引文
[1]FEMA 273 NEHRP guidelines and commentary for seismic rehabilitation of buildings[S].Washington DC,USA:Federal Emergency Management Agency,1997.
[2]FEMA 356 Prestandard and commentary for the seismic rehabilitation of buildings[S].Washington DC,USA:Federal Emergency Management Agency,2000.
[3]FEMA 445 Next-generation performance-based seismic design guidelines:program plan for new and existing buildings[S].Washington DC,USA:Federal Emergency Management Agency,2007.
[4]Report of the seventh joint planning meeting of NEES/E-defense collaborative research on earthquake engineering[R].PEER 2010/109.Berkeley:University of California,Berkeley,2010.
[5]JGJ 3-2010,高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2010.
[6]Kurama Y,Pessiki S,Sause R Lu,et al.Analytical modeling andlateral load behavior of unbonded post-tensioned precast concrete Walls[R].No.EQ-96-02,Department of Civil and Environmental Engineering,Lehigh University,Bethlehem,PA,191 pp.1996.
[7]Kurama Y C,Sause R,Pessiki S,et al.Seismic design and response evaluation of unbonded post-tensioned precast concrete walls[R].No.EQ-97-01,Department of Civil and Environmental Engineering,Lehigh University,184pp.1997.
[8]Kurama Y C,Sause R,Pessiki S,et al.Lateral load behavior and seismic design of unbonded post-tensioned precast concrete walls[J].ACI Structural Journal,1999,96(4):622-633.
[9]Kurama Y C.Seismic design of unbonded post-tensioned precast concrete walls with supplemental viscous damping[J].ACI Structural Journal,2000,97(4):648-658.
[10]Kurama Y C,Sause R,Pessiki S,et al.Seismic response evaluation of unbonded post-tensioned precast walls[J].ACI Structural Journal,2002,99(5):641-651.
[11]Holden T,Restrepo J,John B.et al.Seismic performance of precast reinforced and prestressed concrete walls[J].Journal of Structural Engineering,2003,129(3):286-296.
[12]Perez F J,Pessiki S,Sause R.Experimental and analytical lateral load response of unbonded post tensioned precast concrete walls.Center for Advanced Technology for Large Structural Systems(ATLSS)[R].No.04-11,Lehigh Univ,Bethlehem,Pa.2004.
[13]Perez F J,Sause R,Pessiki S.Analytical and experimental lateral load behavior of unbonded posttensioned precast concrete walls[J]Journal of Structural Engineering,2007,133(11):1531-1540.
[14]Restrepo J I,Rahman A.Seismic performance of self-centering structural walls incorporating energy dissipaters[J].Journal of Structural Engineering,2007,133(11):1560-1570.
[15]Smith B J,Asce S M,Kurama Y C,et al.Design and measured behavior of a hybrid precast concrete wall specimen for seismic regions[J].Journal of Structural Engineering,2011,137(10):1052-1062.
[16]Smith B J,Kurama Y C,Mc Ginnis M J,et al.Behavior of precast concrete shear walls for seismic regions:comparison of hybrid and emulative specimens[J].Journal of Structural Engineering,2013,139(11):1917-1927.
[17]Sritharan S,Aaleti S,Thomas D.Seismic analysis and design of precast concrete jointed wall systems[R].ISU-ERI-Ames Report ERI-07404,2007.
[18]Marriott D,Pampanin S,Bull D,et al.Dynamic testing of precast,post-tensioned rocking wall systems with alternative dissipating solutions[C]//Bulletin of the New Zealand Society for Earthquake Engineering 2008,41(2):90-103.
[19]Panian L,Steyer M,Tipping S.Post-Tensioned concrete walls for seismic resistance[J].Journal of the Post-tersioning Ingtitute,2007,5(1):7-12.
[20]Panian L,Steyer M,Tipping S.Post-Tensioned shotcrete shearwalls[C]//Concrete International,October 2007,Vol.29,number 10,American Concrete Institute,Farmington Hills,Michigan.
[21]Stevenson M,Panian L,Korolyk M,et al.Post-tensioned concrete walls and frames for seismic-resistance-a case study of the david brower center[C]//SEAOC.SEAoc 2008 Convention Pro-ceedings.Berkeley:SEAOC,2008:1-8.
[22]Clayton P M.Self-centering steel plate shear walls:Development of design procedure and evaluation of seismic performance[D].Seattle,WA:University.of Washington,Deptment of Civil and Environmental Engineering,2010.
[23]Winkley T B.Self-centering steel plate shear walls.Large scale experimental investigation[D].Seattle,WA:University of Washington,Deptment.of Civil and Environmental Engineering,2011.
[24]Clayton P M,Winkley T B,Berman J W,et al.Experimental investigation of self-centering steel plate shear walls[J].Journal of Structural Engineering,2012,138(7):952-960.
