摘要
针对气动电磁阀响应特性参数测量问题,对检测原理进行了介绍,设计了一套综合测试系统。参照《专用检测设备评定方法指南》计算得到的系统测量能力指数Cg、Cgk均为1.33,满足设备验收要求,可以测量工作压力在0~1 MPa,响应时间在ms级别的气动电磁阀的响应时间、泄漏、最大切换频率、启动气压等参数。
This paper introduces the principle of pneumatic solenoid valve response characteristic parameter measurement and designs a comprehensive measurement system. According to the"special test equipment evaluation guide",its measurement capability index Cg and Cgk are both more than 1.33,which meet the equipment acceptance requirements. The system can be used to measure the response time,leakage,maximum switching frequency,starting air pressure and other parameters of the pneumatic solenoid valve with response time at ms level and working pressure in the 0-1 MPa.
引文
[1]范翔.车用电磁阀测试系统的研究[D].杭州:浙江大学,2010.
[2]张德虎.基于UG的高速开关阀的仿真研究[J].西南科技大学学报,2009,24(4):67-69.
[3]何思奇.电磁阀全自动测试系统的设计与实现[D].哈尔滨:哈尔滨工业大学,2007.
[4]唐磊,韩建海,赵书尚,等.基于高速开关阀微调的气压精密控制[J].液压与气动,2009(9):9-11.
[5] ISO 12238:2001,Pneumatic fluid power—Directional control valves—Measurement of shifting time[S].
[6]董彩凤.气动电磁阀动态特性的测试标准和试验研究[D].杭州:浙江大学,2013.
[7]马亮.电磁阀检测仪的设计和应用[D].武汉:武汉科技大学,2009.
[8]郑培根.气动电磁阀综合性能测试系统的研究[D].杭州:浙江大学,2011.
[9]李全令.嵌入式气动电磁阀性能检测仪的研制[D]杭州:中国计量学院,2012.
[10]Chu L,Hou Y L,Liu M H,et al. Study on the Dynamic Characteristics of Pneumatic ABS Solenoid Valve for Commercial vehicle[C]. 2007 IEEE,2007:641-644.
[11]孟强.基于STM32的数据采集系统设计[D].南京:南京林业大学,2014.
[12]肖涧.一种基于嵌入式技术的测控系统的设计与实现[D].广州:中山大学,2010.