摘要
在辽宁忠旺集团有限公司的熔铸厂,利用自主研制的LIBS液态金属成分在线分析仪对熔融铝水的成分进行了在线监测.研究了通入探杆中氩气的最佳流量以及探测深度与氩气波动的规律,发现氩气流量为1~1.4L/min时,光谱强度最强,探测深度位于氩气压力波动范围在±300Pa,并且压力波动有规律时的位置,各元素浓度稳定性好;利用实验室分析得到的固样数据对设备进行了标定,长时间测试得到的在线监测结果为:Si、Fe、Cu、Mn、Cr的重复精度都小于2%;浓度在0.1%~1%之间的Si、Fe、Mg的测量偏差都小于0.01%,浓度低于0.1%的Cu、Mn、Cr的测量偏差都小于0.001%;探杆多次升降浓度测量的稳定性小于3%.LIBS液态金属成分分析仪的测量重复精度、测量偏差以及多次升降测量的稳定性都能满足工业现场要求,完全可以实现实时、在线监测熔融铝水的成分.
LIBS on-line analyzer for liquid metal composition,which is designed by the LIBS project group of Shenyang Institute of automation,Chinese Academy of Sciences,is a analytical system for on-line monitoring of molten metal components in the metallurgical industry.We used this system to monitor the composition of molten aluminum in melting and casting plant of Liaoning Zhongwang Group Co.,Ltd.After several months testing,we obtained that the optimum flow rate of argon in the probe tube is 1~1.4 L/min,and when the detection depth is located at the position where the pressure fluctuation range of argon is±300 Pa and the pressure fluctuation is regular,the concentration of each element is stable.Finally,we calibrated our equipment by solid sampling data from laboratory analysis.The obtained results of on-line monitoring are as follows:the repeatability accuracy of Si、Fe、Cu、Mn and Cr is less than 2%;the measurement deviationis less than 0.01%for Si,Fe,Mg(concentration is between 0.1%~1%),and is less than 0.001%for Cu,Mn and Cr(concentration is less than 0.1%);the stability of the multiple rise and fall of the probe is less than 3%.On-line monitoring data meet the requirements offactory,so we can realize real time and on-line monitoring the compositions of molten aluminum.
引文
[1]NOLLR.Laser-induced breakdown spectroscopy:fundamentals and applications[M].Berlin:Springer,2011.
[2]HAHND W,OMENETTO N.Laser-induced breakdown spectroscopy(LIBS),part II:Review of instrumental and methodological approaches to material analysis and applications to different fields[J].Applied Spectroscopy,2012,66(4):347-419.
[3]FORTESF,LASERNA J J.The development of fieldable laser-induced breakdown spectrometer:No limits on the horizon[J].Spectrochimica Acta Part A,2010,65(12):975-990.
[4]HADDADJ E,CANIONI L,BOUSQUET B.Good practices in LIBS analysis:review and advices[J].Spectrochimica Acta Part B,2014,101(3):171-182.
[5]PATHAKA K,KUMAR R,SINGH V K,et al.Assessment of LIBS for spectrochemical analysis:a review[J].Applied Spectroscopy Reviews,2012,47(1):14-40.
[6]YUAN T B,WANG Z,LUI S L.Coal property analysis using laser-induced breakdown spectroscopy[J].Journal of Analytical Atomic Spectrometry,2013,28(7):1045-1053.
[7]GUO L B,HAO Z Q,SHEN M,et al.Accuracy improvement of quantitative analysis by spatial confinement in laserinduced breakdown spectroscopy[J].Optics Express,2013,21(15):18188-18195.
[8]WANG Z,YUAN T B,HOU Z Y,et al.Laser-induced breakdown spectroscopy in China[J].Frontiers of Physics,2014,9(4):419-438.
[9]YU J,ZENG R E.Laser-induced plasma and laser-induced breakdown spectroscopy(LIBS)in China:The challenge and the opportunity[J].Frontiers of Physics,2012,7(6):647-648.
[10]FENGY,YANG J J,FAN J M.et al.Investigation of laser-induced breakdown spectroscopy of a liquid jet[J].Applied Optics,2010,49(13):C70-C74.
