seng Chu,Yi-Min Xu,et al.Regulatory control of Chinese Proprietary Medicines in Singapore.Health Policy,2005,71:133-149
    [7]中华人民共和国对外贸易经济合作部.药用植物及制剂进出口绿色行业标准.北京:中国标准出版社,2001
    [8]陈怡和,祁雄,朱莹,等.中药房常用饮片重金属含量测定.中成药,2003,25(5):405
    [9]伊雄海,陆贻通.川芎等8种中药材中农药及重金属残留状况研究.现代中药研究与实践,2004,18(3):7-9
    [10]张俊清,符乃光,赖伟勇,等.海南广藿香等4种南药重金属含量研究.中国中药杂志,2006,31(12):1018-1019
    [11]冯江,黄鹏,周建民.100种中药材中有害元素铅、铜、砷的测定和意义.微量元素与健康研究2001,18(2):43-44
    [12]袁迎.3种中药重金属成分铅、镉的含量分析.中国药房,2007,18(6):447-448
    [13]叶国华,吕方军.21种中药材中重金属含量测定.辽宁中医杂志,2008,35(2):265-266
    [14]张晖芬,赵春杰.中药材中重金属的控制及其分析方法.中药研究与信息,2004,6(5):10-12
    [15]茅向军,杨永东,熊慧林,等.贵州杜仲中铅、砷、汞含量的研究.药物分析杂志,2000,20(3):172
    [16]顾兴平,顾永祚,胡明芬,等.中药川附子微量重金属元素的分析研究.四川环境,2002,21(3):4-7
    [17]殷捷,陈玉成.土壤重金属污染的全过程控制.四川环境,2000,19(1):27-30
    [18]卢进,申明亮.中药材重金属含量与控制.中医药管理杂志,1999,9(2):33-36
    [19]刘振武,李满飞.中药产业的持续发展与GAP.中草药,1999,30(1):4
    [20]马传丽,张平.三七无公害栽培.云南农业,2002,2:18
    [21]李存若,胡卓尧,徐华雄,等.绞股蓝中氨基酸及微量元素的研究.中国中药杂志,1989,14(1):41
    [22]汪宝琪,庞志功,余晓东.原子吸收法测定潞党参中微量元素铜铁锰锌.西北药学杂志,1990,5(1):21
    [23]张艳秋,王兆华,牛志多,等.高山红景天的微量元素和氨基酸含量分析.中草药,1990,21(6):11
    [24]杨武亮,周至明,任燕冬,等.枳壳中重金属及砷的含量测定.江西中医学院学报,2004,16(6):42-43
    [25]白研,钟上欢,蔡俊生,等.广东地产中药中几种重金属元素的含量测定.广东微量元素科学,2004,11(7):60-64
    [26]蒋纪祥.八种补阳中药微量元素的测定及临床药效浅析.基层中药杂志,1989,(3):30
    [27]李存兴,蒋纪祥.四种安神中药微量元素的含量分析.基层中药杂志,1991,(2):27
    [28]张晖芬,赵春杰,倪娜.5种补益类中药中重金属的含量测定.沈阳药科大学学报,2003,20(1):8-11
    [29]吴适缘,曹洪民,尹光华,等.凉山虫草与冬虫夏草中的微量元素的分析比较.中药通报,1988,13(10):40
    [30]李萍,徐国钧,金蓉鸾,等.中药贝母类的研究Ⅺ.28种元素分析.中国药科大学学报,1990,21(2):127
    [31]秦俊法.当归头、身、尾中的金属元素测定.上海中医药杂志,1982,(1):46
    [32]贡瑞生,张黎明,郑建科.山东瓜蒌氨基酸及微量元素的分析.中国中药杂志,1989,14(6):43
    [33]冯光泉,刘云芝,张文斌,等.三七植物体中重金属残留特征研究.中成药,2006,28(12):1796-1798
    [34]李曼玲,刘美兰.女贞子及其炮制品中的微量元素分析.中国中药杂志,1989,14(12):23
    [35]吕锋,张华田,杨巨华.山药炮制与微量元素的关系探讨.中药材,1991,14(9):31
    [36]刘守廷,关雄俊,李献萍.杜仲及其炮制品某些微量元素含量比较.中国中药杂志,1989,14(10):20
    [37]寇兴明,顾永祚,顾兴平.AAS法测定中药川附子微量重金属元素.四川环境, 1999,18(2):28-31
    [38]谢晓梅,汪电雷,郑荣庆,等.夏枯草和薯蓣不同部位铅镉汞砷的含量分析.安徽中医学院学报,2002,21(5):47
    [39]方军,陈建平,舒永红,等.ICP-MS法测定菊花茶中砷镉铜铅锌.理化检验(化学分册),2005,41(12):902-904
