用户名: 密码: 验证码:
Formation of metastable cubic-perovskite in high-p
详细信息   在线全文   PDF全文下载
摘要

We have carried out in-situ X-ray diffraction experiments on high-pressure transformations of a Ca- and Fe- rich pyroxene (Ca1.03Mg0.61Fe0.23Al0.14Si2O6) to investigate the stability of Ca0.5(Mg, Fe, Al)0.5SiO3 perovskite (CM-perovskite) in a multi component system at about 32 GPa and up to 1900 °C. We observed that cubic CM-perovskite was formed at about 1300 °C and decomposed into cubic Ca-perovskites and orthorhombic Mg-perovskites and stishovite at 1800 °C when using a glass starting material. In another experiment using a crystalline pyroxene starting material, two cubic perovskites; Ca-perovskite and CM-perovskite, and orthorhombic Mg-perovskite formed simultaneously during the initial stage of the transformation. However, the cubic CM-perovskite subsequently decomposed into Mg- and Ca-perovskites and stishovite at 1200 °C. These results indicate that the assembly of cubic Ca-perovskite, orthorhombic Mg-perovskite and stishovite is stable and cubic CM-perovskite is a metastable phase at around 32 GPa and temperatures over 1000 °C in this system. Chemical analyses of product phases showed that Mg, Fe, and Al were preferentially partitioned into Mg-perovskite and the compositions of Ca-perovskite were close to pure CaSiO3. The present study shows that CM-perovskite nucleates during the initial stage of Ca(Mg, Fe, Al)Si2O6 pyroxene transformation. Therefore, cold subducting slabs and impacted meteorites are the possible places in which CM-perovskite could exist. The Ca-rich glassy phase in a shocked chondrite (Tomioka and Kimura 2003) might have formed by vitrification of a metastable CM-perovskite-like phase.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700