[11]ZHOUW D,LI K X,SHEN Q M.Optical emission enhancement using laser ablation combined with fast pulse discharge[J].Optics Express,2010,18(3):2573-2578.
[12]ZHAO Y,ZHANG L,YIN W B,et al.Homogeneous-material-based calibration method for correcting laser-induced breakdown spectroscopy measurement-error bias in the case of dust pollution[J].Applied Optics,2017,56(35)9644-9648.
[13]YU Jian-hua,DONG Mei-rong,LU Ji-dong,et al.Spectral characteristics analysis of laser-induced nitrogen in organic materials[J].Acta Photonica Sinica,2016,45(10):1030003.余建华,董美蓉,陆继东,等.激光诱导有机物中氮元素的光谱特性分析[J].光子学报,2016,45(10):1030003.
[14]XIU Jun-shan,HOU Hua-ming,ZHONG Shi-lei,et al.Quantitative determination of heavy metal element Pb in aqueous solution by laser-induced breakdown spectroscopy using paper slice substrates[J].Chinese Journal of Lasers,2011,38(8):0815003.修俊山,候华明,钟石磊,等.以滤纸为基质利用LIBS定量分析水溶液中铅元素[J].中国激光,2011,38(8):0815003.
[15]DONG Feng-zhong,CHEN Xing-long,WANG QI,et al.Recent progress on the application of LIBS for metallurgical online analysis in China[J].Frontiers In Physics,2012,7(6):679-689.
[16]HUDSONS W,CRAPARO J,SARO R D,et al.Applications of Laser-Induced Breakdown Spectroscopy(LIBS)in molten metal processing[J].Metallurgical and Materials Transactions B,2017,48(5):2731-2742.
[17]NOLLR,BETTE H,BRYSCH A,et al.Laser-induced breakdown spectrometry applications for production control and quality assurance in the steel industry[J].Spectrochimica Acta Part B,2001,56(6):637-649.
[18]PETERL,STURM V,NOLL R.Liquid steel analysis with laser-induced breakdown spectrometry in the vacuum ultraviolet[J].Applied Optics,2003,42(30):6199-6204.
[19]PALANCO S,CONESA S,LASERNA J J.Analytical control of liquid steel in an induction melting furnaceusing a remote laser induced plasma spectrometer[J].Journal of Analytical Atomic Spectrometry,2004,19(4):462-467.
[20]RAIA K,YUEH F Y,SINGH J P.Laser-induced breakdown spectroscopy of molten aluminum alloy[J].Applied Optics,2003,42(12):2078-2084.
[21]RAIA K,YUEH F Y,SINGH J P,et al.High temperature fiber optic laser-induced breakdown spectroscopy sensor for analysis of molten alloy constituents[J].Review of Scientific Instruments,2002,73(10):3589-3599.
[22]SARO R D,WEISBERG A,CRAPARO J.In situ,real time measurement of melt constituents in the aluminum,glass,and steel industries,in final report prepared for the U.S.department of energy under award number DE-FC02-99CH10974[R].2005.
[23]BARILE,STONGE L,SABSABI M,et al.Novel method for on-line chemical analysis of continuous galvanizing baths,association for iron and steel technology[R].AISTECH,Chicago,IL,United states,2004,1095-1104.
[24]SABSABIM,CIELO P,Quantitative analysis of aluminum alloys by laser-induced breakdown spectroscopy and plasma characterization[J].Applied Spectroscopy,1995,49(4):499-507.
[25]SUN L X,YU H B,CONG Z B,et al.In situ analysis of steel melt by double-pulse laser-induced breakdown spectroscopy with a Cassegrain telescope[J].Spectrochimica Acta Part B,2015,112:40-48.
[26]SUN L X,YU H B,CONG Z B,et al.Applications of laser-induced breakdown spectroscopy in the aluminum electrolysis industry[J],Spectrochimica Acta Part B,2018,142:29-36.
[27]CHEN Xing-long,DONG Feng-zhong,WANG Jing-ge,et al.Slag quantitative analysis based on PLS model by laserinduced breakdown spectroscopy[J].Acta Photonica Sinica,2014,43(9):093002.陈兴龙,董凤忠,王静鸽等.PLS算法在激光诱导击穿光谱分析炉渣成分中的应用[J].光子学报,2014,43(9):093002.