Estimation of Heat Transfer Coefficients for Biomass Particles by Direct Numerical Simulation Using Microstructured Particle Models in the Laminar Regime
详细信息 查看全文
- 作者：M. Brennan Pecha ; Manuel Garcia-Perez ; Thomas D. Foust ; Peter N. Ciesielski
- 刊名：ACS Sustainable Chemistry & Engineering
- 出版年：2017
- 出版时间：January 3, 2017
- 年：2017
- 卷：5
- 期：1
- 页码：1046-1053
- 全文大小：457K
- ISSN：2168-0485
文摘
Direct numerical simulation of convective heat transfer from hot gas to isolated biomass particle models with realistic morphology and explicit microstructure was performed over a range of conditions in the laminar regime. Steady-state results demonstrated that convective interfacial heat transfer is dependent on the wood species. The computed heat transfer coefficients were shown to vary between the pine and aspen models by nearly 20%. These differences are attributed to the species-specific variations in the exterior surface morphology of the biomass particles. We also quantify variations in heat transfer experienced by the particle when positioned in different orientations with respect to the direction of fluid flow. These results are compared to previously reported heat transfer coefficient correlations in the range of 0.1 < Pr < 1.5 and 10 < Re < 500. Comparison of these simulation results to correlations commonly used in the literature (Gunn, Ranz–Marshall, and Bird–Stewart–Lightfoot) shows that the Ranz–Marshall (sphere) correlation gave the closest h values to our steady-state simulations for both wood species, though no existing correlation was within 20% of both species at all conditions studied. In general, this work exemplifies the fact that all biomass feedstocks are not created equal, and that their species-specific characteristics must be appreciated in order to facilitate accurate simulations of conversion processes.