Amino-Functionalized Ceramic Capillary Membranes for Controlled Virus Retention

详细信息    查看全文

• 作者：Julia Bartels ; Marina N. Souza ; Amelie Schaper ; Pál Árki ; Stephen Kroll ; Kurosch Rezwan
• 刊名：Environmental Science & Technology
• 出版年：2016
• 出版时间：February 16, 2016
• 年：2016
• 卷：50
• 期：4
• 页码：1973-1981
• 全文大小：415K
• ISSN：1520-5851

文摘

A straightforward chemical functionalization strategy using aminosilanes for high-flux yttria-stabilized zirconia capillary membranes is presented (macroporous, d₅₀ = 144 nm, open porosity =49%, membrane flux ∼150 L/(m²hbar)). Three different aminosilanes with one, two or three amino groups per silane molecule, namely 3-aminopropyltriethoxysilane (APTES), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AE-APTES) and N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA), are used to generate the amino-functionalized membranes. With a higher number of amino groups per silane molecule increased loading capacities between 0.44 and 1.01 accessible amino groups/nm² membrane are achieved. Streaming potential measurements confirm that the zeta-potential of the membrane surface is converted from negative (non-functionalized) to positive (amino-functionalized). By operation in dead-end filtration mode using the model virus MS2 (diameter = 25 nm, IEP = 3.9) the virus retention capacity of the amino-functionalized membranes is significantly increased and log reduction values (LRVs) of up to 9.6 ± 0.3 (TPDA) are obtained whereas a LRV < 0.3 is provided by the non-functionalized membranes. Long-term dead-end filtration experiments for 1 week reveal a high stability of immobilized aminosilanes (TPDA), being robust against leaching. By iterative backflushing with desorption buffer MS2-loaded membranes are successfully regenerated being reusable for a new filtration cycle. The presented functionalization platform is highly promising for controlled virus retention.