    [40]张永志,王钢军,朱嘉虹.原子荧光法测定田七中砷的含量.广东微量元素科学,2003,10(7):39-41
    [41]魏得良,黄熠,向牡秀,等.火焰原子吸收光谱法测定黄芪、甘草、广藿香中的铜.光谱实验室,2007,24(2):106-108
    [42]吴巧凤.紫外分光光度法测定元胡生品与醋制品的重金属含量.中国现代应用药学杂志,2002,19(5):401
    [43]金仁达,万红卫,钱佳星.甘草等5种中药中重金属含量的监测.中医药导报,2006,12(12):74-75
    [44]陈远航.枸杞等6种中药的重金属检测研究.药物研究,2007,4(20):144-145
    [45]梁淑敏,张景东,周浩然.人参粉中有害重金属含量测定.化学与粘合,2003,(4):205-206
    [46]石杰,龚雪云,朱永琴.氢化物发生-原子荧光法测定丹参、川芎中的铅.光谱学与光谱分析,2004,24(7):893-895
    [47]胡广林,李平.高压密封消解-冷原子荧光光谱法测定中药材中痕量汞.微量元素与健康研究,2007,24(1):40-41
    [48]李筱薇,高俊全,赵京玲.中药材中重金属的测定.卫生研究,2002,31(4):295-297
    [49]钱春燕,宋薇,杨彦丽,等.微波消解-原子吸收光谱法分析中药材中Pb,cd,As,Hg的含量.现代科学仪器,2004,10(4):38-40
    [50]蒋舜媛,孙辉,吴秀臣,等.不同产地羌活药材中的重金属及砷盐含量研究.中国中药杂志,2006,31(12):978-980
    [51]窦忠花,陈志忠.牛黄消炎片中雄黄的含量测定及可溶性砷盐检查.中国药事,2002,16(11):712
    [52]楼小红,吴巧凤.紫外分光光度法测定白芍中重金属的研究.广东微量元素科学,2004,11(1):38-40
    [53]董黎,沙明.高效液相色谱法测定独活等药材中重金属含量.时珍国医国药,2000,11(5):398
    [54]杨亚玲,杨国荣,胡秋芬,等.固相萃取富集-高效液相色谱法测定4种中草药中的重金属元素.药物分析杂志,2004,24(4):441-443
    [55]魏巍,屈凌波,李建军,等.用火焰原子吸收分光光度法测定地黄中的铅.郑 州大学学报(理学版),2002,34(1):65-68
    [56]冯光泉,张文斌,陈中坚,等.三七及其栽培土壤中几种重金属元素含量的测定.中草药,2003,34(11):1051-1054
    [57]孙楠,金红宇,薛健.原子吸收法测定中药材中6种重金属及有害元素的残留量.药物分析杂志,2007,27(2):256-259
    [58]田义杰.藏药蕨麻中重金属元素的含量分析.微量元素与健康研究,2003,20(2):42-44
    [59]朱加叶,乙小娟,丁晓峰.微波消化石-墨炉原子吸收分光光度法测定进口西洋参中的铅.光谱学与光谱分析,2003,23(2):380-382
    [60]陈世忠.石墨炉原子吸收光谱法测定中药黄姜中微量隔的研究.光谱学与光谱分析,2003,23(5):993-994
    [61]戴益华,邓世林,李新凤.流动注射-冷原子吸收法测定中药中的微量汞.微量元素与健康研究,2003,20(1):41-42
    [62]姚素梅,王强.六种常用滋补中药铅、汞、镉含量的测定.广东微量元素科学,2006,13(3):50-52
    [63]张晖芬,赵春杰,金成宇,等.氢化物发生-原子吸收法测定补益类药材中痕量铅、砷、汞.中国药学杂志,2004,39(4):296-297
    [64]王爱平.一次微波消解原子荧光法测定中药材砷铅汞的含量.现代中药研究与实践,2003,17(1):26-28
    [65]龚雪云,石杰,宋庆国,等.氢化物发生-原子荧光法测定菊花和大云中的铅.郑州大学学报(理学版),2003,35(4):84-86
    [66]石杰,朱永琴,龚雪云.氢化物发生-原子荧光法测定中药中痕量汞.光谱学与光谱分析,2004,24(7):893-895
    [67]李凤,廖振环,丁健华,等.中草药中多种微量元素的ICP-AES同时测定研究.光谱学与光谱分析,2000,20(1):58-60
    [68]郝南明,田洪,苟丽.三七生长初期不同部位重金属元素含量测定.微量元素与健康研究,2004,21(5):27-28
    [69]扈健,杨昆.不同产地山茱萸中微量重金属元素的含量测定.职业与健康,2005,21(12):1944-1946
