Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy

详细信息    查看全文

• 作者：Jithin Joseph^a ; ^{jithin@deakin.edu.au} ; Nicole Stanford^b ; Peter Hodgson^a ; Daniel Mark Fabijanic^a
• 关键词：High entropy alloy ; Twinning ; Work hardening ; Critical resolved shear stress for twinning
• 刊名：Scripta Materialia
• 出版年：2017
• 出版时间：1 March 2017
• 年：2017
• 卷：129
• 期：Complete
• 页码：30-34
• 全文大小：1197 K
• 卷排序：129

文摘

The high entropy alloy, Al0.3CoCrFeNi, has been fabricated by direct laser fabrication and its deformation behaviour studied. This alloy exhibited significant tension/compression asymmetry in its work hardening rate and ductility. The exceptionally high work hardening in compression has been attributed to profuse mechanical twinning which has been exacerbated by a strong texture in the as-cast material. The tensile deformed material did not exhibit any mechanical twinning, deformed exclusively by slip, and therefore showed minimal work hardening and poor ductility. The critical resolved shear stress for twinning of the alloy was found to be approximately 240 MPa.