A study on the influence of cohesive zone interface element strength parameters on mixed mode behaviour

详细信息	查看全文 | 推荐本文 |

• 作者：Paul W. Harper^a ; Lu Sun^b ; Stephen R. Hallett^a ; ^{Stephen.Hallett@bristol.ac.uk}
• 关键词：A. Polymer&ndash ; matrix composites (PMCs) ; B. Delamination ; B. Fracture ; C. Finite element analysis
• 刊名：Composites Part A ; Applied Science and Manufacturing (Incorporating Composites and Composites Manufacturing)
• 出版年：2012
• 期刊代码：17_1359835x
• 类别：ms
• 出版时间：April, 2012
• 卷：43
• 期：4
• 页码：722-734
• 文件大小：3119 K

摘要

This paper presents a detailed study of the influence of maximum interfacial stress on interface element analyses for composites delamination. The development of the non-linear cohesive zone ahead of a crack tip is analysed with respect to length, stress distribution and mode ratio. The energy absorbed by interface elements is compared with the crack tip strain energy release rate from fracture mechanics analyses. These studies are performed initially on standard fracture toughness specimens, where mode-ratio is fixed by the applied displacement constraints. Results show close agreement with linear elastic fracture mechanics solutions. A simple ply drop specimen is then modelled, where the mode ratio is not constrained by the boundary conditions, and results are compared with the Virtual Crack Closure Technique. In this case maximum interfacial stress has a far greater influence on the numerical results, due to its significant influence on cohesive zone length, mode ratio and energy absorbed.