Nonlinear Surface Dilatational Rheology and Foaming Behavior of Protein and Protein Fibrillar Aggregates in the Presence of Natural Surfactant
详细信息 查看全文
- 作者：Zhili Wan ; Xiaoquan Yang ; Leonard M. C. Sagis
- 刊名：Langmuir
- 出版年：2016
- 出版时间：April 19, 2016
- 年：2016
- 卷：32
- 期：15
- 页码：3679-3690
- 全文大小：647K
- 年卷期：0
- ISSN：1520-5827
文摘
The surface and foaming properties of native soy glycinin (11S) and its heat-induced fibrillar aggregates, in the presence of natural surfactant steviol glycoside (STE), were investigated and compared at pH 7.0 to determine the impact of protein structure modification on protein–surfactant interfacial interactions. The adsorption at, and nonlinear dilatational rheological behavior of, the air–water interface were studied by combining drop shape analysis tensiometry, ellipsometry, and large-amplitude oscillatory dilatational rheology. Lissajous plots of surface pressure versus deformation were used to analyze the surface rheological response in terms of interfacial microstructure. The heat treatment generates a mixture of long fibrils and unconverted peptides. The presence of small peptides in 11S fibril samples resulted in a faster adsorption kinetics than that of native 11S. The addition of STE affected the adsorption of 11S significantly, whereas no apparent effect on the adsorption of the 11S fibril–peptide system was observed. The rheological response of interfaces stabilized by 11S–STE mixtures also differed significantly from the response for 11S fibril–peptide–STE mixtures. For 11S, the STE reduces the degree of strain hardening in extension and increases strain hardening in compression, suggesting the interfacial structure may change from a surface gel to a mixed phase of protein patches and STE domains. The foams generated from the mixtures displayed comparable foam stability to that of pure 11S. For 11S fibril–peptide mixtures STE only significantly affects the response in extension, where the degree of strain softening is decreased compared to the pure fibril–peptide system. The foam stability of the fibril–peptide system was significantly reduced by STE. These findings indicate that fibrillization of globular proteins could be a potential strategy to modify the complex surface and foaming behaviors of protein–surfactant mixtures.