摘要
为满足断续深孔加工直线度要求,设计了一款专用夹具,分别对其定位、夹紧、分度和导向元件进行设计和制造,并进行了误差分析。对设计的专用夹具进行了加工实验,结果表明,使用该夹具加工的断续深孔直线度较高,符合设计要求。
In order to meet the straightness requirement of intermittent deep holes processing, a special fixture is designed. The positioning, clamping, indexing and guiding elements are designed and manufactured respectively, and the final assembly test application and error analysis are carried out. The results show that the straightness of the intermittent deep hole machined by the fixture is high and meets the design requirements.
引文
[1] 王峻.20世纪深孔加工技术的兴衰及新突破——介绍SIED深孔加工集成技术[J].机械管理开发,2004(79):1-3.
[2] 王峻.现代深孔加工技术[M].哈尔滨:哈尔滨工业大学出版社,2005.
[3] 郭万川,梅碧舟.六点定位原理及其应用[J].机械,2007,34(3):49,52.
[4] 耿运祥.夹具概念设计的功能分析与推导[D].北京:北京工商大学,2002.
[5] 田培棠,石晓辉,米林.夹具结构设计手册[M].北京:国防工业出版社,2011.
[6] 陈建刚,陈杰峰,张昌明,等.定位误差分析与计算在机床夹具设计中的应用与研究[J].煤矿机械,2015,36(5):229-231.