2-RPR+RRP球面混联机构的可达工作空间研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research of Reachable Workspace of 2-RPR+RRP Spherical Hybrid Mechanism 作者：赵建文 ; 宋胜涛 ; 李瑞琴 ; 李大海 英文作者：Zhao Jianwen;Song Shengtao;Li Ruiqin;Li Dahai;School of Mechanical and Power Engineering,North University of China; 关键词：自由度 ; 封闭正解 ; 可达工作空间 英文关键词：Degree of freedom;;Closed positive solution;;Reachable workspace 中文刊名：JXCD 英文刊名：Journal of Mechanical Transmission 机构：中北大学机械与动力工程学院; 出版日期：2017-01-15 出版单位：机械传动 年：2017 期：v.41;No.241 基金：国家自然科学基金(51275486) 语种：中文; 页：JXCD201701006 页数：4 CN：01 ISSN：41-1129/TH 分类号：29-32

摘要

研究2-RPR+RRP球面混联机构的可达工作空间,首先,应用修正的Kutzbach-Grvbler公式对机构的自由度进行求解,得出了机构的自由度以及动平台的运动特性;其次,以机构的几何关系为约束条件,结合旋转矩阵建立了机构的运动学位置封闭正解数学模型;最后,根据运动学正解模型应用MATLAB软件绘制出动平台参考点在特定条件下的可达工作空间,并利用SolidWorks仿真软件对同条件下的可达工作空间进行了验证。证明了正解模型的正确性,为机构进一步分析与优化提供了理论基础。
        The reachable workspace of 2- RPR + RRP spherical hybrid mechanism is researched. Firstly,the degree of freedom of the mechanism is solved by the modified Kutzbach- Grvbler formula,the degree of freedom of the mechanism and the motion characteristics of moving platform are obtained. Secondly,taking the geometric relation of mechanism as the constraint condition and combining with the rotation matrix,the mathematical model of the closed positive solution of the kinematics position of the mechanism is established. Finally,according to the positive kinematics solution model,the Matlab software is used to draw up the workspace of the reference point in the specific condition,and the reachable workspace of the same conditions is verified by using the Solid Works simulation software. The correctness of the positive solution model is proved,a theoretical basis for the further analysis and optimization of the mechanism is provided.

引文

[1]范建凯.球面并联式人形机器人髋关节仿生若干基础理论研究[D].秦皇岛:燕山大学,2015:16-17.
    [2]胡鑫喆.基于球面并联机构的人形机器人肩关节仿生设计[D].秦皇岛:燕山大学,2014:24-25.
    [3]GOSSELIN C M,ANGELES J.The optimum kinematics design of a spherical 3-DOF parallel manipulator[J].ASME Journal of Mechanisms Transmissions and Automation in Design,1989,111(2):202-207.
    [4]曾宪菁,黄田,曾子平.3-RRR型数控回转台的精度分析[J].机械工程学报,2001,37(11):42-45.
    [5]李大海,宋胜涛,李瑞琴,等.对称型平面3-RRR并联机构可达工作空间研究[J].机械传动,2015,39(9):29-31.
    [6]ENFERADI J,TOOTOONCHI A A.Accuracy and stiffness analysis of a 3-RRP spherical parallel manipulator[J].Robotica,2011,29(2):193-209.
    [7]HOU Y L,HU X Z,ZENG D X.Kinematics Analysis of a 3-RRR Spherical Parallel Mechanism with Coaxial Input Shafts[J].Applied Mechanics and Materials,2013,404:237-243.
    [8]黄真,赵永生,赵铁石.高等空间机构学[M].北京:高等教育出版社,2006:146-147.