Study on the influence of SDS and THF on hydrate-based gas separation performance

详细信息    查看全文

• 作者：Jianfeng Tang ; Dalong Zeng ; Chuanlei Wang ; Yuliang Chen ; Limin He ; Na Cai
• 关键词：Hydrate-based gas separation ; SDS ; THF ; CO2 capture
• 刊名：Chemical Engineering Research and Design
• 出版年：2013
• 出版时间：September, 2013
• 年：2013
• 卷：91
• 期：9
• 页码：1777-1782
• 全文大小：993 K

文摘

Hydrate additives can be used to mitigate hydrate formation conditions, promote hydrate growth rate and improve separation efficiency. CO₂ + N₂ and CO₂ + CH₄ systems with presence of sodium dodecyl sulfate (SDS) or tetrahydrofuran (THF) are studied to analyze the effect of hydrate additives on gas separation performance. The experiment results show that CO₂ can be selectively enriched in the hydrate phase. SDS can speed up the hydrate growth rate by facilitating gas molecules solubilization. When SDS concentration increases, split and loss fraction increase initially and then decrease slightly, resulting in a decreased separation factor. The optimum concentration of SDS exists at the range of 100-300 ppm. As THF can be easily encaged in hydrate cavities, hydrate formation condition can be mitigated greatly with its existence. Additionally, THF can also strengthen hydrate formation. The THF effect on separation performance is related to feed gas components. CO₂ occupies the small cavities of type II hydrate prior to N₂. But the competitiveness of CO₂ and CH₄ to occupy cavities are quite fair. The variations of split fraction, loss fraction and separation factor depend on the concentration of THF added. The work in this paper has a positive role in flue gas CO₂ capture and natural gas de-acidification.