设防烈度地震设计的双层球面网壳抗震性能分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
考察了双层球面网壳按设防烈度进行抗震设计的合理性。以24个典型双层球面网壳模型为算例,将其构件截面分别按满足"小震弹性"、"中震不屈服"和"中震弹性"进行验算,分析了网壳用钢量的变化。进一步对满足中震验算的各算例模型进行罕遇地震下的弹塑性时程分析,其中地震动采用由规范反应谱生成的三向人工波。考察了网壳跨度、矢跨比、支座连接条件以及下部结构形式对结构塑性区域、塑性发展程度以及残余变形的影响。结果表明,即便是将双层球面网壳的构件截面验算提高到满足"中震弹性"的性能水平,也并不会引起结构用钢量的显著增加,同时又能满足了"中震可修"和"大震不倒"的设防要求。
The rationality is investigated for double-layer spherical reticulated shells which are designed on the basis of seismic precautionary intensity.The 24 typical double-layer spherical reticulated shell models are employed as illustrative examples.The cross sections of their members are designated to be satisfied with the check for "elastic design under frequent-occurred earthquake","non-yielding design under seismic precautionary intensity" and "elastic design under seismic precautionary intensity"respectively,and structural steel consumptions are compared correspondingly.For those models satisfied with the check seismic precautionary intensity,their elasto-plastic dynamic responses under seldom occurred earthquake are also calculated based on time-history analysis.A three-direction artificial earthquake wave generated according to the code response spectrum is adopted.The structural plastic region,magnitude of plastic strain and residual deformation effected by the span of shell,rise-span ratio,connection condition of abutment and layout of substructure are further analyzed.The results reveal that the structural steel consumption increases very limitedly even though the member cross sections of double-layer reticulated shells are checked according to the performance level of "elastic design under seismic precautionary intensity".Meanwhile,the fortification requirements of "repairable under moderate earthquake" and "no collapsing under seldom occurred earthquake" are also satisfied.
引文
[1]董石麟,罗尧治,赵阳.新型空间结构分析、设计与施工[M].北京:人民交通出版社,2006.
    [2]刘河江,邓华.罕遇地震下双层球面网壳的弹塑性动力响应分析[J].振动与冲击,2012,31(24):170-177.
    [3]GB50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
    [4]周颖,吕西林.中震弹性设计与中震不屈服设计的理解及实施[J].结构工程师,2008,24(6):1-12.
    [5]GB50009—2001建筑结构荷载规范[S].北京:中国建筑工业出版社,2006.
    [6]黄旭乐.网格结构多维地震响应计算方法的对比研究[D].杭州:浙江大学,2011.
    [7]谢道清,沈金,邓华,等.考虑受压屈曲的圆钢管杆单元等效弹塑性滞回模型[J].振动与冲击,2012,31(6):160-165.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心