Polyethyleneimine High-Energy Hydrophilic Surface Interfacial Treatment toward Efficient and Stable Perovskite Solar Cells

详细信息    查看全文

• 作者：Pengwei Li ; Chao Liang ; Yiqiang Zhang ; Fengyu Li ; Yanlin Song ; Guosheng Shao
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：November 30, 2016
• 年：2016
• 卷：8
• 期：47
• 页码：32574-32580
• 全文大小：409K
• ISSN：1944-8252

文摘

The interfacial contact is critical for the performance of perovskite solar cells (PSCs), leading to dense perovskite thin films and efficient charge transport. In this contribution, an effective interfacial treatment solution using polyethyleneimine (PEI) was developed to improve the performance and stability of PSCs. Inserting PEI between the s-VO_x and perovskite layers can produce a high-energy hydrophilic surface to facilitate the formation of a high-quality perovskite layer by the solution method. Accordingly, the surface coverage of perovskite film on the s-VO_x layer increased from 80% to 95%, and the PCE of the device improved from 12.06% (with an average of 10.16%) to 14.4% (with an average value of 12.8%) under an irradiance of 100 mW cm^–2 AM 1.5G sunlight. More importantly, the stability of PSCs was further improved after adding another PEI layer between the electron transport layer and LiF/Al layer, less than 10% decay in efficiency during a 10-days observation. Since all layers of the PSCs were fabricated at low temperature (<150 °C), these PEI-treated PSCs based on the amorphous VO_x layer have the potential to contribute significantly toward the development of efficient and stable solar cells on flexible substrates.