等离子熔化沉积TiC增强Inconel 718基原位自生复合材料显微组织及高温耐磨性
|
摘要
为改善镍基高温合金Inconel 718的高温耐磨性,利用同轴送粉等离子熔化沉积快速成形技术原位合成了TiC增强Inconel 718高温合金基高温耐磨复合材料。分析了复合材料的显微组织结构和原位自生过程,探讨了增强相TiC的含量对复合材料的显微硬度及高温干滑动摩擦磨损性能的影响规律,研究了复合材料的高温磨损机理。结果表明:复合材料组织细小致密,显微硬度随TiC增强相体积分数增加而相应提高;在高温干滑动磨损实验条件下,复合材料表现出优异的耐磨性。
In order to modify the high temperature wear resistance of Inconel 718 superalloy, TiC reinforced Inconel 718 superalloy based composites were in-situ synthesized by co-axial powder feeding plasma melting deposition technique. Microstructure and in-situ synthesis process of the composites was analyzed. The effect of volume fraction of the TiC reinforcing phase on microhardness and high temperature dry sliding wear properties of composites was discussed. The high temperature wear mechanism of the composites was also studied.Results show that the microstructure of composites is refined and dense. Microhardness values are remarkably influenced by the volume fraction of the TiC primary phase. The higher the volume fraction of the TiC primary phase, the higher the microhardness values of the composites. The composites exhibit excellent wear resistance under high temperature dry sliding wear test conditions.
In order to modify the high temperature wear resistance of Inconel 718 superalloy, TiC reinforced Inconel 718 superalloy based composites were in-situ synthesized by co-axial powder feeding plasma melting deposition technique. Microstructure and in-situ synthesis process of the composites was analyzed. The effect of volume fraction of the TiC reinforcing phase on microhardness and high temperature dry sliding wear properties of composites was discussed. The high temperature wear mechanism of the composites was also studied.Results show that the microstructure of composites is refined and dense. Microhardness values are remarkably influenced by the volume fraction of the TiC primary phase. The higher the volume fraction of the TiC primary phase, the higher the microhardness values of the composites. The composites exhibit excellent wear resistance under high temperature dry sliding wear test conditions.
引文
[1]SundararamanM,MukhopadhyayP,BanerjeeS.Acta Metallurgica[J], 1988, 36(4):847
[2]Chaturvedi M C, Ya fang Han. Metal Science[J], 1983, 17(3):145
[3]KimDuck-Hoi,KimJae-Hoon,SaJeong-Wooetal.MaterialsScienceandEngineeringA[J],2008,483-484(1):262
[4]DixAW,HyzakJM,SinghRP.Superalloys1992[C],Warrendale, PA:TMS, 1992:23
[5]Ramesh C S, Devaraj D S, Keshavamurthy R. Wear[J], 2011,271(9-10):1365
[6]Houghton A, Lewis R, Olofsson U. Wear[J], 2011, 271(9-10):1671
[7]Wilson J M, ShinJ C Y. Surface and Coatings Technology[J],2012, 207:517
[8]MaZhuang(马壮),LiWenzhi(李文智),GaoLihong(高丽红). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 46(8):2097
[9]Belei C, Fitseva V. Surface and Coating Technology[J], 2017,329:163
[10]SunShuyu(孙曙宇),LvWeijie(吕维洁).RareMetal MaterialsandEngineering(稀有金属材料与工程)[J],2017,46(3):0606
[11] Rasool G, Mridha S, Stack M M. Wear[J], 2015, 328-329:498
[12] SheikhzadenM,SanjabiS.MaterialsandDesign[J],2012,39:366
[13] GorjiMR,EdtmaierC,SanjabiS.Materials&Design[J],2017, 125:167
[14] HongChen,GuDongdong.Optics&LaserTechnology[J],2013, 54:98
[15] ShiQimin(石齐民),GuDongdong(顾东东),GuRonghai(顾荣海)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 46(6):1543
