摘要
通过实验方法研究了工作液电导率对中走丝电火花线切割机床加工工艺性指标的影响。分析了工作液电导率对加工状态(加工电压、加工电流)的影响规律;分析了工作液电导率对切割速度、表面粗糙度和加工精度(尺寸精度、腰鼓形和形状精度)工艺性指标的影响规律,从而确定了精加工工作液电导率上限值,保证中走丝电火花线切割机床工作液智能交换控制的可行性。
The influence of the working fluid conductivity on the multiple cutting process of MSWEDM was studied through experiments. The influence of the working fluid conductivity on machining states( machining voltage,machining current) and the influence of the working fluid conductivity on the cutting speed,surface roughness and machining accuracy( precision,waist drum shape and shape accuracy) were studied. So the limit value of working fluid conductivity in the finishing machining was determined,to ensure the feasibility of the working fluid intelligence exchange on MSWEDM.
引文
[1]王至尧.中国材料工程大典:第24卷:材料特种加工成形工程(上)[M].北京:化学工业出版社,2005.
[2]李明辉,杨振步,蒋文英.中走丝电火花线切割机的特点与发展趋势[J].航空制造技术,2011(8):24-27.
[3]李克君.电火花线切割机床工作液的智能交换方法及装置:中国,CN1020078991A[P].2010-12-31.
[4]陆霖琰.基于复合工作液的高速往复走丝电火花线切割加工研究[D].南京:南京航空航天大学,2011.
[5]朱宁,许庆平,朱伟根,等.低速走丝电火花线切割加工工艺研究[J].电加工模具,2008(3):59-63.
[6]伍俊,李明辉.电火花线切割加工中放电间隙电压变化特性[J].航空精密制造技术,2000,36(4):9-12.
[7]王笑,蔡长韬,倪亚辉.高速往复走丝线切割加工精度和表面质量的影响因素及改进措施[J].机械设计与制造,2009(5):264-265.
[8]程国柱.高低双速走丝电火花线切割多次切割及表面完整性研究[D].南京:南京航空航天大学,2009.
[9]刘志东,俞容亨.高速走丝电火花线切割机床多次切割的实现[J].中国机械工程,2007,18(20):2140-2413.
[10]李克君,刘康,刘祯明,等.第四代中走丝电火花线切割机床的核心技术[C]//2012年全国电火花线切割加工技术与市场研讨会暨江苏省特种加工学术年会,2012.