汽车内饰塑料件(聚丙烯)光泽度的影响因素
摘要
研究了汽车内饰塑料件(聚丙烯)光泽度的影响因素,分析表明,注塑工艺、模具光泽度、模具清洁度和后加工工序均会影响汽车内饰塑料件(聚丙烯)的光泽度。适当增大保压压力,相应塑料件复制模具光泽度的能力提高,表面光泽度降低;通过喷砂降低模具光泽度,相应塑料件表面光泽度随之降低;采用天拿水清洁注塑模具表面的油污后,相应塑料件可避免受污染,表面光泽度发生变化;减少后加工工序对塑料件表面的磨损,也有助于保证塑料件表面光泽度的一致性。
引文
[1]蔡琼宇.关于汽车内饰件产品的皮纹模拟工艺介绍[J].时代汽车,2018,(06),146-147.
[2]龚佳兰,胡晓璇.汽车皮纹的纹理设计分析[J].南方农机,2017,48(22),41.
[3]孟涛,张志强,曹崴,等.汽车内饰用耐热级ABS树脂光泽度的影响因素[J].工程塑料应用,2018,46(2),26-30.Meng Tao,Zhang Zhiqiang,Cao Wei,et al.Affecting factors on gloss of heat-resistant ABS resin used in automobile interior[J].Engineering Plastics Application,2018,46(2):26-30.
[4]柏莲桂,胡建建,李强.注塑工艺对哑光PC/ABS光泽度的影响[J].上海塑料,2015,(03),46-48.Bai Liangui,Hu jianjian,Li Qiang.Influence of Injection Molding on Gloss of Matt PC/ABS[J].Shanghai Plastics,2015,(03),46-48.
[5]张志强,曹崴,杨慧,等.成型温度对PP和ABS试样表面颜色和光泽度的影响[J].工程塑料应用,2017,45(5),69-73.Zhang Zhiqiang,Cao Wei,Yang Hui,et al.Infl uence of Molding Temperature on Color and Gloss of PP and ABS Parts[J].Engineering Plastics Application,2017,45(5),69-73.
[6]李伟,何海龙,吴国峰,等.增韧剂含量和黏度对聚丙烯复合材料光泽度的影响[J].塑料工业,2018,46(4),33-36+88.Li Wei,He Hailong,Wu Guofeng,et al.Effect of the Content and the Melt Viscosity of Toughening Agent on the Gloss of PPComposites[J].China Plastics Industry,2018,46(4),33-36+88.
[7]刘西文,杨中文.注射成型工艺条件对聚丙烯制品光泽度的影响[J].中国塑料,2011,25(1),76-79.Liu Xiwen,Yang Zhongwen.Effects of injection molding parameters on glossiness of polypropylene parts[J].China Plastics,2011,25(1),76-79.
[8]赵金德,宋振彪,吴丽明,等.影响ABS产品光泽度的因素[C].吉林省第七届科学技术学会年会,长春,2012,105-107.Zhao Jinde,Song Zhenbiao,Wu Liming,et al.Factors affecting the glossiness of ABSproducts[C].The Seventh Annual Conference on Science and Technology in Jilin,Changchun,2012,105-107.
[9]胡慧林,陆书来,陶悦,等.影响高光黑色ABS树脂光泽度因素分析[J].塑料工业,2017,45(2),112-114.Hu Huilin,Lu Shulai,Tao Yue,et al.The analysis of contributory factors to high-gloss black ABSresin[J].China Plastics Industry,2017,45(2),112-114.
[10]李珊珊,马立波,张清梦.高光泽聚丙烯的研制及性能研究[J].科技经济导刊,2016,(25),43-44.
[2]龚佳兰,胡晓璇.汽车皮纹的纹理设计分析[J].南方农机,2017,48(22),41.
[3]孟涛,张志强,曹崴,等.汽车内饰用耐热级ABS树脂光泽度的影响因素[J].工程塑料应用,2018,46(2),26-30.Meng Tao,Zhang Zhiqiang,Cao Wei,et al.Affecting factors on gloss of heat-resistant ABS resin used in automobile interior[J].Engineering Plastics Application,2018,46(2):26-30.
[4]柏莲桂,胡建建,李强.注塑工艺对哑光PC/ABS光泽度的影响[J].上海塑料,2015,(03),46-48.Bai Liangui,Hu jianjian,Li Qiang.Influence of Injection Molding on Gloss of Matt PC/ABS[J].Shanghai Plastics,2015,(03),46-48.
[5]张志强,曹崴,杨慧,等.成型温度对PP和ABS试样表面颜色和光泽度的影响[J].工程塑料应用,2017,45(5),69-73.Zhang Zhiqiang,Cao Wei,Yang Hui,et al.Infl uence of Molding Temperature on Color and Gloss of PP and ABS Parts[J].Engineering Plastics Application,2017,45(5),69-73.
[6]李伟,何海龙,吴国峰,等.增韧剂含量和黏度对聚丙烯复合材料光泽度的影响[J].塑料工业,2018,46(4),33-36+88.Li Wei,He Hailong,Wu Guofeng,et al.Effect of the Content and the Melt Viscosity of Toughening Agent on the Gloss of PPComposites[J].China Plastics Industry,2018,46(4),33-36+88.
[7]刘西文,杨中文.注射成型工艺条件对聚丙烯制品光泽度的影响[J].中国塑料,2011,25(1),76-79.Liu Xiwen,Yang Zhongwen.Effects of injection molding parameters on glossiness of polypropylene parts[J].China Plastics,2011,25(1),76-79.
[8]赵金德,宋振彪,吴丽明,等.影响ABS产品光泽度的因素[C].吉林省第七届科学技术学会年会,长春,2012,105-107.Zhao Jinde,Song Zhenbiao,Wu Liming,et al.Factors affecting the glossiness of ABSproducts[C].The Seventh Annual Conference on Science and Technology in Jilin,Changchun,2012,105-107.
[9]胡慧林,陆书来,陶悦,等.影响高光黑色ABS树脂光泽度因素分析[J].塑料工业,2017,45(2),112-114.Hu Huilin,Lu Shulai,Tao Yue,et al.The analysis of contributory factors to high-gloss black ABSresin[J].China Plastics Industry,2017,45(2),112-114.
[10]李珊珊,马立波,张清梦.高光泽聚丙烯的研制及性能研究[J].科技经济导刊,2016,(25),43-44.