[16] Zhang Haiou, Xu Jipeng, Wang Guilan. Surface and Coatings Technology[J], 2003, 171(1-3):112
[17] ThakurDG,RamamoorthyB,VijayaraghavanL.Materials&Design[J], 2009, 30(5):1718
[18] SwetaSaroj,ChinmayaKumarSahoo,ManojMasanta.JournalofMaterialsProcessingTechnology[J],2017,249:490
[19] JiaQingbo,GuDongdong.Optics&LaserTechnology[J],2014, 62:161
[20] ChlebusE,GruberK,Ku?nickaBetal.MaterialsScience and Engineering A[J], 2015, 639:647
[21] TanjaTrosch,JohannesStr??ner,RainerV?lkletal.Materials Letters[J], 2016, 164:428
[22] Courbon C, Pusavec F, Dumont F. Tribology International[J],2013, 66:72
[23] Kim Young Kwan, Shim Jae-Hyeok, Cho Young Whanet al.InternationalJournalofRefractoryMetalsandHard Materials[J], 2004, 22(4-5):193
[24] PuFei(蒲飞),LiuYuanfu(刘元富),XuXiangyang(徐向阳)et al. Chinese laser(中国激光)[J], 2014, 41:1
[25] IhsanBarin(伊赫桑·巴伦).ThermochemicalDataofPureSubstance(纯物质热化学数据手册)[M].Beijing:Science Press, 2003:1674
[26] Nam P Suh. Wear[J], 1997, 44(1):1
[27] WangHuanrong(王焕荣),YeYifu(叶以富),MinGuanghui(闵光辉)et al. Chinese Science Bulletin(科学通报)[J], 2001,46(3):215
[2]Chaturvedi M C, Ya fang Han. Metal Science[J], 1983, 17(3):145
[3]KimDuck-Hoi,KimJae-Hoon,SaJeong-Wooetal.MaterialsScienceandEngineeringA[J],2008,483-484(1):262
[4]DixAW,HyzakJM,SinghRP.Superalloys1992[C],Warrendale, PA:TMS, 1992:23
[5]Ramesh C S, Devaraj D S, Keshavamurthy R. Wear[J], 2011,271(9-10):1365
[6]Houghton A, Lewis R, Olofsson U. Wear[J], 2011, 271(9-10):1671
[7]Wilson J M, ShinJ C Y. Surface and Coatings Technology[J],2012, 207:517
[8]MaZhuang(马壮),LiWenzhi(李文智),GaoLihong(高丽红). Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 46(8):2097
[9]Belei C, Fitseva V. Surface and Coating Technology[J], 2017,329:163
[10]SunShuyu(孙曙宇),LvWeijie(吕维洁).RareMetal MaterialsandEngineering(稀有金属材料与工程)[J],2017,46(3):0606
[11] Rasool G, Mridha S, Stack M M. Wear[J], 2015, 328-329:498
[12] SheikhzadenM,SanjabiS.MaterialsandDesign[J],2012,39:366
[13] GorjiMR,EdtmaierC,SanjabiS.Materials&Design[J],2017, 125:167
[14] HongChen,GuDongdong.Optics&LaserTechnology[J],2013, 54:98
[15] ShiQimin(石齐民),GuDongdong(顾东东),GuRonghai(顾荣海)et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J], 2017, 46(6):1543
[16] Zhang Haiou, Xu Jipeng, Wang Guilan. Surface and Coatings Technology[J], 2003, 171(1-3):112
[17] ThakurDG,RamamoorthyB,VijayaraghavanL.Materials&Design[J], 2009, 30(5):1718
[18] SwetaSaroj,ChinmayaKumarSahoo,ManojMasanta.JournalofMaterialsProcessingTechnology[J],2017,249:490
[19] JiaQingbo,GuDongdong.Optics&LaserTechnology[J],2014, 62:161
[20] ChlebusE,GruberK,Ku?nickaBetal.MaterialsScience and Engineering A[J], 2015, 639:647
[21] TanjaTrosch,JohannesStr??ner,RainerV?lkletal.Materials Letters[J], 2016, 164:428
[22] Courbon C, Pusavec F, Dumont F. Tribology International[J],2013, 66:72
[23] Kim Young Kwan, Shim Jae-Hyeok, Cho Young Whanet al.InternationalJournalofRefractoryMetalsandHard Materials[J], 2004, 22(4-5):193
[24] PuFei(蒲飞),LiuYuanfu(刘元富),XuXiangyang(徐向阳)et al. Chinese laser(中国激光)[J], 2014, 41:1
[25] IhsanBarin(伊赫桑·巴伦).ThermochemicalDataofPureSubstance(纯物质热化学数据手册)[M].Beijing:Science Press, 2003:1674
[26] Nam P Suh. Wear[J], 1997, 44(1):1
[27] WangHuanrong(王焕荣),YeYifu(叶以富),MinGuanghui(闵光辉)et al. Chinese Science Bulletin(科学通报)[J], 2001,46(3):215
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |