Highly dispersed NiW/γ-Al₂O₃ catalyst prepared by hydrothermal deposition method

详细信息	查看全文 | 推荐本文 |

• 作者：Hao Wang ; Yu Fan ; Gang Shi ; Zhihong Liu ; Haiyan Liu ; Xiaojun Bao
• 关键词：Hydrothermal deposition method ; NiW/γ ; -Al₂O₃ catalyst ; High dispersion ; Dibenzothiophene ; Hydrodesulfurization
• 刊名：Catalysis Today
• 出版年：2007
• 期刊代码：13_09205861
• 类别：ce
• 出版时间：30 July 2007
• 卷：125
• 期：3-4
• 页码：149-154
• 文件大小：600 K

摘要

This article describes a novel hydrothermal deposition method for preparing highly dispersed NiW/γ-Al₂O₃ catalysts and demonstrates its advantages over the conventional impregnation method. Via the hydrothermal precipitation reactions between sodium tungstate and hydrochloric acid and between nickel nitrate and urea, respectively, the active species W and Ni were deposited on γ-Al₂O₃. In the hydrothermal deposition of WO₃, a surfactant hexadecyltrimethyl ammonium bromide (CTAB) was used to prevent the aggregation of WO₃. The characterization results obtained by means of X-ray photoelectron spectroscopy (XPS), N₂ adsorption and high-resolution transmission electron microscopy (HRTEM) measurements showed that compared with the catalyst prepared by the conventional impregnation method, the catalyst with the same metal contents prepared by the hydrothermal deposition had much higher W and Ni dispersion, higher specific surface area, larger pore volume, the significantly decreased slab length and slightly increased stacking degree of sulfided W species, leading to the significantly enhanced dibenzothiophene (DBT) hydrodesulfurization (HDS) activity. The DBT HDS assessment results also revealed that the catalyst containing 17.7 wt%WO₃ and 2.4 wt%NiO prepared by the hydrothermal deposition method had the similar DBT HDS activity as a commercial NiW/γ-Al₂O₃ catalyst containing 23 wt%WO₃ and 2.6 wt%NiO, resulting in the greatly decreased amount of active metals for achieving the same HDS activity.