[25]Dowden D M,Purba R,Bruneau M.Behavior of self-centering steel Plate shear walls and design considerations[J].Journal of Structural Engineering,2012,138(1):11-21.
[26]Wight G D,Ingham J M,Kowalsky M J.Shake table testing of rectangular post tensioned concrete masonry walls[J].Aci Structural Journal,2006 1034,587-595.
[27]Wight G D,Kowalsky M J,Asce M,et al.Shake table testing of posttensioned concrete masonry walls with openings[J].Journal of structural Engineering,2007,133(11):1551-1559.
[28]Devereux C P,Holden T J,Buchanan A H,et al.NMIT arts&media building-damage mitigation using post-tensioned timber walls[C]//9th Pacific Conference on Earthquake Engineering,Auckland,New Zealand,2011.
[29]Rahman A,Sritharan S.An evaluation of force-based design vs.direct displacement-based design of jointed precast posttensioned wall systems[J].Earthquake Engineering and Engineering Vibration,2006,5(2),285-296.
[30]Pennucci D.Displacement-based design of precast walls with additional dampers[D].Italy,European School for Advanced Studies in Reduction of Seismic Risk(ROSE School),University of Pavia,2008.
[31]Pennucci D,Calvi G M,Sullivan T J.Displacement-based design of precast walls with additional dampers[J].Journal of Earthquake Engineering,2009,13(S1):40-65.
[32]Aaleti S,Sritharan S.A simplified analysis method for characterizing unbonded post-tensioned precast wall systems[J].Engineering Structures,2009,31(12):2966-2975.
[33]Erkmen B,Schultz A E.Self-centering behavior of unbonded post-tensioned precast concrete shear walls[J].Journal of Earthquake Engineering,2009,13(7):1047-1064.
[34]Twigden K M,Henry R S,Ma Q T.Dynamic testing of posttensioned rocking walls[C]//15th World Conference on Earthquake Engineering.Lisbon,Portugal:2012.
[35]陈适才,闰维明,李振宝,等.底部开缝预应力剪力墙结构力学性能的有限元分析[J].防灾减灾工程学报,2010,30(6):631-636.CHEN Shi-cai,YAN Wei-ming,LI Zhen-bao,et al.Finite elemet study on mechanical behavior of the post-tensioned rocking shear walls with bottom Slits[J].Journal of Disastor Prevention and Mitigation Engineering,2010,30(6):631-636.
[36]马昕,吕西林.软钢阻尼器对自复位剪力墙性能影响研究[J].结构工程师,2013,29(4):63-69.MA Xin,LXi-lin.Effects of the mild steel damper on the self-centering wall performance[J].Structural Engineers,2013,29(4):63-69.
[37]吴浩,吕西林.无粘结后张拉预制剪力墙抗震性能模拟分析[J].振动与冲击,2013,32(19):176-182.WU Hao,LXi-lin.Numerical simulation on seismic performance of unbonded post-tensioned precast shear walls[J].Journal of Vibration and Shock,2013,32(19):176-182.
[38]GUO Tong,ZHANG Guo-dong,CHEN Cheng.Experimental study on self-centering concrete wall with distributed friction devices[J].Journal of Earthquake Engineering,2013,18(2):214-230.
[39]Anderson D L.Effect of foundation rocking on the seismic response of shear walls[J].Canadian Journal of Civil Engineering,2003,30(2):360-365.
[40]Gajan S,Kutter B L.Capacity,settlement,and energy dissipation of shallow footings subjected to rocking[J].Journal of Geotechnical and Geoenvironmental Engineering,2008,134(8):1129-1141.
[41]Gajan S.Physical and numerical modeling of nonlinear cyclic load-deformation behavior of shallow foundations supporting rocking shear walls[D].Davis,Calif,Dept.of Civil and Environmental Engineering,Univ.of California,2006.
[42]Gajan S,Kutter B L.Effects of moment-to-shear ratio on combined cyclic load-displacement behavior of shallow foundationsfrom centrifuge experiments[J].Journal of Geotechnical and Geoenvironmental Engineering,2009,135(8):1044-1055.
[43]Ajrab J J,Pekcan G,Mander J B,et al.Rocking wall-frame structures with supplemental tendon systems[J].Journal of Structural Engineering,2004,130(6):895-903.
[44]Lu Y.Inelastic behaviour of RC wall-frame with a rocking wall and its analysis incorporating 3-D effects[J].Structural Design of Tall and Special Buildings,2005,14(1):15-35.
[45]Hitaka T,Sakino K.Cyclic tests on a hybrid coupled wall utilizing a rocking mechanism[J].Earthquake Engineering and Structural Dynamics,2008,37(14):1657-1676.
