Impact of Porosity and Electrolyte Composition on the Surface Charge of Hydroxyapatite Biomaterials

详细信息    查看全文

• 作者：Montserrat Espanol ; Gemma Mestres ; Thomas Luxbacher ; Jean-Baptiste Dory ; Maria-Pau Ginebra
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：January 13, 2016
• 年：2016
• 卷：8
• 期：1
• 页码：908-917
• 全文大小：620K
• ISSN：1944-8252

文摘

The success or failure of a material when implanted in the body is greatly determined by the surface properties of the material and the host tissue reactions. The very first event that takes place after implantation is the interaction of soluble ions, molecules and proteins from the biological environment with the material surface leading to the formation of an adsorbed protein layer that will later influence cell attachment. In this context, the particular topography and surface charge of a material become critical as they influence the nature of the proteins that will adsorb. However, very limited information is available on the surface charge of porous substrates. Only until very recently was the determination of the zeta potential on porous membranes accurately determined. The goal of this work was to implement the previous findings for the determination of the zeta potential of a series of porous hydroxyapatite (HA) substrates and to assess how porosity affects the measurements. In addition, studies using various electrolytes were also performed to prove how the specific affinity of certain ions for HA can further impact surface charge. The results showed that all materials exhibited very similar external surface charge (approximately ?23 mV), consistent with their almost identical topographies. However, the presence of interconnected pores underneath the sample surface resulted in an additional internal zeta potential that varied with the porosity content. Measurements with different electrolytes confirmed the selectivity of divalent ions for HA underlying the importance of testing biomaterials using relevant electrolytes.