AC loss reduction of TFA-MOD coated conductors in long length by laser scribing technique

详细信息	查看全文 | 推荐本文 |

• 作者：K. Katayama^a ; ^{katayama.kota@istec.or.jp} ; H. Hirano^a ; ^b ; T. Machi^a ; Y. Takagi^a ; Y. Takahashi^a ; T. Izumi^a
• 关键词：YBCO ; TFA-MOD ; Delamination strength ; AC loss
• 刊名：Physics Procedia
• 出版年：2012
• 期刊代码：P128_18753892
• 类别：ph
• 出版时间：2012
• 卷：27
• 期：Complete
• 页码：208-211
• 文件大小：724 K

摘要

TFA-MOD process is expected to be promising for future applications since it can produce high performance YBCO coated conductors with low cost. Applying YBCO coated conductors to the power electric devices such as transformer, cable, motors, reduction of AC loss for long wire is necessary. Multifilamentation, which is one of the effective approaches for AC loss reduction, has been developed by the scribing process. YBCO coated conductors produced by our standard TFA-MOD process delaminated into two parts by the laser scribing. The delamination was clarified to occur within the superconducting layer caused by the defects such as pores in the superconducting layer. In order to reduce the defects in the superconducting layer, we modify the heat treatment profile performed on the decomposed precursor films by applying the interim annealing(550-600掳C) before crystallization heat treatment(740-770掳C). The interim annealed samples had much less and smaller pores than the standard processed ones. The peel strength measured by transverse tensile test was as high as the PLD derived coated conductors which was successfully scribed into five filaments resulting in 1/5 AC loss. A 50m long YBCO coated conductor with the characteristics of 398A/cmwidth was obtained and cut into 5 mm width, followed by the laser scribing process into five filaments. The multifilamentation process was successfully performed without delamination throughout the wire. The hysteresis loss was down to 1/N (N: number of filaments), as we aimed. The IC properties of the filaments were 29卤4A, indicating the wire was uniformly fabricated.