    [70]夏斌锋,卢祖庆,王欣美,等.ICP-MS法测定中药材中5种有害元素方法的研究.现代仪器,2004,(1):17-19
    [71]王柯,王欣美,季申.ICP-MS法测定中药材中13种元素.中国药学杂志,2005,40(15):1184-1187
    [72]温慧敏,陈晓辉,董婷霞,等.ICP-MS法测定4种中药材中重金属含量.中国中药杂志,2006,31(16):1314-1317
    [73]张彤,徐莲英,蔡贞贞.壳聚糖澄清剂对中药水提液中锌、锰、钙及重金属元素铅的影响.中成药,2001,23(4):243
    [74]潘育方,黄丹莹.壳聚糖去除中药水煎液中重金属的初探.化工时刊,2005,19(11):27-28
    [75]程红霞,林强.壳聚糖对中药水提液中重金属残留的吸附特性研究.北京联合大学学报自然科学版,2006,20(1):69
    [76]王先良,王小利,徐顺清.大孔螯合树脂可用于处理中药重金属污染.中成药,2005,27(12):1376-1379
    [77]赵春杰,张晖芬,陈静,等.黄芪中重金属超临界CO_2净化技术研究.沈阳药科大学学报,2004,21(5):381-384
    [78]党志,朱志鑫,文震,等.超临界CO_2配合萃取中药广藿香中的重金属.华南理工大学学报(自然科学版),2005,33(6):59-62
    [79]张晖芬,赵春杰.淫羊藿中重金属超临界CO_2流体净化技术研究.中南药学,2005,3(5):259-261
    [80]Pethkar AV,Gaikaiwari RP,Paknikar KM.Biosorptive removal of contaminating heavy metals from plant extracts of medicinal value.Curt Sci,2001,80(9):1216
    [81]陆宇照,龚跃刚,王兴文,等.中药提取物中重金属的研究.云南中医学院学报.2001,24(1):1-2,8
    [82]Jain CK,All I.Arsenic:occurrence,toxicity and speciation techniques.Water Res,2000,34(17):4304
    [83]Caussy D.Case study of the impact of understanding bioavailabihty:arsenic.Ecotoxicol Environ Saf,2003,56(1):164
    [84]Clarkson TW,Magos L.The toxicity of mercury and its chemical compounds.Crit Rev Toxicol,2006,6(8):609
    [85]潘静娴,戴锡玲,陆勐俊.蒌蒿重金属富集特征与食用安全性研究.中国蔬菜,2006,1:6
    [86]钱华,王衍彬.中药材不同吸收特性对土壤重金属含量标准要求的变化.中国现代中药,2006,8(11):34-36
    [87]田伟,谢晓亮,温春秀,等.黄芩对土壤中重金属吸收规律的研究.河北林果研究,2007,22(1):15-18
    [88]Viorica Alexiu,Elena Chirtop,Luminita Vladescu.Determination of mercury in pharmaceuticals by graphite furnace atomic absorption spectrometry with chemical modifier.Acta Chim.Slov,2004,51:361
    [89]郭丹,杨西晓,侯连兵.冷原子吸收光谱法测定常通口服液中重金属汞的含量. 中国药业,2005,14(4):35-36
    [90]汪芸.原子荧光光谱法测定中药材砷、汞的含量.中药材,2004,27(12):918-919
    [91]缪恩铭,张艳红,王森,等.用电感耦合等离子体质谱法测定中草药中的重金属元素.分析测试学报,2007,26(8):184-186
    [92]王苏斌,郑海涛,邵谦谦,等.SPSS统计分析.北京:机械工业出版社,2003:423
    [93]中华人民共和国国家标准GB 9834-88.土壤有机质测定法.北京:中国标准出版社,1988
    [94]中华人民共和国农业行业标准NY/T 1121.2-2006.土壤检测(第2部分:土壤pH值的测定).北京:中国标准出版社,2006
    [95]中华人民共和国国家标准GB 15618-1995.土壤环境质量标准.北京:中国标准出版社,1995