Mechanochemical preparation and characterization of CaO路ZnO used as catalyst for biodiesel synthesis

详细信息	查看全文 | 推荐本文 |

• 作者：沤eljka Kesi膰^a ; Ivana Luki膰^a ; Dragana Brki膰^a ; Jelena Rogan^a ; Miodrag Zduji膰^b ; Hui Liu^c ; Dejan Skala^a ; ^{skala@tmf.bg.ac.rs}
• 关键词：Biodiesel ; Heterogeneous catalyst ; Methanolysis ; CaO ; ZnO
• 刊名：Applied Catalysis A ; General
• 出版年：2012
• 期刊代码：4_0926860x
• 类别：ch
• 出版时间：15 June, 2012
• 卷：427-428
• 期：Complete
• 页码：58-65
• 文件大小：766 K

摘要

In this study, the synthesis of biodiesel or fatty acid methyl esters (FAME) from sunflower oil and methanol using CaO路ZnO catalyst was investigated. Catalyst was synthesized by ball milling of Ca(OH)₂ and ZnO powder mixture with the addition of water (BMH), as well as solely by ball milling of mentioned powders (BM) and subsequent calcination at 700 掳C in air atmosphere. For comparison, the CaO路ZnO mixed oxide was also prepared using usual coprecipitation procedure (CP) followed by calcination at 700 掳C of the formed calcium zinc hydroxide hydrate. The BMH, BM and CP catalysts were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), infrared spectroscopy (FTIR), particle size distribution measurement and scanning electron microscopy (SEM and SEM-EDS). In addition, specific surface area (BET), solubility in methanol at 60 掳C and alkalinity (Hammett indicator method) were also determined. The activity of BMH, BM and CP catalysts for biodiesel synthesis were tested at 60 掳C and 1 bar, using molar ratio of sunflower oil to methanol of 1:10 and with 2 wt%of catalyst based on oil weight.