Amphiphobic Polytetrafluoroethylene Membranes for Efficient Organic Aerosol Removal

详细信息    查看全文

• 作者：Shasha Feng ; Zhaoxiang Zhong ; Feng Zhang ; Yong Wang ; Weihong Xing
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：April 6, 2016
• 年：2016
• 卷：8
• 期：13
• 页码：8773-8781
• 全文大小：566K
• ISSN：1944-8252

文摘

Polytetrafluoroethylene (PTFE) membrane is an extensively used air filter, but its oleophilicity leads to severe fouling of the membrane surface due to organic aerosol deposition. Herein, we report the fabrication of a new amphiphobic 1H,1H,2H,2H-perfluorodecyl acrylate (PFDAE)-grafted ZnO@PTFE membrane with enhanced antifouling functionality and high removal efficiency. We use atomic-layer deposition (ALD) to uniformly coat a layer of nanosized ZnO particles onto porous PTFE matrix to increase surface area and then subsequently graft PFDAE with plasma. Consequently, the membrane surface showed both superhydrophobicity and oleophobicity with a water contact angle (WCA) and an oil contact angle (OCA) of 150° and 125°, respectively. The membrane air permeation rate of 513 (m³ m^–2 h^–1 kPa^–1) was lower than the pristine membrane rate of 550 (m³ m^–2 h^–1 kPa^–1), which indicates the surface modification slightly decreased the membrane air permeation. Significantly, the filtration resistance of this amphiphobic membrane to the oil aerosol system was much lower than the initial one. Moreover, the filter exhibited exceptional organic aerosol removal efficiencies that were greater than 99.5%. These results make the amphiphobic PTFE membranes very promising for organic aerosol-laden air-filtration applications.