Evaluation of microhardness, fracture toughness and residual stress in a thermal barrier coating system: A modified Vickers indentation technique

详细信息	查看全文 | 推荐本文 |

• 作者：W.G. Mao^a ; ^b ; ^c ; ^{ssamao@126.com} ; J. Wan^a ; ^c ; C.Y. Dai^a ; ^c ; ^{daicuiying@xtu.edu.cn} ; J. Ding^a ; ^c ; Y. Zhang^a ; ^c ; Y.C. Zhou^a ; ^c ; C. Lu^d
• 关键词：Thermal barrier coating ; Fracture toughness ; Residual stress ; Vickers indentation ; Microhardness
• 刊名：Surface and Coatings Technology
• 出版年：2012
• 期刊代码：106_02578972
• 类别：ms
• 出版时间：15 June, 2012
• 卷：206
• 期：21
• 页码：4455-4461
• 文件大小：1885 K

摘要

The evolution of microhardness, fracture toughness and residual stress of an air plasma-sprayed thermal barrier coating system under thermal cycles was investigated by a modified Vickers indentation instrument coupled with three kinds of indentation models. The results show that fracture toughness on the top coating surface after thermal cycles changes from 0.64 to 3.67 MPa m^1/2, and the corresponding residual stress near the indented region varies from 鈭?#xA0;36.8 to 鈭?#xA0;243 MPa. For the interface region of coating and bond coat, fracture toughness in the coating close to interface ranges from 0.11 to 0.81 MPa m^1/2, and residual stress varies from 鈭?#xA0;5 to 鈭?#xA0;30 MPa, which are consistent with available data. For the lateral region of coating, fracture toughness and residual stress display strong gradient characteristics along the thickness direction due to the special layered structure.