The use of Taguchi optimization in determining optimum electrophoretic conditions for the deposition of carbon nanofiber on carbon fibers for use in carbon/epoxy composites

详细信息	查看全文 | 推荐本文 |

• 作者：Yi-Qi Wang^a ; Joon-Hyung Byun^b ; Byung-Sun Kim^b ; Jung-Il Song^a ; ^{jisong@changwon.ac.kr} ; Tsu-Wei Chou^c
• 刊名：Carbon
• 出版年：2012
• 期刊代码：10_00086223
• 类别：ms
• 出版时间：July, 2012
• 卷：50
• 期：8
• 页码：2853-2859
• 文件大小：1211 K

摘要

Vapor grown carbon nanofibers (VGCNFs) were deposited on carbon fibers (CFs) using electrophoretic deposition (EPD). Composites of the resulting hybrid material (CF-VGCNF) in an epoxy matrix were fabricated by the vacuum-assisted resin transfer molding process. The electrical conductivities of the composites were significantly improved compared to those without the VGCNF reinforcement. The Taguchi method was used to optimize the EPD process conditions through the analysis of means and the analysis of variance for achieving a highly uniform deposition of carbon nanofibers. The parameters considered for optimization are: deposition time, applied voltage, concentration of VGCNF in a distilled water suspension, and the distance between anode (a carbon fabric) and cathode (a copper plate). An orthogonal array of L₉ (3⁴) was created in the statistical design of experiments. The through-thickness electrical conductivity of the composites produced using the optimum deposition conditions was more than 90 times that of carbon fiber/epoxy composites. When compared with the average electrical conductivity of the nine design experiments, the electrical conductivity of the CF-VGCNF/epoxy composite using a filler prepared under the optimum deposition conditions showed a 51%improvement.