螺纹加工刀具丝锥和板牙的参数化建模方法研究
|
摘要
螺纹加工刀具丝锥和板牙的规格较多,在进行模型设计时需要重复性的操作,使设计效率大为降低。为提高设计效率,基于三维建模软件SolidWorks 2016和计算机编程语言Visual Basic 6.0对其进行了参数化建模。结果表明:通过开发的程序,能直接修改丝锥和板牙的三维模型数据,定制出新的丝锥、板牙模型。
Because the cutting angles of threaded cutting tool screw tap & threading die are more, the generation of screw thread is more complicated. Moreover, screw tap & threading die have many specifications and require repetitive operation when drawing, which greatly reduces the design efficiency of screw tap &threading die. In order to improve the design efficiency of screw tap & threading die, parametric modeling of the screw tap & threading die is studied based on the 3 D modeling software SolidWorks 2016 and the computer programming language Visual Basic 6.0. The results showed that the parametric modeling of screw tap&threading die is realized.
Because the cutting angles of threaded cutting tool screw tap & threading die are more, the generation of screw thread is more complicated. Moreover, screw tap & threading die have many specifications and require repetitive operation when drawing, which greatly reduces the design efficiency of screw tap &threading die. In order to improve the design efficiency of screw tap & threading die, parametric modeling of the screw tap & threading die is studied based on the 3 D modeling software SolidWorks 2016 and the computer programming language Visual Basic 6.0. The results showed that the parametric modeling of screw tap&threading die is realized.
引文
[1]谭建华.浅谈螺纹的数控铣削加工[J].中国设备工程,2017(6):131-132.
[2]姚建平,邓远超,赵丽.基于SolidWorks的丝锥三维模型与二维图形的双向尺寸驱动[J].工具技术,2010,44(3):72-75.
[3]牛拴平,王建卫.基于UG的丝锥参数化建模与丝锥库建立[J].工具技术,2016,50(11):115.
[4]刘敏,何智敏.基于Solidworks的阶梯轴类零件参数化设计研究[J].电脑编程技巧与维护,2013(4):58-61.
[5]索超,李玉翔,林树忠.基于VB语言对SolidWorks参数化设计的二次开发[J].制造业自动化,2013,35(8):137-139.
[6]孙付春.李玉龙.基于SolidWorks API的渐开线齿轮的参数化建模[J].中国农机化学报,2014,35(1):202-204.
[7]徐宏海,华利敏,詹宁.基于VB和SolidWorks的调节阀参数化设计[J].机电工程技术,2009,38(4):30-32.
[8]何远超.基于SolidWorks的离心通风机参数化设计及研究[D].淮南:安徽理工大学,2011.
[9]叶修梓,陈超祥.SolidWorks高级教程:二次开发与API[M].北京:机械工业出版社,2009.
[10]韩泽光,孙君祥,郝瑞琴.基于VB对SolidWorks参数化设计的二次开发[J].机电产品开发与创新,2017,30(5):79-81.
[2]姚建平,邓远超,赵丽.基于SolidWorks的丝锥三维模型与二维图形的双向尺寸驱动[J].工具技术,2010,44(3):72-75.
[3]牛拴平,王建卫.基于UG的丝锥参数化建模与丝锥库建立[J].工具技术,2016,50(11):115.
[4]刘敏,何智敏.基于Solidworks的阶梯轴类零件参数化设计研究[J].电脑编程技巧与维护,2013(4):58-61.
[5]索超,李玉翔,林树忠.基于VB语言对SolidWorks参数化设计的二次开发[J].制造业自动化,2013,35(8):137-139.
[6]孙付春.李玉龙.基于SolidWorks API的渐开线齿轮的参数化建模[J].中国农机化学报,2014,35(1):202-204.
[7]徐宏海,华利敏,詹宁.基于VB和SolidWorks的调节阀参数化设计[J].机电工程技术,2009,38(4):30-32.
[8]何远超.基于SolidWorks的离心通风机参数化设计及研究[D].淮南:安徽理工大学,2011.
[9]叶修梓,陈超祥.SolidWorks高级教程:二次开发与API[M].北京:机械工业出版社,2009.
[10]韩泽光,孙君祥,郝瑞琴.基于VB对SolidWorks参数化设计的二次开发[J].机电产品开发与创新,2017,30(5):79-81.