回转式粉末润滑界面原位观察机的多目标优化设计

详细信息    查看全文 | 推荐本文 |

英文篇名：Multi-objective optimization design of in-situ observation device for rotary powder lubrication interface 作者：孔俊超 ; 李晓光 ; 徐兵 ; 吴海兵 ; 华家宝 ; 陈世雨 英文作者：KONG Junchao;LI Xiaoguang;XU Bing;WU Haibing;HUA Jiabao;CHEN Shiyu;College of Mechanical and Electronic Engineering, Chaohu College;Department of Mechanical and Electrical Engineering, Anhui Food Engineering Vocational College; 关键词：回转式 ; 粉末润滑 ; 原位观察 ; 优化设计 英文关键词：rotary;;powder lubrication;;in-situ observation;;optimized design 中文刊名：HNFZ 英文刊名：Journal of Henan University of Engineering(Natural Science Edition) 机构：巢湖学院机械工程学院;安徽粮食工程职业学院机电工程系; 出版日期：2019-06-25 14:07 出版单位：河南工程学院学报(自然科学版) 年：2019 期：v.31;No.106 基金：安徽省高等学校自然科学研究项目(KJ2015A281);; 巢湖学院校级项目(XLY-201804) 语种：中文; 页：HNFZ201902010 页数：4 CN：02 ISSN：41-1397/N 分类号：44-47

摘要

设计了一种由主运动机构、加载机构组成的回转式粉末润滑原位观察试验机,下试件(玻璃)作回转运动,玻璃上有均匀分布的石墨粉末,玻璃、石墨、上试件之间的接触副是面接触,通过螺旋传动机构改变外载荷的大小。试验机在显微镜的平台上搭建空间有限,而且带轮质量大则试验台形变大,会严重影响采集图像的质量。通过V带轮的多目标优化设计,带轮的中心距a和总质量m明显变小,说明该优化设计效果明显,具有很好的实用价值。
        An in-situ observation device is designed for rotary powder lubrication interface. It composes main motion and load mechanism. The downward specimen(glass) do rotation motion, graphite powder is evenly distributed. Glass, graphite and specimen is surface contact. Load is changed by screw drive mechanism. Space of the device is limited to build on microscope platform. When quality of pulley is larger, then deformation of test bench is larger, so quality of captured images is bad. Center distance and total mass of pulley are significantly reduced by multi-objective optimization design of V belt pulley. This means optimization design have obvious effects and good practical value.

引文

[1] 王伟,刘焜.颗粒流润滑的现状和展望[J].摩擦学学报,2008,28(6):567-575.
    [2] 王伟,孔俊超,顾伟,等.温成形摩擦界面粉末润滑层宏微观特性的试验研究[J].摩擦学学报,2016,36(2):233-239.
    [3] TAN G B,LIU S H,WANG D G,et al.In-situ observation of wax-in-oil flow in rough soft contact[J].Tribology Letters,2013,52(1):93-103.
    [4] WEIDEL S,ENGEL U,MERKLEIN M,et al.Basic investigations on boundary lubrication in metal forming processes by in-situ observation of the real contact area[J].Production Engineering,2010,4(2):107-114.
    [5] 陈卓君,张祖立,贾春德,等.钢/玻璃的摩擦磨损性能动态观测研究[J].润滑与密封,2005(4):88-90.
    [6] 谭桂斌,刘书海,王德国,等.基于光学原位观测柔软摩擦副的接触率研究[J].中国科学:技术科学,2013,43(4):390-396.
    [7] 马志奇.普通V带传动极限速度和最佳速度计算[J].西北建筑工程学院学报(自然科学版),1999(2):55-58.
    [8] 覃金彩,史彬华,江全才.基于Matlab的V带传动多目标优化设计[J].三峡大学学报(自然科学版),2011,33(3):100-102.