[46]Wiebe L,Christopoulos C.Mitigation of higher mode effects in base-rocking systems by using multiple rocking sections[J].Journal of Earthquake Engineering,2009,13(S1):83-108.
[47]Mulligan K J,Chase J G,Mander J B,et al.Hybrid experimental analysis of semi-active rocking wall systems[C]//Proceedings of New Zealand Society of Earthquake Engineering(NZSEE).Napier,New Zealand:2006.
[48]Marriott D,Pampanin S,Bull D.Improving the seismic performance of existing reinforced concrete buildings using advanced rocking wall solutions[C]//Proceedings of New Zealand Society of Earthquake Engineering(NZSEE).Palmerston North,New Zealand,2007.
[49]Wada A,Qu Z,Ito H,et al.Seismic retrofit using rocking walls and steel dampers[C]//Proceedings of ATC/SEI Conference on Improving the Seismic Performance of Existing Buildings and Other Structures.San Francisco.CA,USA:Applied Technology Council,2009.
[50]Toranzo L A,Carr A J,Restrepo J I.Displacement based design of rocking walls incorporating hysteretic energy dissipators[C]//Proc,7th Int.Seminar on Seismic,Passive Energy Dissipation and Active Control of Vibration of Structures,2001.
[51]Toranzo L A.The use of rocking walls in confined masonry structures:a performance-based approach[D].New Zealand:Department of Civil Engineering,University of Canterbury,2002.
[52]Toranzo L A,Restrepo J I,Mander J B,et al.Shake-table tsts of confined-masonry rocking walls with supplementary hysteretic damping[J].Journal of Earthquake Engineering,2009,13(6):882-898.
[53]Loo W Y,Quenneville P,Chouw N.A numerical study of the seismic behaviour of timber shear walls with slip-friction connectors[J].Journal of Structural Engineering,2012,34(11):233-243.
[54]曲哲,叶列平.摇摆墙-框架体系的抗震损伤机制控制研究[J].地震工程与工程振动,2011,31(4):40-50.QU Zhe,YE Lie-ping.Seismic damage mechanism control of rocking wall-frame system[J].Journal of Earthquake Engineering and Engineering Vibration,2011,31(4):40-50.
[55]曲哲,和田章,叶列平.摇摆墙在框架结构抗震加固中的应用[J].建筑结构学报,2011,32(9):11-19.QU Zhe,WADA Akira,YE Lie-ping.Seismic retrofit of frame structures using rocking wall system[J].Journal of Building Structures,2011,32(9):11-19.
[56]曹海韵,潘鹏,叶列平.基于推覆分析混凝土框架摇摆墙结构抗震性能研究[J].振动与冲击,2011,30(11):240-244.CAO Hai-yun,PAN Peng,YE Lie-ping.Pushover analysis of RC frame rocking wall structure[J].Journal of Vibration and Shock,2011,30(11):240-244.
[57]曹海韵,潘鹏,吴守君,等.框架-摇摆墙结构体系中连接节点试验研究[J].建筑结构学报,2012,33(12):38-46.CAO Hai-yun,PAN Peng,WU Shou-jun,et al.Experimental study of connections of frame-rocking wall system[J].Journal of Building Structures,2012,33(12):38-46.
[58]裴星洙,王佩.混凝土框架-摇摆墙体系抗震性能研究[J].工程抗震与加固改造,2013,35(2):19-28.PEI Xing-zhu,WANG Pei.Study on seismic property of RC frame rocking wall[J].Earthquake Resistant Engineering and Retrofitting,2013,35(2):19-28.
[59]吕西林,周颖,陈云.一种可更换脚部构件的新型剪力墙[P].中国,ZL 2010 2 0107221.6.2010-12-22.
[60]吕西林,陈云,毛苑君.结构抗震设计的新概念-可恢复功能结构[J].同济大学学报,2011,39(7):941-948.LXi-lin CHEN Yun,MAO Yuan-jun.New concept of structural seismic design:earthquake resilient structures[J].Journal of Tongji University(Natural Science),2011,39(7):941-948.
[61]吕西林,毛苑君.带有可更换脚部构件剪力墙的设计方法[J].结构工程师,2012,28(3):12-17.LU Xi-lin,MAO Yuan-jun.Design method for RC shear walls with replaceable foot parts[J].Structural Engineers,2012,28(3):12-17.
[62]L Xi-lin,MAO Yuan-jun,CHEN Yun.Test and analysis on shear walls with replaceable devices under cyclic loading for earthquake resilient structures[C]//9th CUEE and 4th ACEE Joint Conference.Tokyo:2012.
[63]L Xi-lin,MAO Yuan-jun,CHEN Yun,et al.New structural system for earthquake resilient design[J].Journal of Earthquake and Tsunami,2013,7(3):1350013.